RANGE OF AVAILABLE REPLACEMENT SYSTEMS
RINNAI HOTFLO GAS STORAGE HOT WATER
Rinnai Hotflo 135L Gas Storage Hot Water System – GHF4135N & GHF4135L
The Rinnai Hotflo 135L Gas Storage Hot Water System is an outdoor mains-pressure storage water heater designed for medium-sized households wanting conventional stored hot water with gas recovery between periods of use.
The current range includes the GHF4135N Natural Gas model and GHF4135L LPG model. Rinnai specifies a 135L storage capacity, 209L first-hour delivery, 4.7 Star energy rating and sizing of up to 5 people in warm climates or 4 people in cool climates.
Installed Today offers the Rinnai Hotflo 135L as a supply-only gas water heater or with supply and installation across eligible Brisbane and Gold Coast service areas.
Rinnai Hotflo 135L at a glance: a 135L outdoor gas storage water heater with 209L first-hour delivery, 74 L/hr published recovery at a 45°C temperature rise, Natural Gas or LPG variants, 4.7 Star energy rating, vitreous-enamel-lined steel cylinder, sacrificial-anode protection, mains-pressure hot-water delivery and an 8-year domestic inner-cylinder replacement guarantee under Rinnai's applicable warranty terms.
ABOUT THE SYSTEM
About the Rinnai Hotflo 135L Gas Storage Water Heater
The Hotflo 135L stores heated water in a vitreous-enamel-lined steel cylinder and automatically reheats the tank using its gas burner as the stored-water temperature falls.
Unlike a continuous-flow gas water heater, the Hotflo keeps a reserve of hot water ready for use. This makes it particularly relevant when replacing an existing outdoor gas storage system without changing to instantaneous gas, electric storage or a heat pump.
The 135L is the smaller of Rinnai's current Hotflo gas storage models, with the 170L available where greater storage capacity and first-hour delivery are required.
WHO IT SUITS
Who Is the Rinnai Hotflo 135L Best For?
Medium-Sized Households
Rinnai lists the 135L for up to five people in warm climates and up to four people in cool climates, depending on actual usage.
Gas Storage Replacements
The Hotflo 135L is particularly relevant where an existing outdoor gas storage water heater is being replaced and the gas type, pipework and location remain suitable.
Multiple Hot-Water Outlets
Rinnai describes the Hotflo range as providing mains-pressure hot water to multiple taps. Actual outlet flow still depends on the property's plumbing and incoming water pressure.
PRODUCT AT A GLANCE
Rinnai Hotflo 135L Key Details
135L
Storage Capacity
209L
First-Hour Delivery
4.7 Star
Energy Rating
8 Years
Domestic Cylinder*
*Rinnai provides a comprehensive one-year parts-and-labour warranty and, for domestic use as defined by Rinnai, an additional seven-year replacement guarantee if the inner cylinder fails. Transport, installation and labour for a replacement after the first year are the owner's responsibility. Full warranty conditions apply.
GAS TYPE
Natural Gas or LPG
GHF4135N – Natural Gas
The GHF4135N is configured for Natural Gas. Rinnai publishes an hourly gas-consumption figure of 17 MJ/hr.
GHF4135L – LPG
The GHF4135L is configured for LPG. Rinnai also publishes an hourly LPG-consumption figure of 17 MJ/hr for the 135L model.
Confirm the property's gas type before ordering. Natural Gas and LPG appliances are separately configured and the correct model must be installed and commissioned by an authorised person.
HOUSEHOLD SIZING
How Many People Does the Rinnai Hotflo 135L Suit?
Warm Climate
Rinnai lists the Hotflo 135L for up to 5 people in warm-climate conditions.
Cool Climate
Rinnai lists the Hotflo 135L for up to 4 people in cool-climate conditions.
Rinnai's sizing guidance assumes efficient outlets. Actual suitability depends on shower length, fixture flow rates, baths, kitchen use, laundry demand and how closely hot-water use occurs together.
FIRST-HOUR DELIVERY
209L First-Hour Delivery
Rinnai publishes a 209 litre first-hour delivery for the Hotflo 135L under its stated test condition of a 45°C temperature rise from a 15°C cold-water supply.
