Rinnai Enviroflo GR Series 280L Heat Pump Hot Water System

The Rinnai Enviroflo GR Series 280L Heat Pump Hot Water System is available from Installed Today as a supply-only heat pump water heater or as a complete supply and install package in selected Brisbane and Gold Coast service areas, where available.

Choose the unit only if you already have a licensed plumber and electrician arranged, or check your supply and install package to confirm standard installation, valve kit requirements, outdoor location suitability, drainage, electrical suitability, site access, water pressure requirements and available installation timeframes before checkout.

The Rinnai Enviroflo GR Series 280L heat pump is a larger-capacity electric integrated heat pump hot water system designed for family homes wanting lower energy use than a standard electric storage tank. With 280L tank volume, R290 refrigerant, built-in Wi-Fi control, solar PV compatibility, 2.4kW electric boost element, 46 dB(A) quiet operation, and sizing for up to 5 people, it is a strong upgrade option for replacing a medium to large electric hot water system.

About the Rinnai Enviroflo GR Series 280L Heat Pump

The Rinnai Enviroflo GR Series 280L Heat Pump uses heat from the surrounding air to heat stored water, helping reduce water heating energy use compared with a standard electric storage water heater.

Instead of relying only on an electric element, the heat pump absorbs ambient heat and transfers that energy into the stored water using a refrigeration process. This allows the system to provide efficient hot water while still storing a practical amount of hot water for daily family use.

The 280L GR Series model is designed for households needing more capacity than a 215L heat pump, while still being slightly smaller than the 300L GR Series option. It can suit family homes, townhouses, rental properties and households with moderate to higher daily hot water demand.

Buy Rinnai Enviroflo GR Series 280L Supply Only

Order the Rinnai Enviroflo GR Series 280L Heat Pump Hot Water System online as a supply-only hot water system where available. This option is ideal if you already have a licensed plumber, electrician or installer arranged and only need the unit supplied.

The supply-only product price is for the hot water system itself. Installation, old system removal, disposal, valve kits, electrical work, plumbing alterations, drainage changes, compliance upgrades and additional site requirements are not included unless selected separately as add-ons.

Supply-only is best for customers searching for:

• Rinnai Enviroflo GR Series 280L price

• Rinnai Enviroflo GR 280 heat pump

• Rinnai EHPG280VM heat pump hot water system

• Rinnai 280L heat pump supply only

• 280L heat pump hot water system supply only

• Rinnai heat pump water heater

• R290 heat pump hot water system

• 15 amp heat pump hot water system

• Heat pump replacement for electric storage hot water

Rinnai Enviroflo GR Series 280L Supplied and Installed in Brisbane & Gold Coast

Installed Today can supply and install the Rinnai Enviroflo GR Series 280L Heat Pump Hot Water System in selected Brisbane and Gold Coast service areas, where the product and installation pathway are available.

This option is designed for customers who want the heat pump supplied and professionally installed through one streamlined online order. The supply and install pathway helps confirm whether this system suits your property, whether a valve kit is required, whether the installation location is suitable, whether drainage is available, whether the electrical connection is suitable, and whether any additional installation add-ons may be needed before checkout.

The installed-from price is based on the product plus the matching standard installation option. Final pricing may vary depending on site access, electrical suitability, drainage, valve requirements, old system removal or disposal selections, pipework changes, base requirements, compliance requirements and selected add-ons.

Rinnai Enviroflo GR Series 280L Installation in Brisbane

For Brisbane customers, the Rinnai Enviroflo GR Series 280L Heat Pump can be ordered with supply and install options through Installed Today where available. This is suitable for homes replacing an existing electric hot water system where the current location, access, plumbing, drainage and electrical setup are suitable for the selected installation option.

The 280L size can be a strong fit for Brisbane family homes, townhouses, rental properties, investment homes and households wanting to upgrade from standard electric storage to a more efficient heat pump hot water system.

Customers in selected Brisbane suburbs can complete the installation check before checkout to confirm whether standard heat pump installation, valve kit selection, electrical work, drainage, extra plumbing add-ons, old system removal or disposal options may be required.

This makes the page suitable for customers searching for Rinnai Enviroflo GR 280 installation Brisbane, Rinnai heat pump supplied and installed Brisbane, and 280L heat pump hot water replacement Brisbane.

