{"product_id":"rheem-ambipower-280l-heat-pump-hot-water-system-2-4kw-hardwired","title":"Rheem Ambipower 280L Heat Pump Hot Water System (2.4kW HARDWIRED)","description":"\u003cpre\u003e\u003c\/pre\u003e\n\u003ch1\u003eRheem AmbiPower 280e 2.4kW Hardwired Heat Pump Hot Water System\u003c\/h1\u003e\n\u003cp\u003eThe \u003cstrong\u003eRheem AmbiPower 280e 2.4kW Hardwired Heat Pump Hot Water System\u003c\/strong\u003e is available from Installed Today as a \u003cstrong\u003esupply-only heat pump water heater\u003c\/strong\u003e or as a complete \u003cstrong\u003esupply and install package in selected Brisbane and Gold Coast service areas\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eChoose the unit only if you already have a licensed plumber and electrician arranged, or check your supply and install package to confirm standard installation, valve kit requirements, outdoor location suitability, drainage, electrical connection requirements, site access and available installation timeframes before checkout.\u003c\/p\u003e\n\u003cp\u003eThe Rheem AmbiPower 280e hardwired model is a larger-capacity heat pump hot water system designed for households wanting efficient hot water with stronger backup element support than the 10 amp plug-in version. With \u003cstrong\u003e280L capacity\u003c\/strong\u003e, \u003cstrong\u003eR290 natural refrigerant\u003c\/strong\u003e, \u003cstrong\u003ehigh COP performance\u003c\/strong\u003e, \u003cstrong\u003e2.4kW hardwired backup element\u003c\/strong\u003e, and suitability for up to \u003cstrong\u003e6 people\u003c\/strong\u003e under Rheem’s stated assumptions, it is a strong upgrade option for homes replacing an older electric storage hot water system.\u003c\/p\u003e\n\u003ch2\u003eAbout the Rheem AmbiPower 280e 2.4kW Hardwired Heat Pump\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eRheem AmbiPower 280e\u003c\/strong\u003e is part of Rheem’s AmbiPower heat pump range. It uses heat from the surrounding air to heat stored water, making it an energy-efficient alternative to a standard electric water heater.\u003c\/p\u003e\n\u003cp\u003eUnlike traditional solar hot water, the AmbiPower 280e does not rely on direct sunlight or roof-mounted collectors to heat water. Instead, it captures ambient heat from the air and transfers that heat into the stored water using heat pump technology.\u003c\/p\u003e\n\u003cp\u003eThis page is focused on the \u003cstrong\u003e2.4kW hardwired model\u003c\/strong\u003e, which is designed for properties where a suitable hardwired electrical connection is available or can be installed by a licensed electrician. The hardwired version uses a \u003cstrong\u003e2.4kW backup element\u003c\/strong\u003e, giving stronger boost and emergency heating support than the 10 amp plug-in version.\u003c\/p\u003e\n\u003ch2\u003eBuy Rheem AmbiPower 280e Hardwired Model Supply Only\u003c\/h2\u003e\n\u003cp\u003eOrder the \u003cstrong\u003eRheem AmbiPower 280e 2.4kW Hardwired Heat Pump\u003c\/strong\u003e online as a supply-only product. This option is ideal if you already have a licensed plumber, electrician or installer arranged and only need the unit supplied.\u003c\/p\u003e\n\u003cp\u003eThe supply-only product price is for the hot water system itself. Installation, old system removal, disposal, valve kits, electrical work, plumbing alterations, drainage changes, compliance upgrades and additional site requirements are not included unless selected separately as add-ons.\u003c\/p\u003e\n\u003cp\u003eSupply-only is best for customers searching for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eRheem AmbiPower 280e price\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRheem AmbiPower 280e hardwired model\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRheem 280L heat pump for sale\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRheem 551E280 heat pump\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRheem AmbiPower 280e supply only\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e280L heat pump hot water system supply only\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e2.4kW hardwired heat pump hot water system\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRheem R290 heat pump hot water system\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRheem AmbiPower 280e Supplied and Installed in Brisbane \u0026amp; Gold Coast\u003c\/h2\u003e\n\u003cp\u003eInstalled Today can supply and install the \u003cstrong\u003eRheem AmbiPower 280e 2.4kW Hardwired Heat Pump Hot Water System\u003c\/strong\u003e in selected Brisbane and Gold Coast service areas.