RANGE OF AVAILABLE REPLACEMENT SYSTEMS
STIEBEL ELTRON HEAT PUMP HOT WATER
Stiebel Eltron WWK 222 220L Heat Pump Hot Water System
The Stiebel Eltron WWK 222 is a 220L heat pump hot water system designed for households wanting efficient electric hot water using surrounding air as the primary heat source. It features active defrost, solar PV compatibility, an encased compressor and a maintenance-free impressed current anode.
Installed Today offers the WWK 222 as a supply-only heat pump hot water system, with supply and installation options available across eligible Brisbane and Gold Coast service areas.
This is the standard non-H WWK 222 model. It does not include the 1.7 kW smart element fitted to the WWK 222H, so customers wanting additional recovery support should compare the two versions before ordering.
Stiebel Eltron WWK 222 at a glance: this is a 220L heat pump storage hot water system with a seasonal COP of 3.94, active defrost, solar PV compatibility, a maintenance-free impressed current anode and indoor or outdoor installation capability where suitable. It is the standard non-H model and does not include the 1.7 kW smart element used in the WWK 222H.
WHAT IT DOES
What Does the Stiebel Eltron WWK 222 Do?
The WWK 222 uses heat pump technology to draw thermal energy from the surrounding air and transfer that energy into the water stored inside its 220L cylinder.
This reduces reliance on direct electric resistance heating as the primary method of producing hot water and makes the WWK 222 an option for households wanting to replace a conventional electric storage system where the installation location is suitable.
WHO IT SUITS
Who Is the Stiebel Eltron WWK 222 Best For?
Smaller to Medium Households
The 220L cylinder may suit smaller to medium households with moderate hot water demand, depending on shower duration, flow rates, bath use, household routines and recovery expectations.
Electric Hot Water Upgrades
The WWK 222 may suit homes replacing an older electric storage hot water system where sufficient airflow, drainage, access and electrical provision are available.
Standard Non-H Applications
This model suits customers specifically wanting the standard WWK 222 rather than the WWK 222H with its additional 1.7 kW smart element.
WHO IT HELPS
What Problems Can the WWK 222 Help Solve?
High Electric Storage Energy Use
The system uses ambient air as its primary heat source instead of heating the complete cylinder solely through a conventional electric resistance element.
Need for a Mid-Size Heat Pump
The 220L cylinder provides an option for households that do not require the larger 302L capacity of the WWK 302.
Solar-Compatible Hot Water
The WWK 222 supports solar PV integration where correctly configured, allowing hot water operation to make use of available self-generated electricity.
PRODUCT AT A GLANCE
Stiebel Eltron WWK 222 Key Details
220L
Cylinder Capacity
3.94
Seasonal COP
0.55 kW
Heat Pump Power
-5°C to +42°C
Operating Range
PRODUCT SUITABILITY
Is the Stiebel Eltron WWK 222 Right for My Home?
A Good Choice If...
You want a 220L heat pump, have moderate household hot water demand, want solar PV compatibility, or are replacing electric storage and have a suitable heat pump installation position.
Consider Another Option If...
You want the additional recovery support of the WWK 222H smart element, require the larger storage capacity of the WWK 302, or cannot provide suitable airflow, drainage, access or installation clearances.
Check Before Ordering
Confirm access, base support, airflow, condensate drainage, incoming water pressure, electrical provision, existing valve condition and whether the standard WWK 222 or WWK 222H better suits your hot water use.
SIZE & APPLICATION
What Size Home Does the Stiebel Eltron WWK 222 Suit?
How Many People Does the WWK 222 Suit?
The supplied product information positions the WWK 222 for smaller to medium households. Actual suitability depends on household hot water use rather than occupant numbers alone.
How Much 40°C Hot Water Can It Deliver?
The supplied product information states that the 220L WWK 222 can deliver up to 360 litres of 40°C shower-temperature water when based on a 20°C cold water temperature under the stated conditions.
When Should I Consider the Larger WWK 302?
The 302L WWK 302 may be worth considering where the household has greater hot water demand, wants more stored capacity or regularly has several high-use periods close together.
HOW IT WORKS
How Does the Stiebel Eltron WWK 222 Work?
1. Ambient Air
The heat pump draws thermal energy from the surrounding air through its refrigeration circuit.
