Rinnai Enviroflo V2 315L Heat Pump Hot Water System

The Rinnai Enviroflo V2 315L Heat Pump Hot Water System is available from Installed Today as a supply-only heat pump water heater or as a complete supply and install package in selected Brisbane and Gold Coast service areas, where available.

Choose the unit only if you already have a licensed plumber and electrician arranged, or check your supply and install package to confirm standard installation, valve kit requirements, outdoor location suitability, drainage, electrical suitability, site access, water pressure requirements and available installation timeframes before checkout.

The Rinnai Enviroflo V2 315L heat pump is a large-capacity electric integrated heat pump hot water system designed for households wanting lower energy use than a standard electric storage tank. With 315L storage capacity, R290 refrigerant, 2.4kW electric element, 15 amp electrical requirement, 48 dB(A) sound level, 1000 kPa PTR valve setting, and suitability for larger family hot water demand, it is a strong upgrade option for replacing a 315L electric hot water system.

About the Rinnai Enviroflo V2 315L Heat Pump

The Rinnai Enviroflo V2 315L Heat Pump uses heat from the surrounding air to heat stored water, helping reduce water heating energy use compared with a standard electric storage hot water system.

Instead of relying only on direct electric element heating, the heat pump uses a refrigeration process to draw heat from ambient air and transfer that energy into the water. The electric element provides backup support when ambient conditions are outside the preferred heat pump operating range or when extra recovery is required.

The 315L size makes this model a practical fit for larger families, rental properties, investment homes, shared households and customers replacing an older 315L electric storage system where a higher-capacity heat pump is preferred.

Buy Rinnai Enviroflo V2 315L Supply Only

Order the Rinnai Enviroflo V2 315L Heat Pump Hot Water System online as a supply-only hot water system where available. This option is ideal if you already have a licensed plumber, electrician or installer arranged and only need the unit supplied.

The supply-only product price is for the hot water system itself. Installation, old system removal, disposal, valve kits, electrical work, plumbing alterations, drainage changes, compliance upgrades and additional site requirements are not included unless selected separately as add-ons.

Supply-only is best for customers searching for:

• Rinnai Enviroflo V2 315L price

• Rinnai Enviroflo 315L heat pump

• Rinnai EHPA315VM heat pump hot water system

• Rinnai 315L heat pump supply only

• 315L heat pump hot water system supply only

• Rinnai heat pump water heater

• R290 heat pump hot water system

• Heat pump replacement for electric storage hot water

• Large capacity heat pump hot water system

Rinnai Enviroflo V2 315L Supplied and Installed in Brisbane & Gold Coast

Installed Today can supply and install the Rinnai Enviroflo V2 315L Heat Pump Hot Water System in selected Brisbane and Gold Coast service areas, where the product and installation pathway are available.

This option is designed for customers who want the heat pump supplied and professionally installed through one streamlined online order. The supply and install pathway helps confirm whether this system suits your property, whether a valve kit is required, whether the installation location is suitable, whether drainage is available, whether the electrical connection is suitable, and whether any additional installation add-ons may be needed before checkout.

The installed-from price is based on the product plus the matching standard installation option. Final pricing may vary depending on site access, electrical suitability, drainage, valve requirements, old system removal or disposal selections, pipework changes, base requirements, compliance requirements and selected add-ons.

Rinnai Enviroflo V2 315L Installation in Brisbane

For Brisbane customers, the Rinnai Enviroflo V2 315L Heat Pump can be ordered with supply and install options through Installed Today where available. This is suitable for homes replacing an existing electric hot water system where the current location, access, plumbing, drainage and electrical setup are suitable for the selected installation option.

The 315L size can be a strong fit for Brisbane family homes, larger townhouses, rental properties and investment homes wanting to upgrade from standard electric storage to a more efficient heat pump hot water system.

Customers in selected Brisbane suburbs can complete the installation check before checkout to confirm whether standard heat pump installation, valve kit selection, electrical work, drainage, extra plumbing add-ons, old system removal or disposal options may be required.

This makes the page suitable for customers searching for Rinnai Enviroflo V2 315L installation Brisbane, Rinnai heat pump supplied and installed Brisbane, and 315L heat pump hot water replacement Brisbane.