\u003c\/p\u003e\n\u003cp\u003eThis option is designed for customers who want the heat pump supplied and professionally installed through one streamlined online order. The supply and install pathway helps confirm whether this system suits your property, whether a valve kit is required, whether the installation location is suitable, whether drainage is available, whether the electrical connection is suitable, and whether any additional installation add-ons may be needed before checkout.\u003c\/p\u003e\n\u003cp\u003eThe installed-from price is based on the product plus the matching standard installation option. Final pricing may vary depending on site access, electrical suitability, drainage, valve requirements, old system removal or disposal selections, pipework changes, base requirements, compliance requirements and selected add-ons.\u003c\/p\u003e\n\u003ch2\u003eRheem AmbiPower 280e Installation in Brisbane\u003c\/h2\u003e\n\u003cp\u003eFor Brisbane customers, the \u003cstrong\u003eRheem AmbiPower 280e hardwired heat pump\u003c\/strong\u003e can be ordered with supply and install options through Installed Today. This is suitable for homes replacing an existing electric hot water system where the current location, access, plumbing, drainage and electrical setup are suitable for the selected installation option.\u003c\/p\u003e\n\u003cp\u003eThe 280L size can be a strong fit for Brisbane family homes, townhouses, rental properties and households wanting to upgrade from standard electric storage to a more efficient heat pump hot water system with stronger backup element support.\u003c\/p\u003e\n\u003cp\u003eCustomers in selected Brisbane suburbs can complete the installation check before checkout to confirm whether standard heat pump installation, valve kit selection, drainage, electrical work, pipework, old system removal or disposal options may be required.\u003c\/p\u003e\n\u003cp\u003eThis makes the page suitable for customers searching for Rheem AmbiPower 280e installation Brisbane, Rheem heat pump supplied and installed Brisbane, and 280L heat pump hot water replacement Brisbane.\u003c\/p\u003e\n\u003ch2\u003eRheem AmbiPower 280e Installation in Gold Coast\u003c\/h2\u003e\n\u003cp\u003eGold Coast customers can also order the \u003cstrong\u003eRheem AmbiPower 280e 2.4kW Hardwired Heat Pump Hot Water System\u003c\/strong\u003e with supply and install options in selected service areas.\u003c\/p\u003e\n\u003cp\u003eThis pathway is useful for homeowners, landlords, property managers and renovators who want the product and installation organised together instead of buying the heat pump separately and arranging trades afterwards.\u003c\/p\u003e\n\u003cp\u003eComplete the supply and install check to confirm whether the existing setup is suitable and whether additional items such as valve kits, drainage, electrical connection requirements, pipework, base support, access requirements or old system disposal may be required.\u003c\/p\u003e\n\u003cp\u003eThis helps customers searching for Rheem AmbiPower 280e installed Gold Coast, Rheem heat pump installation Gold Coast, and 280L heat pump supply and install Gold Coast.\u003c\/p\u003e\n\u003ch2\u003eIs the Rheem AmbiPower 280e Hardwired Model Right for Your Home?\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eRheem AmbiPower 280e 2.4kW Hardwired Heat Pump\u003c\/strong\u003e may be suitable if you are replacing a standard electric storage hot water system and want a larger, energy-efficient heat pump option with stronger backup element capacity.\u003c\/p\u003e\n\u003cp\u003eIt is commonly suited to family homes, larger townhouses, rental properties and households wanting lower water heating energy use than a standard electric water heater.\u003c\/p\u003e\n\u003cp\u003eRheem lists the AmbiPower 280e as suitable for up to \u003cstrong\u003e6 people\u003c\/strong\u003e under stated usage assumptions. Real-world suitability depends on shower length, hot water usage, tariff setup, climate, installation location, airflow, drainage, electrical supply and household hot water habits.\u003c\/p\u003e\n\u003ch3\u003eThis system may suit you if:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eYou are replacing an existing electric hot water system\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eYou want a 280L heat pump hot water system\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eYour household has up to 6 people under Rheem’s stated assumptions\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eYou want the 2.4kW hardwired model\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eYou want stronger backup element support than the plug-in model\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eYour property has, or can be upgraded to suit, a compliant hardwired electrical connection\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eYou want a Rheem heat pump with R290 