Enviroheat 250L Heat Pump Hot Water System

The Enviroheat 250L Heat Pump Hot Water System is available from Installed Today as a supply-only heat pump water heater or as a complete supply and install package in selected Brisbane and Gold Coast service areas.

Choose the unit only if you already have a licensed plumber or installer arranged, or check your supply and install package to confirm standard installation, valve kit requirements, electrical suitability, location suitability, drainage, site access and available installation timeframes before checkout.

The Enviroheat 250L is an energy-efficient heat pump hot water system designed for households wanting to replace a traditional electric storage water heater with a lower-running-cost alternative. With a 250L nominal tank volume, R134a refrigerant, auxiliary electric heating support, smart timer control, dual anode corrosion protection and quiet operation, it is a practical option for family homes wanting more stored capacity than the 200L Enviroheat model.

About the Enviroheat 250L Heat Pump

The Enviroheat 250L Heat Pump uses air-source heat pump technology to draw heat from the surrounding air and transfer that heat into the stored water. This helps reduce reliance on direct electric element heating and can reduce water heating energy use compared with a conventional electric storage water heater.

This model is commonly referred to as a 250L heat pump, with the official model 250EH1-15 listing a 250L nominal tank volume. It is designed as a monobloc air-source heat pump water heater and includes an auxiliary electric heating element for boost support when required.

The system is designed to operate in ambient temperatures down to -7°C, with auxiliary electric heating support available when operating conditions require additional heating assistance. It also includes smart operating modes such as Eco, Auto, Boost, Holiday and automatic anti-legionella sanitisation control.

Buy Enviroheat 250L Supply Only

Order the Enviroheat 250L Heat Pump Hot Water System online as a supply-only product. This option is ideal if you already have a licensed plumber, electrician or installer arranged and only need the unit supplied.

The supply-only product price is for the hot water system itself. Installation, old system removal, disposal, valve kits, electrical work, plumbing alterations, drainage changes, compliance upgrades and additional site requirements are not included unless selected separately as add-ons.

Supply-only is best for customers searching for:

• Enviroheat 250L price

• Enviroheat 250L heat pump for sale

• Enviroheat 250EH1-15 heat pump

• Enviroheat 250L supply only

• 250L heat pump hot water system supply only

• Enviroheat heat pump water heater

• Energy efficient hot water system

• Solar-ready heat pump hot water system

Enviroheat 250L Supplied and Installed in Brisbane & Gold Coast

Installed Today can supply and install the Enviroheat 250L Heat Pump Hot Water System in selected Brisbane and Gold Coast service areas.

This option is designed for customers who want the heat pump supplied and professionally installed through one streamlined online order. The supply and install pathway helps confirm whether this system suits your property, whether a valve kit is required, whether the installation location is suitable, whether drainage is available, and whether any additional installation add-ons may be needed before checkout.

The installed-from price is based on the product plus the matching standard installation option. Final pricing may vary depending on site access, electrical suitability, drainage, valve requirements, old system removal or disposal selections, pipework changes, base requirements, compliance requirements and selected add-ons.

Enviroheat 250L Installation in Brisbane

For Brisbane customers, the Enviroheat 250L Heat Pump can be ordered with supply and install options through Installed Today. This is suitable for homes replacing an existing electric hot water system where the current location, access, plumbing, drainage and electrical supply are suitable for the selected installation option.

The 250L size can be a strong fit for Brisbane family homes, townhouses, rental properties and customers wanting to upgrade from standard electric storage to a heat pump hot water system with solar-ready timer control.

Customers in selected Brisbane suburbs can complete the installation check before checkout to confirm whether standard heat pump installation, valve kit selection, electrical work, drainage, extra plumbing add-ons, old system removal or disposal options may be required.

This makes the page suitable for customers searching for Enviroheat 250L installation Brisbane, Enviroheat heat pump supplied and installed Brisbane, and 250L heat pump hot water replacement Brisbane.

Enviroheat 250L Installation in Gold Coast

Gold Coast customers can also order the Enviroheat 250L Heat Pump Hot Water System with supply and install options in selected service areas.

This pathway is useful for homeowners, landlords, property managers and renovators who want the product and installation organised together instead of buying the heat pump separately and arranging trades afterwards.

Complete the supply and install check to confirm whether the existing setup is suitable and whether additional items such as valve kits, electrical work, drainage changes, pipework, base support, access requirements or old system disposal may be required.

This helps customers searching for Enviroheat 250L installed Gold Coast, Enviroheat heat pump installation Gold Coast, and 250L heat pump supply and install Gold Coast.

Is the Enviroheat 250L Right for Your Home?