Rinnai Enviroflo V2 315L Installation in Gold Coast

Gold Coast customers can also order the Rinnai Enviroflo V2 315L Heat Pump Hot Water System with supply and install options in selected service areas, where available.

This pathway is useful for homeowners, landlords, property managers, renovators and unit owners who want the product and installation organised together instead of buying the heat pump separately and arranging trades afterwards.

Complete the supply and install check to confirm whether the existing setup is suitable and whether additional items such as valve kits, electrical work, drainage changes, pipework, base support, access requirements or old system disposal may be required.

This helps customers searching for Rinnai Enviroflo V2 315L installed Gold Coast, Rinnai heat pump installation Gold Coast, and 315L heat pump supply and install Gold Coast.

Is the Rinnai Enviroflo V2 315L Right for Your Home?

The Rinnai Enviroflo V2 315L Heat Pump may be suitable if you are replacing a larger electric storage water heater and want a recognised-brand heat pump system with efficient hot water performance.

It is commonly suited to larger family homes, rental properties, investment properties and households wanting lower water heating energy use than a standard electric storage tank.

The 315L model can suit larger households, depending on shower length, hot water usage, tariff setup, climate, installation location, airflow, drainage, electrical supply and household hot water habits.

This system may suit you if:

• You are replacing an existing 315L electric hot water system

• You want a large-capacity heat pump hot water system

• Your household has higher daily hot water demand

• You want a heat pump that uses surrounding air to heat water

• You want R290 refrigerant

• You want a 2.4kW electric backup element

• You want a 15 amp heat pump system

• You want more stored capacity than a 250L heat pump

• You want a recognised Rinnai hot water product

• You have suitable airflow, drainage and installation space

• Your electrical setup can support the required supply

• You want the choice of supply only or supply and install

Extra work may be required if:

• The system is being moved to a new location

• A suitable 15 amp electrical supply is not available

• Existing valves are old, missing or non-compliant

• Extra pipework or drainage changes are needed

• Electrical upgrades or circuit changes are required

• Access is restricted

• A compliant base, tray, drainage or insulation is required

• The old system needs additional removal or disposal work

• The installation location has poor airflow or unsuitable clearances

• The existing setup does not suit a heat pump installation

• Water pressure requires pressure control changes

• The property requires a hard water anode version

• Internal installation does not meet required room volume or ventilation conditions

• The existing location does not suit the extra tank height, access or filled weight