2. Heat Transfer
The captured energy is transferred into water stored inside the enamelled steel cylinder.
3. Stored Hot Water
The heated water remains stored for household use and is reheated through normal heat pump operation as required.
KEY FEATURES
Key Features of the Stiebel Eltron WWK 222
220L Storage Capacity
The 220L cylinder provides stored hot water capacity suited to applications where a larger 302L model may not be required.
Standard Non-H Model
The WWK 222 is the standard model and does not include the 1.7 kW smart element fitted to the WWK 222H.
Active Defrost
Active defrost helps remove frost from the evaporator and supports heat pump operation at ambient temperatures down to -5°C.
Impressed Current Anode
The maintenance-free impressed current anode provides corrosion protection without routine sacrificial-anode replacement under normal conditions.
Solar PV Compatibility
The system supports solar PV integration where correctly configured, helping households make use of available solar generation for hot water.
Encased Compressor
The compressor is encased to help manage operating noise, with a listed average sound pressure level of 45 dB(A) at 1 metre.
TECHNICAL DETAILS
Stiebel Eltron WWK 222 Specifications
| Specification | Details |
|---|---|
| Brand | Stiebel Eltron |
| Range | WWK |
| Model | WWK 222 |
| Article Number | 231209 |
| Product Type | Heat pump storage hot water system |
| Rated Cylinder Capacity | 220L |
| Model Type | Standard non-H model |
| Smart Element | No |
| Heat Pump Power Consumption | 0.55 kW at EN16147 / A15 |
| Rated Voltage | 240 V |
| Rated Current | 10 A |
| Heat Pump Current Draw | 2.3 A at 240 V as noted in the supplied product information |
| Connection | 1/N/PE |
| Electrical Installation | As per AS/NZS 3000 |
| Installation Requirements | AS/NZS 3500.4.2 and applicable local requirements |
| Cylinder Material | Enamelled steel |
| Maximum Available Nominal Hot Water at 40°C | Up to 360L under stated conditions |
| Maximum Permissible Operating Pressure | 850 kPa |
| Seasonal COP | 3.94 |
| Operating Temperature Range | -5°C to +42°C |
| Air Flow Rate | 550 m³/h |
| IP Rating | IP24 |
| Refrigerant | R134a |
| Refrigerant Capacity | 0.85 kg |
| Height | 1553–1569 mm with adjustable feet |
| Diameter | 690 mm |
| Empty Weight | 120 kg |
| Filled Weight | Approximately 340 kg |
| Sound Pressure Level | 45 dB(A) at 1 m |
| Minimum Indoor Space | 13 m³ |
| Outdoor Clearance | 500 mm either side of the grille |
| Installation | Indoor or outdoor where suitable |
| Approvals | WaterMark Lic. No. WMKA00301, AS3498 |
| Warranty | Current Stiebel Eltron warranty terms apply |
STANDARD MODEL
WWK 222 Standard Model — Not the WWK 222H
This product is the standard Stiebel Eltron WWK 222. It does not include the 1.7 kW smart element fitted to the WWK 222H.
Both models use a 220L cylinder, but the WWK 222H provides an additional smart element designed to assist recovery during periods of higher hot water use.
If additional assisted recovery is important for your household, compare the WWK 222 with the WWK 222H before ordering.
INSTALLATION REQUIREMENTS
What Is Required to Install the Stiebel Eltron WWK 222?
The WWK 222 must be installed in a location that provides adequate airflow, drainage, structural support, correct water pressure and suitable electrical provision.
- Suitable level and structurally adequate base
- Access suitable for a 690 mm diameter unit
- Suitable hot and cold water connections
- Correct water pressure and valve arrangement
- Condensate drainage
- Safety valve discharge drainage
- Suitable electrical supply
- Required airflow and clearances
- Minimum 13 m³ indoor space where installed indoors
- 500 mm clearance either side of the grille for applicable outdoor installation
- Suitable service access
- Installation in accordance with applicable Australian standards and local requirements
INDOOR & OUTDOOR INSTALLATION
Can the WWK 222 Be Installed Indoors or Outdoors?
Yes. The WWK 222 can be installed indoors or outdoors where the position satisfies the applicable installation requirements.
Indoor Installation
The supplied product information lists a minimum indoor room volume of 13 m³ so cold air from the refrigeration system can diffuse appropriately. Suitable airflow, drainage and service access are also required.