The Enviroheat 250L Heat Pump may be suitable if you are replacing a standard electric storage hot water system and want a heat pump option with larger stored capacity, smart timer control, boost support and lower energy use than conventional electric storage.

It is commonly suited to medium family homes, townhouses, rental properties and customers wanting a practical heat pump upgrade with more capacity than a compact 200L-class unit.

Real-world suitability depends on household size, shower length, water usage, tariff setup, climate, installation location, airflow, drainage, electrical supply and household hot water habits.

This system may suit you if:

• You are replacing an existing electric hot water system

• You want a 250L heat pump hot water system

• You want more stored capacity than a 200L-class heat pump

• You want smart timer control to help use daytime solar PV where suitable

• Your household has moderate to higher hot water demand

• Your property has suitable airflow, drainage and installation space

• Your electrical setup is suitable for the selected model

• You want the choice of supply only or supply and install

Extra work may be required if:

• The system is being moved to a new location

• Existing valves are old, missing or non-compliant

• Extra pipework or drainage changes are needed

• Electrical upgrades or power point changes are required

• Access is restricted

• A compliant base, tray, drainage or insulation is required

• The old system needs additional removal or disposal work

• The installation location has poor airflow or unsuitable clearances

• The existing setup does not suit a heat pump installation

Key Features of the Enviroheat 250L

• 250L heat pump hot water system

• Official model 250EH1-15

• 250L nominal tank volume

• Monobloc air-source heat pump design

• R134a refrigerant

• 1.5kW auxiliary electric heating element

• Average heat pump input power of 495W

• Maximum heat pump input power of 865W

• Maximum input power/current of 2365W / 9.85A

• Smart control system

• Eco mode for timer-based operation

• Auto mode for demand-based operation

• Boost mode for faster hot water recovery

• Holiday mode for periods away from home

• Automatic anti-legionella sanitisation cycle

• Dual full-length anode corrosion protection

• Sacrificial anode protection

• Vitreous enamel coated steel tank

• IPX4 insulation protection rating

• 46 dBA listed noise level

• Temperature setting range from 35°C to 75°C

• Default temperature setting of 55°C

• Minimum ambient operating temperature of -7°C

• G3/4" female plumbing connections

• Designed to work well with solar PV timer scheduling

• STC eligible where requirements are met

• 5-year warranty under Enviroheat warranty terms

Quick Specs

Brand: Enviroheat
Product: Enviroheat 250L Heat Pump Hot Water System
Model: 250EH1-15
System Type: Monobloc air-source heat pump water heater
Nominal Tank Volume: 250L
Power Supply: 220V–240V / 50Hz / single phase
Tank Material: Vitreous enamel coated steel
Insulation Protection Rating: IPX4
Relief Valve Pressure: 700 kPa
Plumbing Connection Size: G3/4" female
Corrosion Protection: Sacrificial anode
Average Heat Pump Input Power: 495W
Maximum Heat Pump Input Power: 865W
Auxiliary Heating Input Power: 1500W
Maximum Input Power / Current: 2365W / 9.85A
Refrigerant: R134a
Refrigerant Charge: 0.9kg
Default Temperature Setting: 55°C
Temperature Setting Range: 35°C–75°C
Minimum Ambient Temperature: -7°C
Noise Level: 46 dBA
Product Dimensions: 600mm x 629mm x 1965mm
Packing Dimensions: 735mm x 695mm x 2250mm
Net / Gross Weight: 102kg / 115kg
Warranty: 5 years, subject to Enviroheat warranty terms

Solar-Ready Timer Control

The Enviroheat 250L includes timer control that can be programmed to run during selected periods of the day.

This can be useful for homes with solar PV, where the system may be scheduled to operate during daylight hours when solar generation is available. The insulated tank then stores heated water for use later in the evening or morning, depending on household demand and system settings.

A second timer can also be used for early morning boost-style operation where extra hot water support is required.

Smart Operating Modes

The Enviroheat 250L Heat Pump includes multiple operating modes to help match hot water heating to household routines.

Operating modes may include:

• Auto mode for demand-based hot water delivery

• Eco mode for timer-based operation and solar PV scheduling

• Boost mode for faster recovery using auxiliary heating support

• Holiday mode for periods when hot water is not required

• Anti-legionella sanitisation cycle for stored water hygiene

• Screen lock and diagnostic functions through the display

These control options help make the Enviroheat 250L a practical heat pump option for customers wanting a simple set-and-forget system with extra control when needed.

Dual Anode Protection

The Enviroheat heat pump range includes dual full-length anodes to help reduce corrosion risk and support tank life.

This can be useful in areas with harder or poorer water quality, where anode condition and routine servicing can play an important role in long-term hot water system performance.

Correct maintenance, water quality, installation compliance and warranty conditions still apply.

