PURETEC HYBRID FACTORY MAINTENANCE KIT
Puretec HR-G6R1 Factory Service Kit – Suits Hybrid G6 & R1
The Puretec HR-G6R1 is the genuine manufacturer-listed maintenance kit for compatible Puretec Hybrid G6 and Hybrid R1 whole-house filtration and ultraviolet systems.
The factory kit combines the two replacement filter cartridges with the principal UV service components required for scheduled maintenance: PL05MP1, DP10MP1, RL6 UV lamp, RQS6 quartz sleeve, food-grade lubricant and two O-rings.
Both the Hybrid G6 and R1 use the same filtration and UV replacement components, making the HR-G6R1 the correct Puretec maintenance kit for either system.
Quick answer:
the Puretec HR-G6R1 suits Hybrid G6 and Hybrid R1 systems. It contains PL05MP1 + DP10MP1, an RL6 46W UV lamp, an RQS6 quartz sleeve, food-grade lubricant and two O-rings. Puretec's Hybrid maintenance guide specifies cartridge replacement every 6 months, UV lamp replacement annually and regular quartz-sleeve inspection.
KIT AT A GLANCE
Puretec HR-G6R1 Key Details
2 Cartridges
PL05MP1 + DP10MP1
```
RL6
46W UV Lamp
RQS6
Quartz Sleeve
2 O-Rings
Plus Food-Grade Lubricant
```
WHAT'S INCLUDED
Factory Service Kit Contents
PL05MP1
5 micron, 4.5" × 10" washable pleated polyester sediment cartridge.
```
DP10MP1
10 micron, 4.5" × 10" dual-purpose carbon-impregnated cartridge for sediment, chlorine taste, unwanted taste and odour reduction.
RL6 UV Lamp
46W high-output ultraviolet replacement lamp specified for compatible Hybrid G, R and P Series systems.
RQS6 Quartz Sleeve
Replacement quartz sleeve used around the RL6 lamp inside the applicable Hybrid UV chamber.
Food-Grade Lubricant
Included for applicable sealing surfaces and O-ring maintenance during servicing.
2 O-Rings
Two replacement O-rings are included as part of the manufacturer-listed maintenance kit.
```
DUAL FILTRATION + UV
Designed for the Hybrid G6 & R1 Treatment Sequence
Compatible Hybrid G6 and R1 systems use two cartridge stages before ultraviolet treatment.
Stage 1 uses the PL05MP1 for washable 5 micron sediment filtration. Stage 2 uses the DP10MP1 for additional particulate filtration together with chlorine, unwanted taste and odour reduction.
Water then passes through the UV chamber, where the RL6 ultraviolet lamp operates inside the RQS6 quartz sleeve.
STAGE 1
PL05MP1 5 Micron Washable Sediment Cartridge
The PL05MP1 is installed as the first filtration stage nearest the incoming water supply.
Puretec manufactures the PL Series from reusable non-woven polyester media pleated around a polypropylene support core, creating a large filtration surface area for suspended sediment.
5 Micron
Provides nominal 5 micron sediment filtration before the second treatment stage.
```
4.5" × 10"
Uses Puretec's 10-inch MaxiPlus large-format cartridge size.
Washable
Puretec specifies the pleated polyester media as washable and reusable where appropriate.
Dirt & Rust
Designed to reduce common suspended dirt and particulate rust.
Sand & Silt
The pleated media also captures suspended sand, silt and similar particulate material.
Pre-Filtration
Reduces sediment loading before water reaches the dual-purpose carbon cartridge and UV chamber.
```
STAGE 2
DP10MP1 Dual-Purpose Carbon Cartridge
The DP10MP1 is the second filtration cartridge specified for Hybrid G6 and R1 systems.
It is manufactured from carbon-impregnated non-cellulose pleated media rather than a conventional bonded carbon block.
This construction allows the cartridge to combine sediment filtration and carbon treatment in a single 10-inch MaxiPlus cartridge.
10 Micron
The DP10MP1 has a nominal particulate filtration rating of 10 micron.
```
4.5" × 10"
Uses the same MaxiPlus physical format as the PL05MP1.
Chlorine
Provides chlorine taste-and-odour reduction in applicable water supplies.
Unwanted Taste
The carbon treatment stage is designed to reduce unwanted taste.
Odour
Puretec specifies unwanted odour reduction as a function of the DP Series.