Rinnai Enviroflo GR Series 280L Installation in Gold Coast

Gold Coast customers can also order the Rinnai Enviroflo GR Series 280L Heat Pump Hot Water System with supply and install options in selected service areas, where available.

This pathway is useful for homeowners, landlords, property managers, renovators and unit owners who want the product and installation organised together instead of buying the heat pump separately and arranging trades afterwards.

Complete the supply and install check to confirm whether the existing setup is suitable and whether additional items such as valve kits, electrical work, drainage changes, pipework, base support, access requirements or old system disposal may be required.

This helps customers searching for Rinnai Enviroflo GR 280 installed Gold Coast, Rinnai heat pump installation Gold Coast, and 280L heat pump supply and install Gold Coast.

Is the Rinnai Enviroflo GR Series 280L Right for Your Home?

The Rinnai Enviroflo GR Series 280L Heat Pump may be suitable if you are replacing a medium to large electric storage water heater and want a modern heat pump system with smart controls, solar PV compatibility and efficient hot water performance.

It is commonly suited to family homes, larger townhouses, rental properties, investment properties and households wanting lower water heating energy use than a standard electric storage tank.

The 280L model is sized for up to 5 people, depending on shower length, hot water usage, tariff setup, climate, installation location, airflow, drainage, electrical supply and household hot water habits.

This system may suit you if:

• You are replacing an existing electric hot water system

• You want a 280L heat pump hot water system

• Your household has up to 5 people, depending on usage

• You want more storage than a 215L heat pump

• You want a heat pump that can use ambient air to heat water

• You want built-in Wi-Fi control

• You want SmartLife App control capability

• You want solar PV compatibility

• You want multiple operating modes

• You want R290 refrigerant

• You want a 2.4kW electric boost element

• You have suitable airflow, drainage and installation space

• Your electrical setup can support the 15 amp plug requirement

• You want the choice of supply only or supply and install

Extra work may be required if:

• The system is being moved to a new location

• A suitable 15 amp power supply is not available

• Existing valves are old, missing or non-compliant

• Extra pipework or drainage changes are needed

• Electrical upgrades or circuit changes are required

• Access is restricted

• A compliant base, tray, drainage or insulation is required

• The old system needs additional removal or disposal work

• The installation location has poor airflow or unsuitable clearances

• The existing setup does not suit a heat pump installation

• Water pressure requires pressure control changes

• The existing location does not suit the tank size, height, access or filled weight

Key Features of the Rinnai Enviroflo GR Series 280L

• 280L electric integrated heat pump hot water system

• Product code EHPG280VM

• Suitable for up to 5 people

• Suitable for up to 2 bathrooms and 4 bedrooms under Rinnai’s sizing guide

• Larger GR Series heat pump option for family homes

• Designed to replace electric storage hot water systems

• Uses heat from surrounding air to heat water

• Can use more than 70% less energy compared with a standard electric storage water heater under stated conditions

• Built-in Wi-Fi for SmartLife App control

• Solar PV compatibility

• Option to run during off-peak electricity periods

• R290 refrigerant

• Low Global Warming Potential refrigerant

• Inbuilt electric element to help maintain reliable hot water supply

• Multiple operating modes: Standard, ECO, Hybrid, Electric and Vacation

• Ambient heat pump operating range from -7°C to 45°C

• Built-in anti-frost function

• Auto disinfection function

• Auto restart after power outage

• Quiet 46 dB(A) sound level

• IP24 ingress protection rating

• 1000 kPa PTR valve setting

• 15 amp plug fitted

• Can be hardwired where suitable

• Federal STC eligibility where requirements are met

• State-based incentives may be available where requirements are met

• 7-year cylinder parts warranty under Rinnai warranty terms

• 5-year cylinder labour warranty under Rinnai warranty terms

• 5-year refrigeration components parts and labour warranty under Rinnai warranty terms