First-hour delivery combines available stored hot water with water reheated by the gas burner during the first hour of draw-off.
Rinnai also publishes an approximate 74 L/hr recovery rate at a 45°C temperature rise for the 135L model.
KEY FEATURES
Key Features of the Rinnai Hotflo 135L
4.7 Star Gas Storage
Rinnai currently rates the Hotflo 135L at 4.7 Stars for gas-storage energy performance.
Vitreous Enamel Cylinder
The steel storage cylinder uses a vitreous-enamel lining to help protect its internal surface from stored-water conditions.
Sacrificial Anode Protection
An internal sacrificial anode forms part of the cylinder's corrosion-protection system and is replaceable during scheduled servicing.
Mains-Pressure Hot Water
Rinnai designs the Hotflo range to provide mains-pressure hot water to multiple connected outlets.
Thermostatic Safety Control
The gas control is thermostatically operated and incorporates automatic safety temperature shut-off protection.
Lead-Free Compliance
Rinnai's current installation manual states that the Hotflo gas storage range complies with the lead-free requirements of the National Construction Code Volume 3.
TECHNICAL DETAILS
Rinnai Hotflo 135L Specifications
| Specification | Rinnai Hotflo 135L |
|---|---|
| Brand | Rinnai |
| Range | Hotflo Gas Storage |
| Natural Gas Model | GHF4135N |
| LPG Model | GHF4135L |
| Installation | External / outdoor only |
| Storage Capacity | 135L |
| First-Hour Delivery | 209L at Rinnai's stated 45°C rise test condition |
| Recovery Rate | 74 L/hr at 45°C rise |
| Energy Rating | 4.7 Star |
| Warm-Climate Sizing | Up to 5 people |
| Cool-Climate Sizing | Up to 4 people |
| Natural Gas Consumption | 17 MJ/hr |
| LPG Consumption | 17 MJ/hr |
| Hot & Cold Water Connections | Rp 3/4 / 20mm |
| Gas Connection to Gas Controller | Rp 1/2 |
| Relief Valve Connection | Rp 1/2 |
| PTR Valve Setting | 1000 kPa |
| Expansion Control Valve | 850 kPa where required |
| Maximum Water Supply Pressure With ECV | 680 kPa |
| Maximum Water Supply Pressure Without ECV | 800 kPa |
| Recommended PLV | 500 kPa where required |
| Tank Lining | Vitreous-enamel-lined steel |
| Anode | Sacrificial anode |
| Empty Weight | 68kg |
| Full Weight | 203kg |
| Domestic Warranty | 1 year parts and labour plus domestic inner-cylinder replacement guarantee through Year 8 |
DIMENSIONS
Rinnai Hotflo 135L Dimensions
1579mm
Overall Height
420mm
Overall Width
508mm
Overall Depth
68kg
Empty Weight
| Dimension | Measurement |
|---|---|
| Overall Height | 1579mm |
| Overall Width | 420mm |
| Overall Depth | 508mm |
| Cold Water Inlet Height | 328mm |
| Hot Water Outlet Height From Ground | 1316mm |
| Hot Water / PTR Port Height Above Cold Inlet | 988mm |
| Gas Pipe Height | 276mm |
| Gas Pipe Depth | 459mm |
| Water / PTR Port Depth | 210mm |
| Empty Weight | 68kg |
| Full Weight | 203kg |
Allow additional room for valves, gas pipework, flue clearances and servicing. Rinnai also requires approximately 50% of the water-heater height above the unit for sacrificial-anode replacement.
OUTDOOR INSTALLATION
The Rinnai Hotflo 135L Is External Use Only
The Hotflo 135L must be installed outdoors. It is not designed as an indoor gas-storage water heater.
Rinnai requires the appliance to be installed on a permanently level, stable and clean-draining surface suitable for the water heater. Rinnai recommends a plinth where the heater is exposed to wet conditions.
Flue-terminal clearances from windows, doors and other building openings must comply with Rinnai's installation instructions and AS/NZS 5601.