Outdoor Installation
Outdoor installation requires suitable airflow, drainage, structural support and access. The supplied information lists 500 mm clearance either side of the grille.
WATER PRESSURE & DRAINAGE
Water Pressure, Valves and Condensate Requirements
The WWK 222 has a listed maximum permissible operating pressure of 850 kPa.
Incoming water pressure should be checked before installation. A pressure limiting valve or replacement valve kit may be required depending on the property's incoming pressure, existing plumbing and installation requirements.
Heat pumps produce condensate during normal operation, so the installation position must provide suitable condensate drainage in addition to the required hot water safety-valve discharge drainage.
REPLACEMENT & UPGRADES
Can the WWK 222 Replace My Existing Hot Water System?
The WWK 222 may be suitable for replacing an older electric storage hot water system where the installation position can accommodate the unit's dimensions, approximately 340 kg filled weight, airflow, drainage and electrical requirements.
A heat pump replacement is not automatically like-for-like simply because the existing tank has a similar capacity. Heat pumps have additional airflow and condensate requirements that must be considered before installation.
Relocating the System
Moving the new WWK 222 away from the existing hot water position can require additional pipework, electrical work, condensate drainage, base preparation and installation labour.
WHAT'S INCLUDED
What's Included With the Stiebel Eltron WWK 222?
Supply Only
Choose supply only if you already have appropriately licensed plumbing and electrical trades arranged. The product price covers the WWK 222 unit and applicable manufacturer-supplied components.
Supplied & Installed
Where available, select an Installed Today installation package for the unit plus the applicable standard installation scope. Site suitability still needs to be confirmed.
Possible Additional Work
Valve replacement, old-system removal, disposal, electrical work, pipework changes, drainage, condensate management, pressure control, relocation, base work and restricted access may require additional charges.
SUPPLY OR INSTALL
Choose How You Want to Order the WWK 222
Supply Only
Choose supply only if you already have suitable licensed trades arranged and only require the Stiebel Eltron WWK 222 unit supplied.
Brisbane Installation
Supplied and installed options are available across eligible Brisbane service areas, subject to access, site conditions and installation availability.
Gold Coast Installation
Supplied and installed options are available across eligible Gold Coast service areas, subject to site suitability and installation availability.
SUPPLY OPTIONS
Buy the Stiebel Eltron WWK 222 From Installed Today
Installed Today offers supply-only ordering for customers who already have their own licensed plumber and electrician arranged. Delivery availability and freight requirements depend on the destination and order.
Eligible Brisbane and Gold Coast customers can also select supplied-and-installed options where available.
Brisbane
Gold Coast
Supply Only
Licensed Installer Required
BRISBANE INSTALLATION
Stiebel Eltron WWK 222 Supply & Installation Brisbane
Brisbane customers can order the WWK 222 with an eligible supply and installation package. The 220L system may suit homes replacing older electric storage hot water where heat pump efficiency, active defrost and solar PV compatibility are wanted without stepping up to the larger 302L model.
Before installation, the site should be checked for unit access, base support, airflow, drainage, water pressure, electrical supply, existing valves and compliance requirements. Additional work outside the selected standard installation scope may incur extra charges.
GOLD COAST INSTALLATION
Stiebel Eltron WWK 222 Supply & Installation Gold Coast
Eligible Gold Coast customers can select the WWK 222 as a supplied and installed heat pump package. Its 220L storage capacity may suit townhouses, family homes, rental properties, investment properties and renovations with moderate hot water requirements.
Installation still requires suitable airflow, condensate drainage, structural support, electrical provision and correct water pressure. Restricted access, relocation or upgrades to existing services can change the final installation scope.
PERFORMANCE & OWNERSHIP
How Efficient Is the Stiebel Eltron WWK 222?
The WWK 222 has a listed seasonal COP of 3.94. COP compares useful heat output with electrical input under specified test conditions. Heat pumps can achieve a COP above 1 because they transfer thermal energy from ambient air rather than generating all heat through direct electrical resistance.
Actual household energy consumption varies with ambient temperature, inlet water temperature, hot water use, airflow, installation location, operating settings, tariff structure and solar PV availability.
What Is the Heat Pump Power Consumption?