natural refrigerant\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eYou want a system that does not rely on direct sunlight\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eYou want touch screen LED control\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eYour property has suitable airflow, drainage and installation space\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eYou want the choice of supply only or supply and install\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eExtra work may be required if:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eThe system is being moved to a new location\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThe existing electrical connection does not suit the hardwired model\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eA licensed electrician is required to alter or upgrade the circuit\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eExisting valves are old, missing or non-compliant\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eExtra pipework or drainage changes are needed\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAccess is restricted\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eA compliant base, tray, drainage or insulation is required\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThe old system needs additional removal or disposal work\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThe installation location has poor airflow or unsuitable clearances\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThe existing setup does not suit a heat pump installation\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKey Features of the Rheem AmbiPower 280e Hardwired Model\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e280L heat pump hot water system\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e2.4kW hardwired backup element\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSuitable for up to 6 people under Rheem’s stated usage assumptions\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUses heat from surrounding air to heat water\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDoes not rely on direct sunlight\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSmart energy-efficient alternative to a standard electric water heater\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHigh COP of 5.2 under stated test conditions\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCan save up to 73.9% on water heating energy consumption in Zone 3 compared with an electric water heater under Rheem’s stated conditions\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eR290 natural refrigerant\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eR290 refrigerant listed with GWP under 3\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAdvanced wraparound microchannel heating technology\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDesigned for uniform and faster water heating\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSuitable for cold climates with operating range from -6°C to +43°C\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSuitable for harsh water conditions\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eEnamel lined water tank to help reduce corrosion risk\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSide fan design for airflow and weather protection\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePainted sheet metal outer shell\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAluminium top cover to help reduce corrosion\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUser-friendly touch screen LED display\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eProduct performance information through controller\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eEligible for STCs where requirements are met\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMay be eligible for additional incentives in some states\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eStandard and Blue Anode model options available\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e10-year cylinder supply warranty under Rheem warranty terms\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e3-year cylinder labour warranty under Rheem warranty terms\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e3-year sealed system supply and labour warranty under Rheem warranty terms\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1-year parts supply and labour warranty under Rheem warranty terms\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eQuick Specs\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e Rheem\u003cbr\u003e\u003cstrong\u003eRange:\u003c\/strong\u003e AmbiPower Heat