SERVICE ACCESS
Allow Space Above the Hotflo 135L
The sacrificial anode is accessed through the top of the water heater.
Rinnai specifies allowing approximately 50% of the water-heater height above the unit so the anode can be removed and replaced.
For the 1579mm-high 135L system, this means substantial overhead clearance should be considered before installing the unit below eaves, shelves or other permanent obstructions.
GAS INSTALLATION
Gas Supply & Connection Requirements
The water heater must be connected to the correct gas type shown on its data label and installed by an authorised person.
Rinnai specifies gas-pipe sizing and installation in accordance with AS/NZS 5601. Pipework must be free of foreign material and purged before the water heater is commissioned.
LPG installations use an external gas regulator in addition to the appliance gas controller and require the LPG commissioning procedure specified by Rinnai.
The GHF4135N Natural Gas and GHF4135L LPG models should not be treated as interchangeable products. Select the gas type that matches the property before ordering.
WATER PRESSURE
Rinnai Hotflo 135L Water Pressure Requirements
Rinnai specifies a maximum direct water-supply pressure of 800 kPa without an expansion-control valve.
Where an 850 kPa expansion-control valve is fitted, the published maximum supply pressure is 680 kPa.
Rinnai recommends a 500 kPa pressure-limiting valve where pressure control is required. The final valve arrangement must comply with the manufacturer's instructions and applicable plumbing requirements.
PTR VALVE
1000 kPa Pressure & Temperature Relief Valve
Rinnai supplies a 1000 kPa PTR valve for the Hotflo gas-storage range.
The valve must be installed directly into the designated relief-valve socket and connected to its own compliant drain line with continuous fall toward the discharge point.
The water heater must not be operated without the PTR valve correctly installed and in working order.
MAINS PRESSURE
Mains-Pressure Hot Water to Multiple Outlets
Rinnai describes the Hotflo gas-storage range as providing mains-pressure hot water to multiple taps.
The 135L storage capacity together with gas recovery can support normal household demand across showers, kitchens and laundries, subject to correct sizing.
Actual pressure and flow at each fixture also depend on the property's incoming water pressure, control valves, pipe sizing and plumbing layout.
TEMPERATURE CONTROL
Thermostatic Temperature & Scald Protection
The Hotflo gas-storage water heater uses thermostatic gas control together with safety temperature shut-off.
Rinnai's current operating instructions recommend a gas-control setting of approximately 5, which produces stored-water temperatures in the region of 60°C to 65°C.
Because stored water at these temperatures can cause severe scalding, suitable delivery-temperature control is required for relevant personal-hygiene outlets in accordance with applicable plumbing requirements.
WATER QUALITY
Sacrificial Anodes & Water Quality
The Hotflo uses a magnesium-based sacrificial anode as standard to help protect the vitreous-enamel-lined steel cylinder.
Rinnai specifies the standard magnesium anode for Total Dissolved Solids up to and including 600 mg/L.
Where TDS exceeds 600 mg/L but does not exceed 2500 mg/L, Rinnai specifies an aluminium-based replacement anode. The manufacturer's warranty does not apply where TDS exceeds 2500 mg/L or other published water-quality limits are exceeded.
135L VS 170L
Rinnai Hotflo 135L vs 170L
| Feature | Hotflo 135L | Hotflo 170L |
|---|---|---|
| Storage Capacity | 135L | 170L |
| First-Hour Delivery | 209L | 257L |
| Recovery @ 45°C Rise | 74 L/hr | 87 L/hr |
| Warm-Climate Guide | Up to 5 people | Up to 6 people |
| Cool-Climate Guide | Up to 4 people | Up to 5 people |
| Energy Rating | 4.7 Star | 4 Star |
| Overall Height | 1579mm | 1915mm |
| Empty Weight | 68kg | 83kg |
The larger 170L may suit households requiring more stored hot water and higher first-hour delivery. Household size alone should not be the only sizing factor.
INSTALLATION REQUIREMENTS
What Is Required to Install the Rinnai Hotflo 135L?
Rinnai requires installation, commissioning, servicing and removal to be completed by an authorised person and in accordance with applicable gas and plumbing requirements.