• 1-year other components parts and labour warranty under Rinnai warranty terms

Quick Specs

Brand: Rinnai
Range: Enviroflo GR Series Heat Pump
Product: Rinnai Enviroflo GR Series 280L Heat Pump
Product Code: EHPG280VM
System Type: Electric Integrated Heat Pump Hot Water System
Tank Volume: 280L
Recommended Household Size: Up to 5 people, depending on usage
Sizing Guide: Up to 2 bathrooms and 4 bedrooms
Installation Type: Heat pump installation where site conditions are suitable
Operating Modes: Standard, ECO, Hybrid, Electric and Vacation
Wi-Fi Control: Built-in Wi-Fi module with SmartLife App capability
Solar PV Compatibility: Yes
Auto Disinfection: Built in
Anti-Frost Protection: Built in
Auto Restart: Yes
Ambient Temperature Range: -7°C to 45°C for heat pump operation
Sound Level: 46 dB(A)
Ingress Protection Rating: IP24
Refrigerant: R290
Refrigerant Mass: 395g
Factory Wired Electric Element: 2.4kW
Refrigeration Module Rated Input: 1.1kW
Installer Wired Total Input: 3.3kW
Power Supply: 220–240V AC / 50Hz
Rated Current: 13.5A
Plug Type: 15 amp plug fitted
Hardwire Option: Can be hardwired where suitable
Maximum Energy Output for PTR Sizing: 7.0kW
Refrigerant Circuit Maximum Pressure: 3091 kPa
Listed COP: 8.5 under stated test conditions
Heat Output: 4.0kW
Unit Height: 1975mm
Diameter: 640mm
Package Size: 2155mm high x 725mm wide x 725mm deep
Hot Outlet Height: 1252mm
Cold Inlet Height: 112mm
Empty Weight: 120kg
Filled Weight: 400kg
Hot and Cold Water Connections: Rp 3/4
PTR Valve Connection: Rp 1/2
PTR Valve Setting: 1000 kPa / 10kW
Fit PLV if Mains Pressure Exceeds With ECV: 680 kPa
Fit PLV if Mains Pressure Exceeds Without ECV: 800 kPa
Recommended PLV Pressure Rating: 500 kPa
Cylinder Parts Warranty: 7 years, subject to Rinnai warranty terms
Cylinder Labour Warranty: 5 years, subject to Rinnai warranty terms
Refrigeration Components Warranty: 5 years parts and labour, subject to Rinnai warranty terms
Other Components Warranty: 1 year parts and labour, subject to Rinnai warranty terms

280L Heat Pump Storage

The 280L tank volume makes the Rinnai Enviroflo GR Series 280L a strong family heat pump option.

It gives more stored hot water than the 215L model and can suit households that need more daily hot water capacity without moving to the 300L GR Series option. This makes it a practical fit for families, larger townhouses, rental homes and properties with moderate to higher hot water demand.

For lower-demand homes, the 215L model may be enough. For larger households, the 300L model may be more suitable.

Efficient Heat Pump Hot Water

The Rinnai Enviroflo GR Series 280L is designed to reduce water heating energy use compared with a standard electric storage water heater.

Heat pump technology works by absorbing heat from the surrounding air and transferring that heat into the stored water. This allows the system to produce hot water efficiently without relying only on direct electric element heating.

Rinnai states the GR Series can use more than 70% less energy than a standard electric water heater under stated conditions. Actual savings can vary depending on location, household usage, tariff setup, installation conditions, the system being replaced and how the product is operated.

R290 Refrigerant

The Rinnai Enviroflo GR Series 280L uses R290 refrigerant.

Rinnai describes R290 as a high-efficiency refrigerant with a very low Global Warming Potential of 0.02. This makes the GR Series a strong option for customers wanting modern heat pump technology with efficient refrigerant performance.

The refrigeration circuit and installation location must be treated according to manufacturer installation requirements and applicable standards.

Built-In Wi-Fi Control

The Rinnai Enviroflo GR Series 280L includes built-in Wi-Fi control for use with the SmartLife App.

This gives homeowners convenient control over system operation and can help manage heating around daily hot water demand, off-peak electricity windows or solar PV generation where suitable.

App use is optional and depends on network setup, compatible device access and third-party app availability.

Solar PV Compatibility

The Rinnai Enviroflo GR Series 280L Heat Pump can be networked with solar PV panel systems.

This can help households align water heating with daytime solar generation where the electrical setup, timer settings and household routine are suitable. The best setup depends on the solar system, tariff arrangement, household hot water use and installation conditions.