Key Features of the Rinnai Enviroflo V2 315L

• 315L electric integrated heat pump hot water system

• Model family includes EHPA315VM variants

• Large-capacity heat pump option for family homes

• Suitable for higher daily hot water demand

• Designed to replace electric storage hot water systems

• Uses heat from surrounding air to heat water

• R290 refrigerant

• 300g refrigerant mass

• 2.4kW factory wired electric element

• 1.0kW refrigeration module rated input

• 3.4kW total rated input to be wired by installer

• 15 amp rated current

• 240V AC 50Hz power supply

• 48 dB(A) listed sound level

• IP24 ingress protection rating

• Heat pump operation from -1°C to 45°C ambient temperature

• 1000 kPa PTR valve setting

• 500 kPa recommended pressure limiting valve rating where required

• Rp 3/4 hot and cold water connections

• Rp 1/2 PTR valve connection

• Factory weekly 60°C heat cycle for regulatory temperature requirements

• Hot discharge bypass defrosting function

• External or internal installation where requirements are met

• Designed to be installed upright and free-standing

• 500mm fan discharge clearance requirement

• 150mm fan suction clearance requirement

• 7-year cylinder warranty under Rinnai warranty terms

Quick Specs

Brand: Rinnai
Range: Enviroflo V2 Heat Pump
Product: Rinnai Enviroflo V2 315L Heat Pump
Model Family: EHPA315VM
System Type: Electric Integrated Heat Pump Hot Water System
Tank Volume: 315L
Recommended Household Size: Larger households, depending on usage
Installation Type: External or internal where installation requirements are met
Sound Level: 48 dB(A)
Ambient Temperature Range: -1°C to 45°C for heat pump operation
Ingress Protection Rating: IP24
Refrigerant: R290
Refrigerant Mass: 300g
Refrigerant Circuit Maximum Pressure: 3800 kPa
Factory Wired Electric Element: 2.4kW
Refrigeration Module Rated Input: 1.0kW
Total Rated Input: 3.4kW, wired by installer
Maximum Energy Output for PTR Sizing: 4.29kW
Power Supply: 240V AC / 50Hz
Rated Current: 15A
Net Weight: 132kg
Filled Weight: 445kg
Cylinder Height: 2165mm
Cylinder Diameter: 611mm
Hot Outlet / PTR Height: 1541mm
Cold Water Inlet Height: 210mm
Hot and Cold Water Connections: Rp 3/4
PTR Valve Connection: Rp 1/2
PTR Valve Setting: 1000 kPa / 10kW
Fit PLV if Mains Pressure Exceeds With ECV: 680 kPa
Fit PLV if Mains Pressure Exceeds Without ECV: 800 kPa
Recommended PLV Pressure Rating: 500 kPa
Fan Discharge Clearance: 500mm minimum
Fan Suction Clearance: 150mm minimum
Cylinder Warranty: 7 years, subject to Rinnai warranty terms

315L Heat Pump Storage

The 315L tank volume makes the Rinnai Enviroflo V2 315L a strong large-capacity heat pump option.

It gives more stored hot water than the 250L model, making it better suited to larger households, family homes, rental properties and sites where daily hot water demand is higher.

For lower-demand homes, the 250L model may be enough. For households wanting more stored hot water and a larger replacement size, the 315L model is the stronger option.

Efficient Heat Pump Hot Water

The Rinnai Enviroflo V2 315L is designed to reduce water heating energy use compared with a standard electric storage water heater.

Heat pump technology works by absorbing heat from the surrounding air and transferring that heat into the stored water. This allows the system to heat water efficiently without relying only on direct electric element heating.

Actual energy savings depend on the system being replaced, household usage, installation location, ambient temperature, tariff setup, timer settings, airflow, water temperature and daily hot water demand.

R290 Refrigerant

The Rinnai Enviroflo V2 315L uses R290 refrigerant, with a listed refrigerant mass of 300g.

R290 is a high-efficiency refrigerant used in modern heat pump systems. Because it is a flammable refrigerant, the unit must be installed, handled, transported and serviced according to manufacturer requirements and relevant standards.

2.4kW Electric Element

The Rinnai Enviroflo V2 315L includes a 2.4kW factory wired electric element.

The electric element provides backup heating support when required, including during very cold conditions or when heat pump-only operation needs assistance. This helps maintain hot water availability while allowing the heat pump to provide the main water heating function under suitable conditions.

15 Amp Electrical Requirement

The Rinnai Enviroflo V2 315L is listed with a 15 amp rated current and requires a suitable electrical supply.

Electrical suitability must be checked before installation. Some properties may need electrical work, a dedicated circuit, isolator, switchboard changes, compliance upgrades or other electrical add-ons depending on the existing setup.

This should not be treated like a simple plug-in appliance swap unless the selected model and site conditions have been confirmed as suitable.

Weekly 60°C Heat Cycle

The Rinnai Enviroflo V2 315L is factory set to heat all water in the tank to 60°C once per week to meet regulatory requirements.

This factory-set function supports safe stored water temperature management and cannot be altered.

Hot Discharge Bypass Defrosting

The Rinnai Enviroflo V2 315L includes a hot discharge bypass defrosting function.

When the fan coil temperature reaches freezing conditions, the system can operate a defrosting cycle to help clear ice from the evaporator and maintain heat pump operation.

Quiet Residential Operation

The Rinnai Enviroflo V2 315L has a listed sound level of 48 dB(A).

This makes it suitable for many residential installations where the unit can be positioned with proper clearances and sensible distance from bedrooms, neighbouring windows and noise-sensitive areas.

Installed sound can vary depending on walls, fences, corners, airflow, mounting surface and final unit position.

External or Internal Installation

The Rinnai Enviroflo V2 315L can be installed externally or internally where all installation requirements are met.