- Correct GHF4135N Natural Gas or GHF4135L LPG model
- Outdoor-only installation location
- Permanent level and stable supporting surface
- Correct flue clearances under Rinnai instructions and AS/NZS 5601
- Rp 3/4 compatible hot and cold water pipework
- Correct gas pipe sizing and gas isolation
- 1000 kPa PTR valve installation
- Suitable isolation and non-return valve arrangement
- 850 kPa expansion-control valve where required
- Pressure limiting where incoming pressure requires it
- Compliant relief-valve drainage
- Temperature-control device for relevant outlets
- Safe tray where leakage could cause property damage
- Access to gas controls and service components
- Approximately half the heater height above for anode replacement
- Installation compliant with AS/NZS 3500 and AS/NZS 5601
SUPPLY ONLY
Buy the Rinnai Hotflo 135L Supply Only
Choose supply only if you require the Hotflo 135L and already have an appropriately licensed plumber or gas fitter arranged.
The supply-only price covers the selected water heater itself. Installation, site-specific valves, gas fitting work, plumbing alterations, pressure-control equipment, drainage, supporting-base work, old-system removal and disposal are separate unless specifically included in the order.
Before ordering, confirm whether the property requires the GHF4135N Natural Gas or GHF4135L LPG model.
SUPPLY & INSTALL
Rinnai Hotflo 135L Supplied & Installed
Supply Only
Order the correctly configured Hotflo 135L where suitable licensed installation is already arranged.
Brisbane Installation
Eligible Brisbane customers can check available supply-and-install options for replacement of a compatible external gas-storage water heater.
Gold Coast Installation
Eligible Gold Coast customers can also check installation options including gas type, pipework, water pressure, valves, access and compliance requirements.
AUSTRALIA-WIDE SUPPLY
Buy the Rinnai Hotflo 135L Across Australia
Installed Today offers supply-only ordering across supported Australian delivery areas, subject to product availability, with local supply-and-install options available in eligible Brisbane and Gold Coast locations.
Customers outside the local installation area can arrange compliant installation with an appropriately licensed local gas fitter or plumber.
Brisbane
Gold Coast
Sydney
Melbourne
Adelaide
Perth
BRISBANE INSTALLATION
Rinnai Hotflo 135L Installation Brisbane
Eligible Brisbane customers can order the Rinnai Hotflo 135L with a local installation option where available.
A compatible like-for-like replacement is generally more straightforward where the existing appliance is already an outdoor gas-storage system and the gas type, gas pipe sizing, water pipework, valves, pressure, supporting surface and flue clearances remain suitable.
The unit is approximately 1579mm high × 420mm wide × 508mm deep and weighs approximately 68kg empty, so delivery access and service clearance should be checked before ordering.
GOLD COAST INSTALLATION
Rinnai Hotflo 135L Installation Gold Coast
Eligible Gold Coast customers can also check supplied-and-installed options for the Hotflo 135L.
Before installation, confirm the correct Natural Gas or LPG model and check the existing gas supply, pipe sizing, water pressure, valves, supporting base, outdoor clearances and removal requirements for the existing unit.
WHAT MAY REQUIRE EXTRA WORK
Check These Items Before Ordering Installation
- Relocating the gas water heater
- Changing existing gas pipework
- Incorrect gas type at the property
- Gas supply or LPG regulator changes
- Old, missing or non-compliant water valves
- Additional hot or cold water pipework
- Pressure-limiting or expansion-control equipment
- PTR drain alterations
- Tempering or delivery-temperature compliance work
- Unsuitable supporting base or plinth
- Restricted service access or overhead clearance
- Non-compliant flue-terminal location
- Safe-tray installation where required
- Removal and disposal of the existing water heater
MAINTENANCE
Rinnai Hotflo 135L Maintenance
Rinnai specifies regular owner checks together with periodic servicing by authorised personnel.
Every 6 Months
Operate the PTR-valve easing lever for approximately 10 seconds and confirm that water discharges correctly through the relief drain and the valve closes again.