Sediment
The carbon-impregnated pleated media also contributes to particulate filtration.
```
UV LAMP
RL6 46W High-Output UV Lamp
The HR-G6R1 includes one genuine Puretec RL6 46W high-output UV lamp.
The RL6 is the manufacturer-specified replacement lamp for both the Hybrid G6 and Hybrid R1 and is used as the active ultraviolet component inside the UV chamber.
Puretec specifies annual UV lamp replacement.
The Hybrid controller incorporates a lamp-life timer, and the timer should be reset after a new lamp is installed according to the applicable maintenance procedure.
QUARTZ SLEEVE
RQS6 Replacement Quartz Sleeve
The RQS6 is a quartz sleeve, not a filter cartridge.
It surrounds the RL6 lamp inside the ultraviolet chamber, separating the lamp from the water while allowing UV light to pass through into the water stream.
Puretec recommends checking the quartz sleeve regularly, approximately every 3 months depending on source-water quality, for dirt or deposits that may interfere with UV transmission.
The sleeve should be cleaned where required and replaced if damaged or unable to be restored to a suitably clear condition.
COMPATIBILITY
Which Systems Does HR-G6R1 Suit?
Puretec Hybrid G6
Uses PL05MP1 as stage one, DP10MP1 as stage two, RL6 as the UV lamp and RQS6 as the quartz sleeve.
```
Puretec Hybrid R1
Uses the same filtration and UV replacement components in the indoor reversible-bracket configuration.
```
Confirm the exact Hybrid model before ordering.
Other Puretec Hybrid systems use different cartridge sizes and filtration combinations even where the UV lamp appears similar.
HYBRID G6
Service Components for the Puretec Hybrid G6
Puretec's current Hybrid G6 specification identifies the following replacement components:
- Stage 1 – PL05MP1
- Stage 2 – DP10MP1
- UV lamp – RL6
- Quartz sleeve – RQS6
- 1" BSP [25 mm] connection
- Weather-protected G Series configuration
The G6 is designed around filtration followed by ultraviolet treatment and is particularly associated with common rainwater applications.
HYBRID R1
Service Components for the Puretec Hybrid R1
The Hybrid R1 uses the same PL05MP1, DP10MP1, RL6 and RQS6 replacement combination.
The R Series is designed for protected indoor installation and uses a reversible mounting arrangement that allows water flow to be configured left-to-right or right-to-left according to the installation.
- Stage 1 – PL05MP1
- Stage 2 – DP10MP1
- UV lamp – RL6
- Quartz sleeve – RQS6
- 1" BSP [25 mm] connection
- Indoor weather-protected installation
G6 VS R1
Same Maintenance Kit, Different Installation Configuration
| Feature |
Hybrid G6 |
Hybrid R1 |
| Maintenance Kit |
HR-G6R1 |
HR-G6R1 |
| Stage 1 |
PL05MP1 |
PL05MP1 |
| Stage 2 |
DP10MP1 |
DP10MP1 |
| UV Lamp |
RL6 |
RL6 |
| Quartz Sleeve |
RQS6 |
RQS6 |
| Connection |
1" BSP [25 mm] |
1" BSP [25 mm] |
| Installation Style |
Weather-protected G Series cabinet |
Protected indoor R Series configuration |
SYSTEM PERFORMANCE
Hybrid G6 & R1 UV Flow Specifications
Puretec specifies system flow according to the UV dose delivered by the complete Hybrid unit.
| UV Dose |
Puretec Listed Flow |
| 40 mJ/cm² |
54 L/min |
| 30 mJ/cm² |
70 L/min |
| 16 mJ/cm² |
130 L/min |
Puretec identifies 30 mJ/cm² as the industry-standard UV dose reference for drinking-water applications. Actual suitability also depends on source-water clarity and installation conditions.
SYSTEM REQUIREMENTS
Hybrid G & R Operating Requirements
| Specification |
Puretec Hybrid G / R Series |
| Connection |
1" BSP [25 mm] |
| Supply Pressure |
300–875 kPa |
| Pressure Control |
Where line pressure exceeds 500 kPa, an approved pressure-limiting device is required under the applicable installation guidance |
| Water Temperature |
0–52°C, protect from freezing |
| Power Supply |
240V AC / 50Hz |
| Water Line |
Cold water only |
MAINTENANCE SCHEDULE
Different Components Have Different Service Intervals
The entire HR-G6R1 kit should not be described as having one generic 6–12 month replacement cycle.