Most residential heat pump installations are positioned outdoors because heat pumps need airflow and condensate drainage. Internal installation requires suitable room volume, ventilation, clearances and positioning away from ignition sources or corrosive environments.

The unit must be installed upright, free-standing, accessible for servicing and positioned on a level, stable base. The system must not be installed in a roof space.

Drainage and Condensate Requirements

As a heat pump, the Rinnai Enviroflo V2 315L produces condensate during operation.

The condensate drain must be directed to a suitable discharge point. Heat pump installations also need correct PTR valve drainage, safe tray requirements where applicable and plumbing that complies with installation standards.

Drainage suitability should be confirmed before ordering or installation, especially where the existing electric hot water system did not previously require a condensate drain.

Water Pressure and PLV Requirements

The Rinnai Enviroflo V2 315L has a listed 1000 kPa PTR valve setting.

Where an expansion control valve is fitted, a pressure limiting valve is required if mains pressure exceeds 680 kPa. Where an expansion control valve is not fitted, a pressure limiting valve is required if mains pressure exceeds 800 kPa. The recommended pressure limiting valve rating is 500 kPa.

Pressure control should be checked before installation to protect the system and support correct operation.

Clearance Requirements

The Rinnai Enviroflo V2 315L needs adequate airflow for correct heat pump operation.

Minimum listed clearances include 500mm on the fan discharge side and 150mm on the fan suction side. The area around the unit should also be clear of debris, leaves, branches and obstructions that could affect airflow.

Poor airflow can reduce performance and may affect system operation, noise and recovery.

Larger Filled Weight and Site Access

The Rinnai Enviroflo V2 315L has a listed filled weight of 445kg, so the installation location must be suitable for a large-capacity tank once filled with water.

Access should also be checked carefully. Tight side paths, stairs, raised platforms, uneven bases, narrow gates and long carries may require extra labour or make the location unsuitable.

A stable, level base is important for safe installation and long-term system performance.

Rinnai Enviroflo V2 250L vs 315L

The Rinnai Enviroflo V2 315L provides more stored hot water than the Rinnai Enviroflo V2 250L.

The 250L model can suit many family homes with moderate hot water demand. The 315L model is better suited to larger households, higher daily hot water use, rental properties or homes where extra stored capacity is preferred.

Both models share key V2 features such as R290 refrigerant, 2.4kW electric element, 15 amp rated current, 48 dB(A) sound level, IP24 ingress protection and heat pump operation from -1°C to 45°C. The main reason to choose the 315L model is the larger tank capacity.

STCs and Government Incentives

The Rinnai Enviroflo V2 315L Heat Pump may be eligible for Small-scale Technology Certificates where requirements are met.

Eligibility and value can vary depending on installation location, product model, installation date, installer requirements and program rules. Some state-based incentives may also apply where requirements are met.

Any rebate, STC discount or incentive should be confirmed before ordering or installation.

Common Uses

The Rinnai Enviroflo V2 315L Heat Pump can be suitable for:

• Electric hot water system replacement

• 315L electric hot water replacement

• Heat pump hot water upgrades

• Larger family homes

• Townhouses

• Rental properties

• Investment properties

• Homes with higher daily hot water use

• Homes wanting lower energy use than standard electric storage

• Homes where gas hot water is not suitable

• Homes where roof-mounted solar hot water may not be suitable

• Properties needing a 315L heat pump hot water system

• Customers wanting a Rinnai heat pump water heater

• Customers wanting R290 refrigerant

• Supply-only orders where a licensed installer is already arranged

• Supply and install orders in selected Brisbane and Gold Coast areas

Suitability depends on household size, hot water usage, tariff setup, installation location, airflow, drainage, plumbing condition, electrical supply, water pressure and compliance requirements.

Why Order From Installed Today?

Installed Today gives customers a simple way to order the Rinnai Enviroflo V2 315L Heat Pump Hot Water System as either a product-only purchase or a supply and install package in selected Brisbane and Gold Coast service areas, where available.

You can compare the unit-only price, check the installed-from price, complete the installation compatibility check and select matching installation add-ons before checkout.