Heat Pump Efficiency

The Enviroheat 250L uses heat pump technology to absorb heat from the surrounding air and transfer that energy into the stored water.

This allows the system to generate more heat output than the electrical energy consumed under suitable conditions. Actual energy savings can vary depending on the water heater being replaced, installation location, climate, tariff setup, timer settings, household usage and whether solar PV is used to power the system during the day.

Enviroheat positions the system as an energy-efficient alternative to conventional water heaters, with potential savings depending on the installation and household usage.

Common Uses

The Enviroheat 250L can be suitable for:

• Electric hot water system replacement

• Heat pump hot water upgrades

• Medium family homes

• Townhouses

• Rental properties

• Homes needing more capacity than a 200L-class heat pump

• Homes with solar PV where daytime operation can be scheduled

• Customers wanting lower energy use than standard electric storage

• Customers wanting a solar-ready heat pump hot water system

• Supply-only orders where a licensed installer is already arranged

• Supply and install orders in selected Brisbane and Gold Coast areas

Suitability depends on household size, hot water usage, tariff setup, installation location, airflow, drainage, plumbing condition, electrical supply and compliance requirements.

Why Order From Installed Today?

Installed Today gives customers a simple way to order the Enviroheat 250L Heat Pump Hot Water System as either a product-only purchase or a supply and install package in selected Brisbane and Gold Coast service areas.

You can compare the unit-only price, check the installed-from price, complete the installation compatibility check and select matching installation add-ons before checkout.

Why customers choose Installed Today:

• Supply only or supply and install options

• Installed-from pricing shown separately

• Compatibility check before checkout

• Valve kits and installation add-ons available online

• Brisbane and Gold Coast service area support

• Suitable for heat pump hot water replacement orders

• Clear product and installation pathway before checkout

• Practical 250L heat pump replacement option

• Product-only ordering for customers with their own licensed installer

• Supply and install pathway for selected heat pump upgrades

• Solar-ready timer operation for selected homes with PV systems

Frequently Asked Questions

Can I buy the Enviroheat 250L supply only?

Yes. You can buy the Enviroheat 250L as a supply-only product if you already have a licensed installer arranged. The unit-only price does not include installation, old system removal, disposal, valve kits, electrical work, plumbing alterations, drainage changes or compliance upgrades unless selected separately.

Can I get the Enviroheat 250L installed in Brisbane?

Yes. Supply and install options are available in selected Brisbane service areas. Complete the installation check to confirm whether the standard heat pump installation option suits your property and whether additional add-ons may be required.

Can I get the Enviroheat 250L installed in Gold Coast?

Yes. Selected Gold Coast service areas are available. Installation suitability depends on access, existing plumbing, electrical requirements, drainage, valve condition, airflow, clearances, compliance and selected add-ons.

Is installation included in the product price?

No. The main product price is the unit-only price. The installed-from price is shown separately so you can compare supply only against supply and install.

What does the installed-from price include?

The installed-from price is based on the Enviroheat 250L unit plus the matching standard installation option. Final pricing may vary depending on valve kits, removal or disposal selections, pipework, electrical work, drainage, access, compliance and other selected add-ons.

Do I need a valve kit?

Many hot water replacements require compatible valves to meet installation and compliance requirements. The installation check helps identify whether a valve kit is recommended for your order.

What is the model number for the Enviroheat 250L?

The Enviroheat 250L heat pump model is 250EH1-15.

Is the Enviroheat 250L exactly 250 litres?

Yes. The Enviroheat 250EH1-15 is listed with a 250L nominal tank volume.

What refrigerant does the Enviroheat 250L use?

The Enviroheat 250L uses R134a refrigerant.

What is the noise level of the Enviroheat 250L?

The Enviroheat 250L is listed with a 46 dBA noise level.

What is the temperature setting range?

The Enviroheat 250L has a temperature setting range from 35°C to 75°C, with a default temperature setting of 55°C.

Can the Enviroheat 250L work with solar PV?

Yes. The Enviroheat 250L includes timer settings that can be used to schedule operation during daylight hours, helping homes with solar PV make better use of daytime solar generation where suitable.

Does the Enviroheat 250L have boost mode?

Yes. The system includes Boost mode, which activates auxiliary heating support for faster hot water recovery when required.

Does the Enviroheat 250L have holiday mode?

Yes. Holiday mode allows the system to be set for periods when hot water is not required, then return to operation before the home is occupied again.

Does the Enviroheat 250L have anti-legionella control?

Yes. The system includes an automatic anti-legionella sanitisation function designed to periodically raise stored water temperature for hygiene control.

Is the Enviroheat 250L suitable for replacing an electric hot water system?