Pump\u003cbr\u003e\u003cstrong\u003eProduct:\u003c\/strong\u003e Rheem AmbiPower 280e Heat Pump\u003cbr\u003e\u003cstrong\u003eModel Family:\u003c\/strong\u003e 551E280\u003cbr\u003e\u003cstrong\u003eSystem Type:\u003c\/strong\u003e Heat Pump Hot Water System\u003cbr\u003e\u003cstrong\u003eCapacity:\u003c\/strong\u003e 280L\u003cbr\u003e\u003cstrong\u003eRecommended Household Size:\u003c\/strong\u003e Up to 6 people under Rheem’s stated usage assumptions\u003cbr\u003e\u003cstrong\u003eConnection Type:\u003c\/strong\u003e Hardwired electrical connection\u003cbr\u003e\u003cstrong\u003eHardwired Backup Element:\u003c\/strong\u003e 2.4kW\u003cbr\u003e\u003cstrong\u003ePlug-In Backup Element:\u003c\/strong\u003e 1.5kW on plug and lead versions\u003cbr\u003e\u003cstrong\u003eRefrigerant:\u003c\/strong\u003e R290 natural refrigerant\u003cbr\u003e\u003cstrong\u003eListed Refrigerant GWP:\u003c\/strong\u003e Under 3\u003cbr\u003e\u003cstrong\u003eCOP:\u003c\/strong\u003e 5.2 under stated test conditions\u003cbr\u003e\u003cstrong\u003eHeating Technology:\u003c\/strong\u003e Advanced wraparound microchannel heating\u003cbr\u003e\u003cstrong\u003eOperating Climate Suitability:\u003c\/strong\u003e -6°C to +43°C\u003cbr\u003e\u003cstrong\u003eControl Type:\u003c\/strong\u003e Touch screen LED display\u003cbr\u003e\u003cstrong\u003eWater Quality Suitability:\u003c\/strong\u003e Suitable for harsh water conditions\u003cbr\u003e\u003cstrong\u003eGovernment Incentive Eligibility:\u003c\/strong\u003e STCs where requirements are met\u003cbr\u003e\u003cstrong\u003eCylinder Warranty:\u003c\/strong\u003e 10 years, subject to Rheem warranty terms\u003cbr\u003e\u003cstrong\u003eCylinder Labour Warranty:\u003c\/strong\u003e 3 years, subject to Rheem warranty terms\u003cbr\u003e\u003cstrong\u003eSealed System Warranty:\u003c\/strong\u003e 3 years supply and labour, subject to Rheem warranty terms\u003cbr\u003e\u003cstrong\u003eParts Warranty:\u003c\/strong\u003e 1 year supply and labour, subject to Rheem warranty terms\u003c\/p\u003e\n\u003ch2\u003e2.4kW Hardwired Backup Element\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eRheem AmbiPower 280e hardwired model\u003c\/strong\u003e includes a \u003cstrong\u003e2.4kW backup element\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThis gives the system stronger boost and emergency heating support than the 10 amp plug-in version, which uses a smaller 1.5kW backup element. The backup element is useful when higher hot water demand occurs, when recovery support is needed, or when operating conditions are less favourable for heat pump-only heating.\u003c\/p\u003e\n\u003cp\u003eA licensed electrician may be required to confirm or complete the correct hardwired electrical connection.\u003c\/p\u003e\n\u003ch2\u003eHardwired Model vs Plug-In Model\u003c\/h2\u003e\n\u003cp\u003eThe Rheem AmbiPower 280e range includes both hardwired and plug-in options.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003ehardwired model\u003c\/strong\u003e uses a \u003cstrong\u003e2.4kW backup element\u003c\/strong\u003e and requires a suitable hardwired electrical connection. The \u003cstrong\u003eplug-in model\u003c\/strong\u003e uses a 10 amp plug and lead connection with a \u003cstrong\u003e1.5kW backup element\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe right option depends on the property, existing electrical setup, available circuit, installation location, recovery needs and whether the customer wants a hardwired or plug-in setup.\u003c\/p\u003e\n\u003cp\u003eFor customers specifically wanting the stronger backup element version, the \u003cstrong\u003e2.4kW hardwired model\u003c\/strong\u003e is the correct product pathway.\u003c\/p\u003e\n\u003ch2\u003eLower Energy Hot Water\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eRheem AmbiPower 280e\u003c\/strong\u003e is designed to reduce water heating energy use compared with a standard electric water heater.\u003c\/p\u003e\n\u003cp\u003eHeat pump technology works by absorbing heat from the surrounding air and transferring that heat into the stored water. This allows the system to produce hot water efficiently without relying only on direct electric element heating.\u003c\/p\u003e\n\u003cp\u003eRheem lists potential water heating energy savings of up to \u003cstrong\u003e73.9% in Zone 3\u003c\/strong\u003e when replacing an electric water heater under stated conditions. Actual savings can vary depending on location, the system being replaced, hot water consumption, tariff setup, household usage, solar PV use and installation conditions.\u003c\/p\u003e\n\u003ch2\u003eR290 Natural Refrigerant\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eRheem AmbiPower 280e\u003c\/strong\u003e uses \u003cstrong\u003eR290 natural refrigerant\u003c\/strong\u003e, which has very low global warming potential compared with many older refrigerant types.