Why customers choose Installed Today:

• Supply only or supply and install options

• Installed-from pricing shown separately

• Compatibility check before checkout

• Valve kits and installation add-ons available online

• Brisbane and Gold Coast service area support

• Suitable for heat pump hot water replacement orders

• Clear product and installation pathway before checkout

• Large 315L heat pump replacement option

• Product-only ordering for customers with their own licensed installer

• Supply and install pathway for selected heat pump upgrades

• R290 refrigerant

• 2.4kW backup element

• Suitable for larger household hot water demand

• Rinnai heat pump hot water system from a recognised hot water brand

Frequently Asked Questions

Can I buy the Rinnai Enviroflo V2 315L supply only?

Yes. You can buy the Rinnai Enviroflo V2 315L as a supply-only product where available if you already have a licensed installer arranged. The unit-only price does not include installation, old system removal, disposal, valve kits, electrical work, plumbing alterations, drainage changes or compliance upgrades unless selected separately.

Can I get the Rinnai Enviroflo V2 315L installed in Brisbane?

Yes. Supply and install options may be available in selected Brisbane service areas. Complete the installation check to confirm whether the standard heat pump installation option suits your property and whether additional add-ons may be required.

Can I get the Rinnai Enviroflo V2 315L installed in Gold Coast?

Yes. Selected Gold Coast service areas may be available. Installation suitability depends on access, existing plumbing, electrical requirements, drainage, valve condition, airflow, clearances, water pressure, compliance and selected add-ons.

Is installation included in the product price?

No. The main product price is the unit-only price. The installed-from price is shown separately so you can compare supply only against supply and install.

What does the installed-from price include?

The installed-from price is based on the Rinnai Enviroflo V2 315L unit plus the matching standard installation option. Final pricing may vary depending on valve kits, removal or disposal selections, pipework, drainage, electrical work, access, compliance and other selected add-ons.

Do I need a valve kit?

Many hot water replacements require compatible valves to meet installation and compliance requirements. The installation check helps identify whether a valve kit is recommended for your order.

What is the product code for the Rinnai Enviroflo V2 315L?

The model family is commonly listed as EHPA315VM. Variant naming may depend on the product listing, supplier availability and whether a standard, Wi-Fi or hard water anode version is being supplied.

What is the tank capacity?

The Rinnai Enviroflo V2 315L has a 315L tank volume.

How many people is the Rinnai Enviroflo V2 315L suitable for?

The Rinnai Enviroflo V2 315L can suit larger household hot water demand. Real-world suitability depends on shower length, daily hot water use, climate, tariff setup, installation conditions and household habits.

Can the Rinnai Enviroflo V2 315L reduce running costs?

Yes. Heat pump hot water systems are designed to reduce water heating energy use compared with standard electric storage systems. Actual savings depend on location, electricity tariff, household usage, installation conditions and the system being replaced.

What refrigerant does the Rinnai Enviroflo V2 315L use?

The Rinnai Enviroflo V2 315L uses R290 refrigerant, with a listed refrigerant mass of 300g.

What is the sound level?

The Rinnai Enviroflo V2 315L has a listed sound level of 48 dB(A).

What is the operating temperature range?

The system is listed for heat pump operation across ambient air conditions from -1°C to 45°C. The electric element can operate beyond the heat pump operating limits when water heating is required.

What is the electric element size?

The Rinnai Enviroflo V2 315L has a listed 2.4kW factory wired electric element.

What electrical supply does the Rinnai Enviroflo V2 315L need?

The system is listed for 240V AC 50Hz power supply with 15 amp rated current. Electrical suitability should be checked before installation.

Is the Rinnai Enviroflo V2 315L plug-in or hardwired?

The Enviroflo V2 315L should be treated as requiring a suitable 15 amp electrical installation. The correct connection depends on the selected variant and site requirements, and electrical work must be completed by an authorised person.

Does the Rinnai Enviroflo V2 315L have a weekly disinfection cycle?

The thermostat control is factory preset to heat all water in the tank to 60°C once per week to meet regulatory requirements.

Can the Rinnai Enviroflo V2 315L be installed inside?

It can be installed internally only where internal installation requirements are met, including minimum room volume, ventilation, clearances, drainage, safe location and compliance requirements. Where those requirements cannot be met, outdoor installation is required.