Off-Peak Operation Option

The Rinnai Enviroflo GR Series 280L can be set to run during off-peak periods where electricity cost is lower and the tariff setup is suitable.

This can help customers reduce running costs, especially when combined with smart timer control, suitable hot water demand and the right electrical setup.

Multiple Operating Modes

The Rinnai Enviroflo GR Series 280L includes multiple operating modes:

• Standard

• ECO

• Hybrid

• Electric

• Vacation

This gives customers more flexibility to balance energy efficiency, recovery speed, electric boost operation and holiday periods depending on household routines and hot water demand.

2.4kW Electric Boost Element

The Rinnai Enviroflo GR Series 280L includes a 2.4kW factory wired electric element.

The electric element helps maintain reliable hot water supply when boost heating is required, while the heat pump provides the main water heating function under suitable conditions.

This gives the 280L model strong backup support for family homes where daily hot water demand can vary.

15 Amp Plug Fitted

The Rinnai Enviroflo GR Series 280L is supplied with a 15 amp plug fitted and can also be hardwired where suitable.

This is important because it is not the same as a standard 10 amp plug-in appliance. Electrical suitability should be checked before installation, and some sites may require electrical work, a dedicated circuit, power point changes, compliance upgrades or hardwired connection depending on the existing setup.

Anti-Frost and Auto Restart

The Rinnai Enviroflo GR Series 280L includes built-in anti-frost protection to help protect the evaporator in colder climates.

It also includes auto restart, meaning the unit can restart automatically once power is restored after a power outage. These features help support reliability across different operating conditions.

Auto Disinfection Function

The Rinnai Enviroflo GR Series 280L includes an auto disinfection function.

This function is designed to help reduce the potential growth of legionella by periodically raising water temperature as part of the system’s control logic.

Quiet Operation

The Rinnai Enviroflo GR Series 280L has a listed sound level of 46 dB(A).

This makes it a practical residential heat pump option where site placement, clearances, neighbouring bedrooms, windows, fences and walls are still considered during installation.

Installed sound can vary depending on the final location, nearby surfaces and airflow conditions.

Water Pressure and PLV Requirements

The Rinnai Enviroflo GR Series 280L is designed for water pressure conditions that must be checked before installation.

The PTR valve setting is listed at 1000 kPa / 10kW, with pressure limiting requirements depending on whether an expansion control valve is fitted.

Where an expansion control valve is fitted, a pressure limiting valve is required if mains pressure exceeds 680 kPa. Where an expansion control valve is not fitted, a pressure limiting valve is required if mains pressure exceeds 800 kPa. The recommended pressure limiting valve rating is 500 kPa.

STCs and Government Incentives

The Rinnai Enviroflo GR Series 280L Heat Pump may be eligible for Small-scale Technology Certificates where requirements are met.

Eligibility and value can vary depending on installation location, product model, installation date, installer requirements and program rules. Some state-based incentives may also apply where requirements are met.

Any rebate, STC discount or incentive should be confirmed before ordering or installation.

Rinnai Enviroflo GR 215L vs GR 280L

The Rinnai Enviroflo GR Series 280L gives more stored hot water than the GR Series 215L.

The 215L model is sized for up to 4 people and can suit smaller families or moderate-demand homes. The 280L model is sized for up to 5 people, making it better suited to family homes with higher daily hot water use.

The 280L model also uses a 15 amp plug setup, so electrical suitability should be checked before installation.

Rinnai Enviroflo GR 280L vs GR 300L

The Rinnai Enviroflo GR Series 300L provides slightly more storage capacity than the 280L model and is sized for up to 6 people.

The 280L model can suit households up to 5 people, while the 300L model may be better where the household has higher daily use, longer shower habits or wants the extra buffer of the largest GR Series option.

The better choice depends on household size, shower length, tariff setup, available space, installation access and electrical requirements.