PL05MP1 & DP10MP1
Puretec's Hybrid G/R maintenance guide specifies replacement of the filter cartridges every 6 months.
```
RL6 UV Lamp
The UV lamp is specified for replacement annually.
RQS6 Quartz Sleeve
Inspect approximately every 3 months depending on source-water quality and clean or replace as required.
```
WHY MAINTENANCE CAN VARY
Water Conditions Still Matter
Although Puretec specifies scheduled intervals, the condition of the filtration system should also be monitored between services.
Sediment Loading
High levels of dirt, rust, sand or silt can load the PL05MP1 more quickly.
```
Carbon Demand
Chlorine and unwanted taste-and-odour treatment demand affects the practical condition of the DP10MP1.
Quartz Fouling
Hardness, iron, manganese or other source-water conditions can contribute to deposits on the quartz sleeve.
Reduced Flow
A noticeable reduction in water flow can indicate that filtration cartridges have become loaded.
Source-Water Changes
Changes in rainwater-tank or other incoming water conditions can increase filtration demand.
UV Transmission
UV performance depends on suitably clear water reaching the ultraviolet treatment chamber.
```
CORRECT CARTRIDGE ORDER
PL05MP1 First, DP10MP1 Second
Puretec identifies the cartridge nearest the incoming water supply as Stage 1.
1. PL05MP1
Install the washable 5 micron pleated sediment cartridge nearest the water inlet.
```
2. DP10MP1
Install the dual-purpose carbon cartridge in the second housing before the UV chamber.
```
Do not reverse the filtration stages.
The two cartridges perform different functions and should be installed in the positions specified by Puretec.
SERVICE PROCESS
What Is Involved in a Hybrid G6 or R1 Service?
- Confirm the installed system is a Hybrid G6 or Hybrid R1
- Disconnect electrical power before UV servicing
- Turn off the incoming water supply
- Relieve water pressure from the filtration system
- Allow UV components to cool before handling
- Remove the existing PL05MP1 and DP10MP1 cartridges
- Clean the filter bowls as required
- Rinse the filter housings thoroughly
- Inspect O-rings and sealing surfaces
- Use food-grade lubricant where required
- Install PL05MP1 in stage one
- Install DP10MP1 in stage two
- Replace the RL6 UV lamp at its scheduled interval
- Inspect, clean or replace the RQS6 sleeve as required
- Reassemble the filtration and UV components correctly
- Restore the water supply gradually
- Check the complete system for leaks
- Restore electrical power and reset the lamp-life timer after lamp replacement
UV SERVICE CARE
Important Lamp & Quartz Sleeve Handling
Servicing the ultraviolet assembly requires additional care beyond a normal cartridge change.
Disconnect both electrical power and water before servicing the UV assembly.
Puretec also instructs users to release system pressure and allow hot UV components to cool before handling.
The lamp and quartz sleeve should be handled carefully. Marks, fingerprints and deposits on the glass surfaces can interfere with UV transmission.
The quartz sleeve is glass and can be damaged if knocked, overtightened or handled incorrectly during removal or reassembly.
WHAT IS NOT INCLUDED
Cleaning Products & Repairs May Be Separate
The HR-G6R1 includes PL05MP1, DP10MP1, RL6, RQS6, food-grade lubricant and two O-rings.
Separate maintenance products such as Puretec quartz-sleeve cleaner or filter-housing cleaner should not be treated as included unless specifically added to the order.
Existing system faults are separate from scheduled consumable maintenance.
Damaged filter housings, controllers, pumps, valves, electrical components, pipework or other worn parts may require additional components or labour.
BEFORE ORDERING
Check These Details First
- Your installed system is a Puretec Hybrid G6 or R1
- Stage one requires PL05MP1
- Stage two requires DP10MP1
- Your UV system uses an RL6 lamp
- Your UV chamber uses an RQS6 quartz sleeve
- You require the complete factory maintenance kit
- The filtration housings and UV chamber are accessible
- The system can be safely isolated from water and electrical power
DIY OR PROFESSIONAL SERVICE
Can the HR-G6R1 Be Installed Yourself?
Puretec publishes maintenance instructions for Hybrid G and R systems, but the HR-G6R1 service involves both pressurised filtration housings and electrically powered ultraviolet equipment.