Yes. The Enviroheat 250L can be a practical heat pump replacement option for selected electric hot water systems, provided the property has suitable space, airflow, drainage, electrical supply and plumbing conditions.

Is the Enviroheat 250L eligible for STCs or rebates?

The Enviroheat 250L may be eligible for STCs and other incentives where requirements are met. Eligibility and value can vary depending on location, installation year, product model, installer requirements and program rules.

What warranty does the Enviroheat 250L have?

Enviroheat lists a 5-year warranty, subject to warranty policy terms, installation requirements and product conditions.

* Requested element size may come delivered separately to system for electric systems - All units supplied with factory with 3.6kW

**Where a unit supplied is capable of supplying more than 50°C, a tempering valve must be installed on the property or purchased as part of a valve kit with your order.

Hassle-Free Installation – Done Right by Trusted Experts

Need professional installation? We’ve got you covered! Our optional installation service connects you with our network of certified, trusted contractors, ensuring a smooth and stress-free setup.

How It Works:

🔹 Step 1: Select Installation Service
Choose to include professional installation when purchasing your new system.

🔹 Step 2: Pay for Installation Upfront
Simply add the installation service prior to adding your product to cart —no hidden fees, no surprises.

🔹 Step 3: We Assign a Certified Contractor
We’ll match you with a licensed, experienced contractor from our network to handle the installation.

🔹 Step 4: Schedule Your Installation
The assigned contractor will contact you directly to arrange a convenient time for installation.

🔹 Step 5: Direct Support When You Need It
For any installation-related questions, your contractor is your first point of contact. If any issues arise, our team is here to help.

🚨 Please Note: Installed Today supplies the product and connects you with a certified contractor for installation.

We’re committed to delivering top-quality products and facilitating a seamless installation experience. Have product questions? Reach out to us anytime! 🔥

Buying a new hot water system, water filter, pump or plumbing product should be simple. Installed Today helps you compare the product, the supply-only price and the available installation options in one place, so you can choose what suits your home, budget and timing without the back and forth.

Whether you already know exactly what you need or you are still comparing options, we make it easier to order with confidence.

Why Customers Choose Installed Today

Supply Only or Installed Options

Choose the product on its own, or add installation where available. This gives you the flexibility to buy the way that suits you best.

Clear Pricing Before Checkout

See your product price upfront, then add the installation options or common extras you need before placing your order. No confusing quote forms just to understand your starting price.

Product Details That Actually Help

Key specs, sizing details, warranty information, product features and suitability notes are shown clearly, so you can compare products properly before you buy.

Installation Add-Ons Available

Where relevant, you can add common installation extras such as valve kits, bases, electrical options, removal, access-related items or other site-specific upgrades before checkout.

Built Around Brisbane and Gold Coast Homes

Our product and installation options are selected with common local homes, water quality, plumbing layouts, access issues and replacement requirements in mind.

One Simple Order

Add the product and selected extras to cart in one order, instead of trying to organise separate suppliers, installers and parts.

Practical Help Before You Buy

Not sure which product, size or installation option is right? Installed Today gives you a clearer path to choosing the right system before you order.

Designed To Make Your Decision Easier

Installed Today is built for customers who want a faster, clearer and more convenient way to buy.

Instead of guessing what is included, waiting for basic pricing or trying to work out which extras are needed, you can review the product, compare your options and move forward with confidence.

Choose supply only if you just need the product.

Choose supplied and installed if you want the product installed where available.

Add common extras before checkout if your job needs additional parts or site-specific options.

It is a simpler way to organise the product and the parts of the job that matter most.

Important Note

Installation availability, inclusions and add-ons vary by product type, site access, existing services, selected options and your property requirements. Some installations may require additional work, upgrades or checks before the job can proceed.

Fast & Reliable Delivery – What to Expect

Same Day Delivery: Available in Brisbane and Gold Coast on select units ordered before 8:00am
Express Delivery: 1–4 business days
Standard Delivery: 2–8 business days

Same Day Delivery

Same day delivery is available for selected hot water systems in Brisbane and Gold Coast metro areas when ordered before 8:00am, subject to stock availability, delivery capacity and suitable transport conditions.

Fast Metro Delivery

Most hot water orders in metro areas are delivered quickly, with around 90% arriving within 1 business day.

Weather Delays

Hot water systems cannot always be transported safely by courier during rain. Delivery timeframes may be affected when wet weather impacts safe handling, loading, unloading or transport conditions.

Express Delivery Guarantee

If your express delivery order takes longer than 1–4 business days, we will adjust the delivery timeframe to our standard 2–8 business days and refund your express shipping charge automatically.

Order Tracking

We will send your delivery details as soon as your order has been dispatched.

Need help with your delivery? Contact our team and we’ll be happy to assist.