Annual Service
Rinnai states that the water heater should be serviced annually by an authorised service agent to maintain safety and efficiency.
Five-Year Major Service
After each five years of operation, Rinnai recommends replacing the safety valve and anode and flushing the storage tank.
Where Total Dissolved Solids exceed 600 mg/L, Rinnai recommends the major safety-valve and anode service every 3 years.
WARRANTY
Rinnai Hotflo 135L Warranty
Rinnai's current warranty distinguishes between domestic use as defined by the manufacturer and commercial use.
| Coverage | Domestic Use as Defined by Rinnai | Commercial Use |
|---|---|---|
| Parts & Labour | 1 year | 1 year |
| Inner Cylinder | Additional replacement guarantee through Year 8 | No additional 8-year cylinder replacement guarantee |
| Replacement Labour After Year 1 | Owner's responsibility | Subject to one-year commercial warranty |
If the inner cylinder fails during the seven years following the initial one-year domestic warranty, Rinnai states that it will provide a replacement hot-water unit under the replacement guarantee.
The transport, installation and labour costs associated with delivering the replacement and removing and replacing the existing water heater are the owner's responsibility after the first-year warranty period.
Rinnai's definition of domestic use includes specified accommodation applications as well as domestic dwellings. Full warranty terms, exclusions and water-quality requirements apply.
COMMON QUESTIONS
Questions About the Rinnai Hotflo 135L
What are the Rinnai Hotflo 135L model numbers?
The Natural Gas model is GHF4135N and the LPG model is GHF4135L.
How much water does the Hotflo 135L store?
Rinnai specifies a 135 litre storage capacity.
What is the first-hour delivery?
Rinnai publishes 209 litres under its stated 45°C temperature-rise test condition.
What is the recovery rate?
Rinnai publishes approximately 74 L/hr at a 45°C temperature rise.
How many people is the Rinnai Hotflo 135L suitable for?
Rinnai lists it for up to 5 people in warm climates and up to 4 people in cool climates, depending on usage.
What is the energy rating?
The current Rinnai Hotflo 135L has a 4.7 Star gas energy rating.
Is it available in Natural Gas?
Yes. The GHF4135N is the Natural Gas model.
Is it available in LPG?
Yes. The GHF4135L is the LPG model.
What is the gas consumption?
Rinnai publishes 17 MJ/hr for both the Natural Gas and LPG 135L variants.
Can the Rinnai Hotflo 135L be installed indoors?
No. Rinnai specifies the current Hotflo gas-storage range for external use only.
Does it provide mains-pressure hot water?
Yes. Rinnai describes the Hotflo gas-storage range as providing mains-pressure hot water to multiple taps. Actual fixture performance depends on the property's incoming pressure and plumbing.
What are the dimensions?
The 135L model is approximately 1579mm high × 420mm wide × 508mm deep.
How much does it weigh?
Rinnai specifies approximately 68kg empty and 203kg full.
What water connections does it use?
Rinnai specifies Rp 3/4 / 20mm hot and cold water connections.
What is the gas connection?
Rinnai specifies an Rp 1/2 connection to the gas controller, with gas pipe sizing determined in accordance with AS/NZS 5601.
What is the PTR valve setting?
The supplied pressure and temperature relief valve is rated at 1000 kPa.
What is the ECV setting?
Where required, Rinnai specifies an 850 kPa expansion-control valve.
What is the maximum water-supply pressure?
Rinnai publishes 680 kPa with an ECV and 800 kPa without an ECV.
What pressure-limiting valve does Rinnai recommend?
Rinnai publishes a recommended 500 kPa PLV where pressure limiting is required.
Does the Hotflo 135L have an anode?
Yes. It uses a sacrificial anode as part of the cylinder's corrosion-protection system.
Is an anode available for high-TDS water?
Yes. Rinnai specifies an aluminium-alloy anode where Total Dissolved Solids exceed 600 mg/L but remain within the manufacturer's permitted water-quality limits.
How much service clearance is required above the unit?
Rinnai specifies approximately 50% of the water-heater height above the appliance to allow the sacrificial anode to be replaced.