What are the dimensions?

The Rinnai Enviroflo V2 315L is listed with a 2165mm cylinder height and 611mm cylinder diameter.

How much does the Rinnai Enviroflo V2 315L weigh?

The listed net weight is 132kg, and the listed filled weight is 445kg.

What is the IP rating?

The Rinnai Enviroflo V2 315L has an IP24 ingress protection rating.

What is the PTR valve setting?

The PTR valve setting is listed as 1000 kPa / 10kW.

What pressure limiting valve rating is recommended?

The recommended pressure limiting valve rating is 500 kPa where pressure limiting is required.

What clearances does the unit need?

The listed minimum clearances include 500mm on the fan discharge side and 150mm on the fan suction side to support proper airflow.

Is there a hard water version?

Hard water anode variants may be available depending on the product listing and supplier availability. These are intended for sites where water quality makes a hard water anode version more suitable.

Is the Rinnai Enviroflo V2 315L eligible for rebates?

The Rinnai Enviroflo V2 315L may be eligible for STCs and other government incentives where requirements are met. Eligibility and value can vary depending on location, installation date, product model, installer requirements and program rules.

What is the warranty on the Rinnai Enviroflo V2 315L?

Rinnai Enviroflo heat pump warranty terms depend on the exact model and warranty document. The Enviroflo V2 range is commonly associated with a 7-year cylinder warranty, subject to Rinnai warranty terms and conditions.

Is the Rinnai Enviroflo V2 315L good for replacing an electric hot water system?

Yes. The Rinnai Enviroflo V2 315L can be a strong replacement option for selected larger electric hot water systems, provided the property has suitable space, airflow, drainage, electrical supply, water pressure and plumbing conditions.

What is the difference between the Rinnai Enviroflo V2 250L and 315L?

The Enviroflo V2 315L provides more stored hot water capacity than the 250L model and may suit larger households or higher daily hot water use. The 250L model is more compact and can suit many family homes where a 315L unit is not required.

What is the difference between the Rinnai Enviroflo V2 315L and Rinnai GR Series 300L?

The Enviroflo V2 315L is an earlier 315L heat pump model family with 15 amp electrical requirements, while the GR Series 300L is a newer 300L heat pump model with current GR Series features and a 10 amp plug configuration. The better option depends on availability, household demand, electrical setup, price and installation requirements.

Brand -

Model -

Volume (L) -

Height (mm) -

Width (mm) -

Weight (kg) -

Energy Rating - 

Made In -

Made By -

Maximum Warranty -

Internal Material -

Noise Level (dBa) -

Recommend Occupants -

Recommended Bathrooms -

Hassle-Free Installation – Done Right by Trusted Experts!

Need professional installation? We’ve got you covered! Our optional installation service connects you with our network of certified, trusted contractors, ensuring a smooth and stress-free setup.

How It Works:

🔹 Step 1: Select Installation Service
Choose to include professional installation when purchasing your new system.

🔹 Step 2: Pay for Installation Upfront
Simply add the installation service prior to adding your product to cart —no hidden fees, no surprises.

🔹 Step 3: We Assign a Certified Contractor
We’ll match you with a licensed, experienced contractor from our network to handle the installation.

🔹 Step 4: Schedule Your Installation
The assigned contractor will contact you directly to arrange a convenient time for installation.

🔹 Step 5: Direct Support When You Need It
For any installation-related questions, your contractor is your first point of contact. If any issues arise, our team is here to help.

🚨 Please Note: Installed Today supplies the product and connects you with a certified contractor for installation.

We’re committed to delivering top-quality products and facilitating a seamless installation experience. Have product questions? Reach out to us anytime! 🔥

Experience the "Installed Today" Difference with Our Verified Installers

When you choose "Installed Today" for your installation needs, you're not just getting a product; you're gaining access to a network of rigorously verified installers dedicated to providing you with an exceptional service experience. Here's what you can expect when you opt for an installation by an "Installed Today" verified installer:

Professional and Efficient Service

• Prompt Communication: Our verified installers will contact you within 2 business hours of receiving your order details to confirm and begin scheduling your installation at the earliest convenience.
• Expert Installation: All "Installed Today" installers are highly skilled and qualified, ensuring your product is installed according to the highest industry standards and specific regulations in your area.
• Clear and Professional Communication: From the moment they receive your order until the completion of your installation, our installers maintain clear and professional communication, providing you with all necessary information regarding your installation.