Common Uses

The Rinnai Enviroflo GR Series 280L Heat Pump can be suitable for:

• Electric hot water system replacement

• Heat pump hot water upgrades

• Family homes

• Larger townhouses

• Rental properties

• Investment properties

• Homes with up to 5 people, depending on usage

• Homes with up to 2 bathrooms and 4 bedrooms under Rinnai’s sizing guide

• Homes wanting lower energy use than standard electric storage

• Homes with solar PV where timer operation may be useful

• Homes where traditional roof-mounted solar hot water may not be suitable

• Properties needing a 280L heat pump hot water system

• Customers wanting Wi-Fi control and multiple operating modes

• Customers wanting R290 refrigerant

• Supply-only orders where a licensed installer is already arranged

• Supply and install orders in selected Brisbane and Gold Coast areas

Suitability depends on household size, hot water usage, tariff setup, installation location, airflow, drainage, plumbing condition, electrical supply, water pressure and compliance requirements.

Why Order From Installed Today?

Installed Today gives customers a simple way to order the Rinnai Enviroflo GR Series 280L Heat Pump Hot Water System as either a product-only purchase or a supply and install package in selected Brisbane and Gold Coast service areas, where available.

You can compare the unit-only price, check the installed-from price, complete the installation compatibility check and select matching installation add-ons before checkout.

Why customers choose Installed Today:

• Supply only or supply and install options

• Installed-from pricing shown separately

• Compatibility check before checkout

• Valve kits and installation add-ons available online

• Brisbane and Gold Coast service area support

• Suitable for heat pump hot water replacement orders

• Clear product and installation pathway before checkout

• Practical 280L family heat pump replacement option

• Product-only ordering for customers with their own licensed installer

• Supply and install pathway for selected heat pump upgrades

• Built-in Wi-Fi control

• Solar PV compatibility

• R290 refrigerant

• Quiet 46 dB(A) operation

• Suitable for up to 5 people

• 15 amp plug fitted or hardwired option

• Rinnai heat pump hot water system from a recognised hot water brand

Frequently Asked Questions

Can I buy the Rinnai Enviroflo GR Series 280L supply only?

Yes. You can buy the Rinnai Enviroflo GR Series 280L as a supply-only product where available if you already have a licensed installer arranged. The unit-only price does not include installation, old system removal, disposal, valve kits, electrical work, plumbing alterations, drainage changes or compliance upgrades unless selected separately.

Can I get the Rinnai Enviroflo GR Series 280L installed in Brisbane?

Yes. Supply and install options may be available in selected Brisbane service areas. Complete the installation check to confirm whether the standard heat pump installation option suits your property and whether additional add-ons may be required.

Can I get the Rinnai Enviroflo GR Series 280L installed in Gold Coast?

Yes. Selected Gold Coast service areas may be available. Installation suitability depends on access, existing plumbing, electrical requirements, drainage, valve condition, airflow, clearances, water pressure, compliance and selected add-ons.

Is installation included in the product price?

No. The main product price is the unit-only price. The installed-from price is shown separately so you can compare supply only against supply and install.

What does the installed-from price include?

The installed-from price is based on the Rinnai Enviroflo GR Series 280L unit plus the matching standard installation option. Final pricing may vary depending on valve kits, removal or disposal selections, pipework, drainage, electrical work, access, compliance and other selected add-ons.

Do I need a valve kit?

Many hot water replacements require compatible valves to meet installation and compliance requirements. The installation check helps identify whether a valve kit is recommended for your order.

What is the product code for the Rinnai Enviroflo GR Series 280L?

The product code is EHPG280VM.

What is the tank capacity?

The Rinnai Enviroflo GR Series 280L has a 280L tank volume.

How many people is the Rinnai Enviroflo GR Series 280L suitable for?

The Rinnai Enviroflo GR Series 280L is sized for up to 5 people, depending on shower length, hot water usage, climate, tariff setup, installation conditions and household habits.

How many bedrooms and bathrooms can the GR 280L suit?

Rinnai’s sizing guide lists the GR Series 280L as suitable for up to 2 bathrooms and 4 bedrooms, depending on usage and installation conditions.

Can the Rinnai Enviroflo GR Series 280L reduce running costs?

Yes. Rinnai states the GR Series can use more than 70% less energy than a standard electric water heater under stated conditions. Actual savings depend on location, tariff setup, household usage, installation conditions and the system being replaced.

Does the Rinnai Enviroflo GR Series 280L have Wi-Fi?

Yes. The Rinnai Enviroflo GR Series 280L includes built-in Wi-Fi control for use with the SmartLife App.