Does the Hotflo 135L require a licensed installer?
Yes. Rinnai states that installation, commissioning, servicing and removal must be performed by an authorised person.
How often should the PTR valve be checked?
Rinnai requires the easing lever to be operated at least once every 6 months.
How often should the Hotflo 135L be serviced?
Rinnai states that the heater should be serviced annually for safety and efficiency and specifies a major safety-valve, anode and flushing service every five years, reduced to three years where TDS exceeds 600 mg/L.
What is the warranty?
For domestic use as defined by Rinnai, the Hotflo receives 1 year parts and labour plus an inner-cylinder replacement guarantee extending through Year 8. Replacement installation, transport and labour after Year 1 are the owner's responsibility.
Can I buy the Rinnai Hotflo 135L supply only?
Yes. Installed Today offers a supply-only pathway where suitable licensed installation is being arranged separately.
Can Installed Today install the Rinnai Hotflo 135L?
Supply-and-install options are available in selected Brisbane and Gold Coast service areas. Final requirements depend on gas type, gas supply, water pressure, valves, pipework, outdoor clearances, access and applicable compliance requirements.
WHY INSTALLED TODAY
Why Order the Rinnai Hotflo 135L From Installed Today?
Supply Only
Unit Ordering
NG / LPG
Gas Options
Australia Wide
Supported Supply
Brisbane & Gold Coast
Installation Options
Installed Today provides a clear pathway to order the Rinnai Hotflo 135L as a product-only purchase or combine it with an eligible local installation option. Confirm gas type, household sizing, gas supply, water pressure, pipework, valves, outdoor clearances, service access and old-system removal requirements before checkout.
FINAL CHECK
Is the Rinnai Hotflo 135L Right for You?
The Rinnai Hotflo 135L is suited to medium-sized households wanting to retain a conventional outdoor gas-storage hot-water system. Its 135L tank, 209L first-hour delivery, 4.7 Star rating and Natural Gas or LPG configurations make it particularly relevant as a replacement for an existing external gas-storage heater.
Before ordering, confirm whether the property requires the GHF4135N Natural Gas or GHF4135L LPG model and check household demand, gas supply, water pressure, installation clearances and service access. Choose supply only where compliant installation is already arranged, or check Installed Today's Brisbane and Gold Coast installation options.
Brand -
Model -
Volume (L) -
Height (mm) -
Width (mm) -
Weight (kg) -
Energy Rating -
Made In -
Made By -
Maximum Warranty -
Internal Material -
Noise Level (dBa) -
Recommend Occupants -
Recommended Bathrooms -
Hassle-Free Installation – Done Right by Trusted Experts!
Need professional installation? We’ve got you covered! Our optional installation service connects you with our network of certified, trusted contractors, ensuring a smooth and stress-free setup.
How It Works:
🔹 Step 1: Select Installation Service
Choose to include professional installation when purchasing your new system.
🔹 Step 2: Pay for Installation Upfront
Simply add the installation service prior to adding your product to cart —no hidden fees, no surprises.
🔹 Step 3: We Assign a Certified Contractor
We’ll match you with a licensed, experienced contractor from our network to handle the installation.
🔹 Step 4: Schedule Your Installation
The assigned contractor will contact you directly to arrange a convenient time for installation.
🔹 Step 5: Direct Support When You Need It
For any installation-related questions, your contractor is your first point of contact. If any issues arise, our team is here to help.
🚨 Please Note: Installed Today supplies the product and connects you with a certified contractor for installation.
We’re committed to delivering top-quality products and facilitating a seamless installation experience. Have product questions? Reach out to us anytime! 🔥
Experience the "Installed Today" Difference with Our Verified Installers
When you choose "Installed Today" for your installation needs, you're not just getting a product; you're gaining access to a network of rigorously verified installers dedicated to providing you with an exceptional service experience. Here's what you can expect when you opt for an installation by an "Installed Today" verified installer:
Professional and Efficient Service
- Prompt Communication: Our verified installers will contact you within 2 business hours of receiving your order details to confirm and begin scheduling your installation at the earliest convenience.