The water and electrical supply must be safely isolated, cartridges must be installed in the correct order, filter housings must be correctly resealed and the UV lamp and quartz sleeve must be handled carefully.
Professional servicing may be appropriate where you are not experienced with Hybrid UV maintenance.
Existing leaks, damaged seals, electrical faults, seized housings, cracked quartz sleeves, pumps or associated plumbing issues can require additional work beyond fitting the factory kit.
ORDERING OPTIONS
Choose How You Want to Order
Supply Only
Order the genuine Puretec HR-G6R1 for delivery to supported Australian locations where you have confirmed the installed Hybrid model.
```
Full Factory Kit
Receive both filter cartridges, the RL6 lamp, RQS6 quartz sleeve, food-grade lubricant and two O-rings in one manufacturer-listed maintenance package.
Professional Service Option
Professional Hybrid filtration and UV servicing may be available in eligible Brisbane and Gold Coast service areas.
```
COMMON QUESTIONS
Questions About the Puretec HR-G6R1 Factory Service Kit
What Systems Does HR-G6R1 Suit?
Puretec specifies the kit for Hybrid G6 and Hybrid R1 systems.
What Filter Cartridges Are Included?
The kit contains one PL05MP1 and one DP10MP1.
What Order Do the Cartridges Go In?
PL05MP1 is stage one nearest the water inlet, followed by DP10MP1 as stage two.
What Size Are the Cartridges?
Both use Puretec's 4.5" × 10" MaxiPlus format.
Is the PL05MP1 Washable?
Yes. Puretec specifies the PL05MP1 as a washable pleated polyester sediment cartridge.
What Does the DP10MP1 Do?
It provides sediment filtration together with carbon treatment for chlorine taste, unwanted taste and odour reduction.
Is the DP10MP1 a Carbon Block?
No. It uses carbon-impregnated non-cellulose pleated media rather than a conventional bonded carbon block.
Is a UV Lamp Included?
Yes. The kit includes one genuine RL6 46W high-output UV lamp.
Is a Quartz Sleeve Included?
Yes. The kit includes one RQS6 replacement quartz sleeve.
Is the RQS6 a Filter Cartridge?
No. RQS6 is the quartz glass sleeve positioned around the UV lamp inside the ultraviolet chamber.
Are O-Rings Included?
Yes. Puretec lists two O-rings as part of the HR-G6R1 factory kit.
Is Food-Grade Lubricant Included?
Yes. Puretec lists food-grade lubricant as an included maintenance component.
How Often Should the Cartridges Be Replaced?
Puretec's Hybrid G/R maintenance guide specifies cartridge replacement every 6 months.
How Often Should the RL6 Lamp Be Replaced?
Puretec specifies replacement annually.
How Often Should the RQS6 Sleeve Be Inspected?
Puretec recommends checking it approximately every 3 months depending on source-water quality.
Can Installed Today Service the System?
Professional Hybrid filtration and UV maintenance may be available in eligible Brisbane and Gold Coast service areas where the system is accessible and in serviceable condition.
WHY INSTALLED TODAY
Order the Correct Puretec Hybrid Maintenance Kit
Supply First
Purchase the genuine Puretec HR-G6R1 without adding installation where you already have your own maintenance arrangement.
```
Clearly Defined Contents
The listing identifies both cartridges, RL6 UV lamp, RQS6 quartz sleeve, lubricant and O-rings rather than describing the kit as a generic maintenance set.
Installation Capability
If you prefer professional servicing, Installed Today may also be able to complete the filtration and UV maintenance in selected local service areas.
```
FINAL CHECK
Is the Puretec HR-G6R1 the Right Kit for Your Hybrid System?
The Puretec HR-G6R1 Factory Service Kit is the manufacturer-listed maintenance kit for Puretec Hybrid G6 and Hybrid R1 systems.
It contains PL05MP1, DP10MP1, RL6 46W UV lamp, RQS6 quartz sleeve, food-grade lubricant and two O-rings, covering the principal filtration and ultraviolet consumable components specified for these systems.
Before ordering, confirm that your installed unit is a Hybrid G6 or R1. Puretec specifies cartridge replacement every 6 months, annual UV lamp replacement and quartz-sleeve inspection approximately every 3 months depending on source-water quality. During servicing, isolate both water and electrical power, maintain the correct cartridge sequence and check the complete system for leaks before returning it to normal operation.