Can the Rinnai Enviroflo GR Series 280L work with solar PV?

Yes. The GR Series 280L has solar PV compatibility and can be networked with solar PV panels where the site and setup are suitable.

What operating modes does the Rinnai Enviroflo GR Series 280L have?

The system includes Standard, ECO, Hybrid, Electric and Vacation operating modes.

What refrigerant does the Rinnai Enviroflo GR Series 280L use?

The Rinnai Enviroflo GR Series 280L uses R290 refrigerant.

What is the refrigerant mass?

The Rinnai Enviroflo GR Series 280L is listed with 395g of R290 refrigerant.

What is the COP of the Rinnai Enviroflo GR Series 280L?

The Rinnai Enviroflo GR Series 280L has a listed COP of 8.5 under stated test conditions.

What is the heat output?

The Rinnai Enviroflo GR Series 280L has a listed 4.0kW heat output.

What is the sound level?

The Rinnai Enviroflo GR Series 280L has a listed sound level of 46 dB(A).

What is the operating temperature range?

The system is listed for heat pump operation across ambient air conditions from -7°C to 45°C. The electric element can operate beyond the heat pump operating limits.

What is the electric element size?

The Rinnai Enviroflo GR Series 280L has a listed 2.4kW factory wired electric element.

Is the Rinnai Enviroflo GR Series 280L plug-in?

Yes. The Rinnai Enviroflo GR Series 280L is supplied with a 15 amp plug fitted and can also be hardwired where suitable. Electrical suitability should be checked before installation because a standard 10 amp power point may not be suitable.

What is the maximum water pressure setup?

The Rinnai Enviroflo GR Series 280L lists a 1000 kPa PTR valve setting. Pressure limiting requirements depend on whether an expansion control valve is fitted and the site’s mains pressure.

What are the dimensions?

The Rinnai Enviroflo GR Series 280L has a listed unit height of 1975mm and diameter of 640mm.

How much does the Rinnai Enviroflo GR Series 280L weigh?

The listed empty weight is 120kg, and the listed filled weight is 400kg.

What is the IP rating?

The Rinnai Enviroflo GR Series 280L has an IP24 ingress protection rating.

Does the Rinnai Enviroflo GR Series 280L have auto disinfection?

Yes. The system includes an auto disinfection function designed to help reduce the potential growth of legionella.

Does the Rinnai Enviroflo GR Series 280L have anti-frost protection?

Yes. The system includes built-in anti-frost protection to help protect the evaporator in colder climates.

Is the Rinnai Enviroflo GR Series 280L eligible for rebates?

The Rinnai Enviroflo GR Series 280L may be eligible for STCs and other government incentives where requirements are met. Eligibility and value can vary depending on location, installation date, product model, installer requirements and program rules.

What is the warranty on the Rinnai Enviroflo GR Series 280L?

For domestic use, Rinnai lists the GR Series with 7 years cylinder parts warranty, 5 years cylinder labour warranty, 5 years parts and labour warranty on refrigeration components, and 1 year parts and labour warranty on other components, subject to warranty terms and conditions.

Is the Rinnai Enviroflo GR Series 280L good for replacing an electric hot water system?

Yes. The Rinnai Enviroflo GR Series 280L can be a strong heat pump replacement option for selected medium to large electric hot water systems, provided the property has suitable space, airflow, drainage, electrical supply, water pressure and plumbing conditions.

What is the difference between the Rinnai Enviroflo GR Series 215L and 280L?

The GR Series 280L provides more storage capacity than the 215L model and is sized for up to 5 people. The 215L model is better suited to smaller families or moderate-demand households, while the 280L model may be better for family homes with higher daily hot water use.

What is the difference between the Rinnai Enviroflo GR Series 280L and 300L?

The GR Series 300L provides slightly more storage capacity than the 280L model and is sized for up to 6 people. The 280L model is suited to up to 5 people, while the 300L model may suit households needing the largest GR Series storage option.

What is the difference between the Rinnai Enviroflo GR Series 280L and AR Series 300L?

The GR Series 280L is a 280L heat pump sized for up to 5 people, while the AR Series 300L provides slightly larger storage and is sized for up to 6 people. The better option depends on household size, hot water demand, available space, electrical requirements and installation conditions.