- Expert Installation: All "Installed Today" installers are highly skilled and qualified, ensuring your product is installed according to the highest industry standards and specific regulations in your area.
- Clear and Professional Communication: From the moment they receive your order until the completion of your installation, our installers maintain clear and professional communication, providing you with all necessary information regarding your installation.
Peace of Mind
- Insurance and Liability: Every "Installed Today" verified installer maintains comprehensive insurance coverage, giving you peace of mind knowing you're protected throughout the installation process.
- Warranty and Quality Assurance: Enjoy a warranty on your installation, guaranteeing rectification work at no additional charge in the unlikely event of any deficiencies. Our installers strive to achieve a minimum 4.5-star average rating across major review platforms, reflecting our commitment to excellence and customer satisfaction.
Customer-Centric Policies
- Customer Dispute Resolution: In the rare event of a dispute, our installers are committed to acknowledging and initiating the resolution process within 1 business day, aiming for a swift and satisfactory resolution within 5 business days.
- Rectification Work Timeframes: Should any rectification work be necessary, it will be acknowledged within 1 business day and completed within 2 business days, ensuring minimal inconvenience to you.
Additional Services at Transparent Rates
- Beyond Basic Installation: Our verified installers offer a range of additional services to complement your installation. All available services and their set rates are communicated upfront, ensuring no surprises.
By choosing "Installed Today," you're not just installing a product; you're investing in a seamless, quality service that values your time and peace of mind. Trust in our verified installers to exceed your expectations with their professionalism, expertise, and commitment to excellence.
This product description outlines the benefits and assurances provided by "Installed Today" verified installers, designed to inform and reassure customers about the high level of service they can expect.
DELIVERY TIMES WITH INSTALLATION - HOT WATER SYSTEMS EXC. HEAT PUMPS
Greater Brisbane and Gold Coast (EXCLUDING BAY ISLANDS) - up to 2 business days
Toowoomba, Tweed Heads and Sunshine Coast - up to 3 business days
DELIVERY TIMES WITHOUT INSTALLATION - HOT WATER SYSTEMS EXC. HEAT PUMPS
Greater Brisbane and Gold Coast (EXCLUDING BAY ISLANDS) - up to 3 business days
Toowoomba, Tweed Heads and Sunshine Coast - up to 5 business days
Harvey Bay, Cairns and Townsville - up to 5 business days
Metropolitan Cities - up to 5 Business Days
Listed Metropolitan Centers - up to 10 Business Days
DELIVERY TIMES WITH INSTALLATION - HEAT PUMPS
Greater Brisbane and Gold Coast (EXCLUDING BAY ISLANDS) - up to 2 business days
Toowoomba, Tweed Heads and Sunshine Coast - up to 5 business days
DELIVERY TIMES WITHOUT INSTALLATION - HEAT PUMPS
Greater Brisbane and Gold Coast (EXCLUDING BAY ISLANDS) - up to 5 business days
Toowoomba, Tweed Heads and Sunshine Coast - up to 5 business days
Metropolitan Cities - up to 5 Business Days
Listed Metropolitan Centers - up to 10 Business Days
DELIVERY TIMES WITH/WITHOUT INSTALLATION - PUMPS AND WATER FILTERS
Greater Brisbane and Gold Coast - up to 5 business days
Toowoomba, Tweed Heads and Sunshine Coast - up to 5 business days
Harvey Bay, Cairns and Townsville - up to 10 business days
**PLEASE NOTE ORDERS OUTSIDE OF THESE AREAS WILL BE REFUNDED AS SOON AS POSSIBLE**
SERVICED METROPOLITIAN CENTRES & CITIES
-Brisbane (EXCLUDING BAY ISLANDS)
-Gold Coast
-Sunshine Coast
-Toowoomba
-Coffs Harbour
-Tamworth
-Canberra
-Sydney (EXCLUDING ISLANDS)
-Bathurst
-Melbourne
-Ballarat
-Geelong
-Adelaide
-Perth
-Darwin
-Cairns
-Townsville
-Harvey Bay
-Rockhampton
-Bundaberg
-Tweed Heads
-Wollongong
Recently viewed