Peace of Mind

• Insurance and Liability: Every "Installed Today" verified installer maintains comprehensive insurance coverage, giving you peace of mind knowing you're protected throughout the installation process.
• Warranty and Quality Assurance: Enjoy a warranty on your installation, guaranteeing rectification work at no additional charge in the unlikely event of any deficiencies. Our installers strive to achieve a minimum 4.5-star average rating across major review platforms, reflecting our commitment to excellence and customer satisfaction.

Customer-Centric Policies

• Customer Dispute Resolution: In the rare event of a dispute, our installers are committed to acknowledging and initiating the resolution process within 1 business day, aiming for a swift and satisfactory resolution within 5 business days.
• Rectification Work Timeframes: Should any rectification work be necessary, it will be acknowledged within 1 business day and completed within 2 business days, ensuring minimal inconvenience to you.

Additional Services at Transparent Rates

• Beyond Basic Installation: Our verified installers offer a range of additional services to complement your installation. All available services and their set rates are communicated upfront, ensuring no surprises.

By choosing "Installed Today," you're not just installing a product; you're investing in a seamless, quality service that values your time and peace of mind. Trust in our verified installers to exceed your expectations with their professionalism, expertise, and commitment to excellence.

This product description outlines the benefits and assurances provided by "Installed Today" verified installers, designed to inform and reassure customers about the high level of service they can expect.

DELIVERY TIMES WITH INSTALLATION - HOT WATER SYSTEMS EXC. HEAT PUMPS

Greater Brisbane and Gold Coast (EXCLUDING BAY ISLANDS) - up to 2 business days

Toowoomba, Tweed Heads and Sunshine Coast - up to 3 business days

DELIVERY TIMES WITHOUT INSTALLATION - HOT WATER SYSTEMS EXC. HEAT PUMPS

Greater Brisbane and Gold Coast (EXCLUDING BAY ISLANDS) - up to 3 business days

Toowoomba, Tweed Heads and Sunshine Coast - up to 5 business days

Harvey Bay, Cairns and Townsville - up to 5 business days

Metropolitan Cities - up to 5 Business Days

Listed Metropolitan Centers - up to 10 Business Days

DELIVERY TIMES WITH INSTALLATION - HEAT PUMPS

Greater Brisbane and Gold Coast (EXCLUDING BAY ISLANDS) - up to 2 business days

Toowoomba, Tweed Heads and Sunshine Coast - up to 5 business days

DELIVERY TIMES WITHOUT INSTALLATION - HEAT PUMPS

Greater Brisbane and Gold Coast (EXCLUDING BAY ISLANDS) - up to 5 business days

Toowoomba, Tweed Heads and Sunshine Coast - up to 5 business days

Metropolitan Cities - up to 5 Business Days

Listed Metropolitan Centers - up to 10 Business Days

DELIVERY TIMES WITH/WITHOUT INSTALLATION - PUMPS AND WATER FILTERS

Greater Brisbane and Gold Coast - up to 5 business days

Toowoomba, Tweed Heads and Sunshine Coast - up to 5 business days

Harvey Bay, Cairns and Townsville - up to 10 business days

**PLEASE NOTE ORDERS OUTSIDE OF THESE AREAS WILL BE REFUNDED AS SOON AS POSSIBLE**

SERVICED METROPOLITIAN CENTRES & CITIES

-Brisbane (EXCLUDING BAY ISLANDS)

-Gold Coast

-Sunshine Coast

-Toowoomba

-Coffs Harbour

-Tamworth

-Canberra

-Sydney (EXCLUDING ISLANDS)

-Bathurst

-Melbourne

-Ballarat

-Geelong

-Adelaide

-Perth

-Darwin

-Cairns

-Townsville

-Harvey Bay

-Rockhampton

-Bundaberg

-Tweed Heads

-Wollongong