\u003c\/p\u003e\n\u003cp\u003eRheem lists the refrigerant with a GWP of under 3, making the AmbiPower 280e a strong choice for customers wanting efficient hot water technology with lower-impact refrigerant design.\u003c\/p\u003e\n\u003ch2\u003eAdvanced Wraparound Microchannel Heating\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eAmbiPower 280e\u003c\/strong\u003e uses advanced wraparound microchannel heating technology designed to support uniform and faster water heating.\u003c\/p\u003e\n\u003cp\u003eThis design helps transfer heat efficiently into the stored water and supports recovery performance for family households with regular daily hot water demand.\u003c\/p\u003e\n\u003ch2\u003eBuilt for Australian Conditions\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eRheem AmbiPower 280e\u003c\/strong\u003e has been designed and tested for harsh Australian conditions.\u003c\/p\u003e\n\u003cp\u003eThe system includes an enamel lined water tank to help reduce corrosion risk, a side fan design for airflow and rain protection, a painted sheet metal outer shell and an aluminium top cover to help withstand outdoor exposure.\u003c\/p\u003e\n\u003cp\u003eThis makes it a practical heat pump option for homes where the unit will be installed outdoors in a suitable location with correct clearances, drainage and access.\u003c\/p\u003e\n\u003ch2\u003eTouch Screen LED Display\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eRheem AmbiPower 280e\u003c\/strong\u003e includes a user-friendly touch screen LED display.\u003c\/p\u003e\n\u003cp\u003eThe display provides system visibility, performance information and easier operation for the homeowner compared with older-style electric storage systems.\u003c\/p\u003e\n\u003ch2\u003eSuitable for Cold and Harsh Conditions\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eRheem AmbiPower 280e\u003c\/strong\u003e is designed to operate across a broad climate range and is listed as suitable for cold climates from \u003cstrong\u003e-6°C to +43°C\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt is also listed as suitable for harsh water conditions, making it a practical heat pump option for a wider range of Australian homes where installation conditions and water quality need to be considered.\u003c\/p\u003e\n\u003ch2\u003eGovernment Incentives and STCs\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eRheem AmbiPower 280e\u003c\/strong\u003e may be eligible for government incentives where requirements are met.\u003c\/p\u003e\n\u003cp\u003eEligible heat pump hot water systems may qualify for Small-scale Technology Certificates and may also be eligible for additional state-based incentives in some areas, depending on product model, installation location, installer requirements, installation year and program rules.\u003c\/p\u003e\n\u003cp\u003eAny rebate, STC discount or incentive should be confirmed before ordering or installation.\u003c\/p\u003e\n\u003ch2\u003eCommon Uses\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eRheem AmbiPower 280e 2.4kW Hardwired Heat Pump\u003c\/strong\u003e can be suitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eElectric hot water system replacement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHeat pump hot water upgrades\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFamily homes\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLarger townhouses\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRental properties\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInvestment properties\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHomes with up to 6 people under Rheem’s stated assumptions\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHomes wanting lower energy use than standard electric storage\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHomes wanting stronger backup element support than a plug-in heat pump\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHomes where traditional roof-mounted solar hot water may not be suitable\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eProperties needing a 280L heat pump hot water system\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSupply-only orders where a licensed installer is already arranged\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSupply and install orders in selected Brisbane and Gold Coast areas\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSuitability depends on household size, hot water usage, tariff setup, installation location, airflow, drainage, plumbing condition, electrical supply and compliance requirements.