* Requested element size may come delivered separately to system for electric systems - All units supplied with factory with 3.6kW

**Where a unit supplied is capable of supplying more than 50°C, a tempering valve must be installed on the property or purchased as part of a valve kit with your order.

Hassle-Free Installation – Done Right by Trusted Experts

Need professional installation? We’ve got you covered! Our optional installation service connects you with our network of certified, trusted contractors, ensuring a smooth and stress-free setup.

How It Works:

🔹 Step 1: Select Installation Service
Choose to include professional installation when purchasing your new system.

🔹 Step 2: Pay for Installation Upfront
Simply add the installation service prior to adding your product to cart —no hidden fees, no surprises.

🔹 Step 3: We Assign a Certified Contractor
We’ll match you with a licensed, experienced contractor from our network to handle the installation.

🔹 Step 4: Schedule Your Installation
The assigned contractor will contact you directly to arrange a convenient time for installation.

🔹 Step 5: Direct Support When You Need It
For any installation-related questions, your contractor is your first point of contact. If any issues arise, our team is here to help.

🚨 Please Note: Installed Today supplies the product and connects you with a certified contractor for installation.

We’re committed to delivering top-quality products and facilitating a seamless installation experience. Have product questions? Reach out to us anytime! 🔥

Buying a new hot water system, water filter, pump or plumbing product should be simple. Installed Today helps you compare the product, the supply-only price and the available installation options in one place, so you can choose what suits your home, budget and timing without the back and forth.

Whether you already know exactly what you need or you are still comparing options, we make it easier to order with confidence.

Why Customers Choose Installed Today

Supply Only or Installed Options

Choose the product on its own, or add installation where available. This gives you the flexibility to buy the way that suits you best.

Clear Pricing Before Checkout

See your product price upfront, then add the installation options or common extras you need before placing your order. No confusing quote forms just to understand your starting price.

Product Details That Actually Help

Key specs, sizing details, warranty information, product features and suitability notes are shown clearly, so you can compare products properly before you buy.

Installation Add-Ons Available

Where relevant, you can add common installation extras such as valve kits, bases, electrical options, removal, access-related items or other site-specific upgrades before checkout.

Built Around Brisbane and Gold Coast Homes

Our product and installation options are selected with common local homes, water quality, plumbing layouts, access issues and replacement requirements in mind.

One Simple Order

Add the product and selected extras to cart in one order, instead of trying to organise separate suppliers, installers and parts.

Practical Help Before You Buy

Not sure which product, size or installation option is right? Installed Today gives you a clearer path to choosing the right system before you order.

Designed To Make Your Decision Easier

Installed Today is built for customers who want a faster, clearer and more convenient way to buy.

Instead of guessing what is included, waiting for basic pricing or trying to work out which extras are needed, you can review the product, compare your options and move forward with confidence.

Choose supply only if you just need the product.

Choose supplied and installed if you want the product installed where available.

Add common extras before checkout if your job needs additional parts or site-specific options.

It is a simpler way to organise the product and the parts of the job that matter most.

Important Note

Installation availability, inclusions and add-ons vary by product type, site access, existing services, selected options and your property requirements. Some installations may require additional work, upgrades or checks before the job can proceed.

Fast & Reliable Delivery – What to Expect

Same Day Delivery: Available in Brisbane and Gold Coast on select units ordered before 8:00am
Express Delivery: 1–4 business days
Standard Delivery: 2–8 business days

Same Day Delivery

Same day delivery is available for selected hot water systems in Brisbane and Gold Coast metro areas when ordered before 8:00am, subject to stock availability, delivery capacity and suitable transport conditions.

Fast Metro Delivery

Most hot water orders in metro areas are delivered quickly, with around 90% arriving within 1 business day.

Weather Delays

Hot water systems cannot always be transported safely by courier during rain. Delivery timeframes may be affected when wet weather impacts safe handling, loading, unloading or transport conditions.

Express Delivery Guarantee

If your express delivery order takes longer than 1–4 business days, we will adjust the delivery timeframe to our standard 2–8 business days and refund your express shipping charge automatically.

Order Tracking

We will send your delivery details as soon as your order has been dispatched.

Need help with your delivery? Contact our team and we’ll be happy to assist.