\u003c\/p\u003e\n\u003ch2\u003eWhy Order From Installed Today?\u003c\/h2\u003e\n\u003cp\u003eInstalled Today gives customers a simple way to order the \u003cstrong\u003eRheem AmbiPower 280e 2.4kW Hardwired Heat Pump Hot Water System\u003c\/strong\u003e as either a product-only purchase or a supply and install package in selected Brisbane and Gold Coast service areas.\u003c\/p\u003e\n\u003cp\u003eYou can compare the unit-only price, check the installed-from price, complete the installation compatibility check and select matching installation add-ons before checkout.\u003c\/p\u003e\n\u003ch3\u003eWhy customers choose Installed Today:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eSupply only or supply and install options\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInstalled-from pricing shown separately\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCompatibility check before checkout\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eValve kits and installation add-ons available online\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBrisbane and Gold Coast service area support\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSuitable for heat pump hot water replacement orders\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClear product and installation pathway before checkout\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePractical 280L heat pump replacement option\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eProduct-only ordering for customers with their own licensed installer\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSupply and install pathway for selected heat pump upgrades\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e2.4kW hardwired model with stronger backup element support\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRheem heat pump hot water system from a recognised Australian hot water brand\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eCan I buy the Rheem AmbiPower 280e hardwired model supply only?\u003c\/h3\u003e\n\u003cp\u003eYes. You can buy the Rheem AmbiPower 280e 2.4kW hardwired model as a supply-only product if you already have a licensed installer arranged. The unit-only price does not include installation, old system removal, disposal, valve kits, electrical work, plumbing alterations, drainage changes or compliance upgrades unless selected separately.\u003c\/p\u003e\n\u003ch3\u003eCan I get the Rheem AmbiPower 280e hardwired model installed in Brisbane?\u003c\/h3\u003e\n\u003cp\u003eYes. Supply and install options are available in selected Brisbane service areas. Complete the installation check to confirm whether the standard heat pump installation option suits your property and whether additional add-ons may be required.\u003c\/p\u003e\n\u003ch3\u003eCan I get the Rheem AmbiPower 280e hardwired model installed in Gold Coast?\u003c\/h3\u003e\n\u003cp\u003eYes. Selected Gold Coast service areas are available. Installation suitability depends on access, existing plumbing, electrical requirements, drainage, valve condition, airflow, clearances, electrical connection suitability, compliance and selected add-ons.\u003c\/p\u003e\n\u003ch3\u003eIs installation included in the product price?\u003c\/h3\u003e\n\u003cp\u003eNo. The main product price is the unit-only price. The installed-from price is shown separately so you can compare supply only against supply and install.\u003c\/p\u003e\n\u003ch3\u003eWhat does the installed-from price include?\u003c\/h3\u003e\n\u003cp\u003eThe installed-from price is based on the Rheem AmbiPower 280e unit plus the matching standard installation option. Final pricing may vary depending on valve kits, removal or disposal selections, pipework, drainage, electrical work, access, compliance and other selected add-ons.\u003c\/p\u003e\n\u003ch3\u003eDo I need a valve kit?\u003c\/h3\u003e\n\u003cp\u003eMany hot water replacements require compatible valves to meet installation and compliance requirements. The installation check helps identify whether a valve kit is recommended for your order.\u003c\/p\u003e\n\u003ch3\u003eWhat is the model family for the Rheem AmbiPower 280e?\u003c\/h3\u003e\n\u003cp\u003eThe Rheem AmbiPower 280e model family is \u003cstrong\u003e551E280\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eWhat is the tank capacity?\u003c\/h3\u003e\n\u003cp\u003eThe Rheem AmbiPower 280e has a \u003cstrong\u003e280L capacity\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eHow many people is the Rheem AmbiPower 280e suitable for?\u003c\/h3\u003e\n\u003cp\u003eRheem lists the AmbiPower 280e as suitable for up to \u003cstrong\u003e6 people\u003c\/strong\u003e under its stated usage assumptions. Actual suitability depends on shower length, hot water usage, tariff setup, climate and household habits.\u003c\/p\u003e\n\u003ch3\u003eIs this the 2.4kW hardwired model?\u003c\/h3\u003e\n\u003cp\u003eYes. This page is written for the \u003cstrong\u003e2.4kW hardwired model\u003c\/strong\u003e of the Rheem AmbiPower 280e.\u003c\/p\u003e\n\u003ch3\u003eWhat backup element does the hardwired model use?\u003c\/h3\u003e\n\u003cp\u003eThe Rheem AmbiPower 280e hardwired model uses a \u003cstrong\u003e2.4kW backup element\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between the hardwired and plug-in model?\u003c\/h3\u003e\n\u003cp\u003eThe hardwired model uses a hardwired electrical connection with a \u003cstrong\u003e2.4kW backup element\u003c\/strong\u003e. The plug-in model uses a 10 amp plug and lead connection with a \u003cstrong\u003e1.5kW backup element\u003c\/strong\u003e. The right model depends on the property, electrical setup and installation requirements.\u003c\/p\u003e\n\u003ch3\u003eWhat refrigerant does the Rheem AmbiPower 280e use?\u003c\/h3\u003e\n\u003cp\u003eThe Rheem AmbiPower 280e uses \u003cstrong\u003eR290 natural refrigerant\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eWhat is the GWP of the refrigerant?\u003c\/h3\u003e\n\u003cp\u003eRheem lists the R290 refrigerant used in the AmbiPower 280e with a \u003cstrong\u003eGWP of under 3\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eWhat is the COP of the Rheem AmbiPower 280e?\u003c\/h3\u003e\n\u003cp\u003eThe Rheem AmbiPower 280e is listed with a \u003cstrong\u003eCOP of 5.2\u003c\/strong\u003e under stated test conditions.\u003c\/p\u003e\n\u003ch3\u003eDoes the Rheem AmbiPower 280e need direct sunlight?\u003c\/h3\u003e\n\u003cp\u003eNo. The AmbiPower 280e uses heat from the surrounding air and does not rely on direct sunlight to heat water.\u003c\/p\u003e\n\u003ch3\u003eIs the Rheem AmbiPower 280e suitable for cold climates?\u003c\/h3\u003e\n\u003cp\u003eYes. Rheem lists the AmbiPower 280e as suitable for cold climates with an operating range from \u003cstrong\u003e-6°C to +43°C\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eIs the Rheem AmbiPower 280e suitable for harsh water conditions?\u003c\/h3\u003e\n\u003cp\u003eYes. Rheem lists the AmbiPower 280e as suitable for harsh water conditions.\u003c\/p\u003e\n\u003ch3\u003eCan the Rheem AmbiPower 280e reduce running costs?\u003c\/h3\u003e\n\u003cp\u003eYes. Rheem lists potential water heating energy savings of up to \u003cstrong\u003e73.9% in Zone 3\u003c\/strong\u003e compared with an electric water heater under stated conditions. Actual savings depend on location, household usage, tariff setup, installation conditions and the system being replaced.\u003c\/p\u003e\n\u003ch3\u003eIs the Rheem AmbiPower 280e eligible for rebates?\u003c\/h3\u003e\n\u003cp\u003eThe Rheem AmbiPower 280e may be eligible for STCs and may be eligible for additional incentives in some states where requirements are met. Eligibility and value can vary depending on location, installation year, product model, installer requirements and program rules.\u003c\/p\u003e\n\u003ch3\u003eWhat is the warranty on the Rheem AmbiPower 280e?\u003c\/h3\u003e\n\u003cp\u003eRheem lists the AmbiPower 280e with a \u003cstrong\u003e10-year cylinder supply warranty\u003c\/strong\u003e, \u003cstrong\u003e3-year cylinder labour warranty\u003c\/strong\u003e, \u003cstrong\u003e3-year sealed system supply and labour warranty\u003c\/strong\u003e, and \u003cstrong\u003e1-year parts supply and labour warranty\u003c\/strong\u003e, subject to Rheem warranty terms and conditions.\u003c\/p\u003e\n\u003ch3\u003eIs the Rheem AmbiPower 280e hardwired model good for replacing an electric hot water system?\u003c\/h3\u003e\n\u003cp\u003eYes. The Rheem AmbiPower 280e hardwired model can be a strong heat pump replacement option for selected electric hot water systems, provided the property has suitable space, airflow, drainage, electrical supply and plumbing conditions.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between the Rheem AmbiPower 180 and 280e?\u003c\/h3\u003e\n\u003cp\u003eThe AmbiPower 180 is the smaller model and is better suited to smaller households. The AmbiPower 280e has larger 280L capacity and is better suited to family homes or households with higher daily hot water demand.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Installed Today","offers":[{"title":"Default Title","offer_id":51544017830104,"sku":null,"price":3229.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/9631\/3304\/files\/rheem-ambipower-mdc-280l-heat-pump-hot-water-system-282377.webp?v=1739785475","url":"https:\/\/installedtoday.com.au\/products\/rheem-ambipower-280l-heat-pump-hot-water-system-2-4kw-hardwired","provider":"Installed Today","version":"1.0","type":"link"}