The listed heat pump power consumption is 0.55 kW under the stated EN16147 / A15 condition. The supplied product information also notes a heat pump current draw of 2.3 A at 240 V.
Can the WWK 222 Use Solar PV?
Yes. The WWK 222 supports solar PV integration where the electrical and control arrangement is configured appropriately. This can allow hot water heating to be aligned with periods of available solar generation.
Can It Run on Off-Peak Power?
The WWK 222 can operate with off-peak arrangements where available and where the selected operating schedule provides adequate hot water recovery for the household.
COMPARE YOUR OPTIONS
WWK 222 vs WWK 222H vs WWK 302
| Feature | WWK 222 | WWK 222H | WWK 302 |
|---|---|---|---|
| Cylinder Capacity | 220L | 220L | 302L |
| Smart Element | No | Yes – 1.7 kW | No |
| Maximum Nominal 40°C Hot Water | Up to 360L under stated conditions | Up to 360L under stated conditions | Up to 540L under stated conditions |
| Primary Difference | 220L standard non-H model | 220L H-model with smart-element recovery support | Larger 302L standard non-H model |
WWK 222 vs WWK 222H
Both models use a 220L cylinder. The key difference is that the WWK 222H includes a 1.7 kW smart element designed to assist hot water recovery during higher usage. The standard WWK 222 does not include this feature.
WWK 222 vs WWK 302
The WWK 222 has a 220L cylinder and can provide up to 360L of nominal 40°C hot water under the stated conditions. The WWK 302 increases storage to 302L and can provide up to 540L under its stated conditions.
The larger WWK 302 may be worth considering where the household has greater hot water demand or wants more stored capacity.
REBATES & INCENTIVES
Is the Stiebel Eltron WWK 222 Eligible for STCs or Rebates?
Heat pump hot water systems may qualify for STCs or other incentive programs depending on the eligible product, installation date, installation location and current program rules.
Eligibility and incentive values can change. Any rebate or incentive should be confirmed for the specific order and installation rather than assumed before purchase.
COMMON QUESTIONS
Questions About the Stiebel Eltron WWK 222
Can I buy the Stiebel Eltron WWK 222 supply only?
Yes. The WWK 222 can be purchased as a supply-only unit if you already have appropriately licensed plumbing and electrical trades arranged.
Can Installed Today install the WWK 222?
Supply and installation options are available across eligible Brisbane and Gold Coast service areas, subject to site suitability and installation availability.
Is installation included in the product price?
No. The product price is for the unit unless an installed option is selected. Installation labour, valves, old-system removal, electrical work, drainage and other site-specific requirements are separate unless expressly included in the selected package.
Is this the WWK 222H?
No. This page is for the standard WWK 222, not the WWK 222H.
Does the WWK 222 have a smart element?
No. The standard WWK 222 does not include the 1.7 kW smart element. That feature is included in the WWK 222H.
What is the Stiebel Eltron WWK 222 article number?
The listed article number is 231209.
What size is the WWK 222?
The WWK 222 has a cylinder capacity of 220 litres.
How much 40°C hot water can it provide?
The supplied product information states that it can provide up to 360 litres of 40°C shower-temperature water under the stated conditions.
What are the dimensions?
The listed height is approximately 1553–1569 mm with adjustable feet and the unit has a 690 mm diameter.
How much does the WWK 222 weigh?
The listed empty weight is 120 kg. Its approximate filled weight is 340 kg.
What is the sound level?
The listed average sound pressure level is 45 dB(A) at 1 metre. Perceived noise can still vary depending on the installation position and surrounding reflective surfaces.
Does the WWK 222 have active defrost?
Yes. Active defrost supports operation in colder ambient conditions and helps the system operate down to -5°C.
Can the WWK 222 be installed outdoors?
Yes. Outdoor installation is possible where the position provides suitable airflow, drainage, access, structural support and the required clearances.
Can the WWK 222 be installed indoors?
Yes. Indoor installation may be possible where the required ventilation, drainage and space conditions are met. The supplied information lists a minimum indoor space requirement of 13 m³.
What outdoor clearance does the WWK 222 need?
The supplied product information lists 500 mm clearance either side of the grille. Full installation requirements should be checked for the final position.
What refrigerant does the WWK 222 use?
The listed refrigerant is R134a, with a listed refrigerant capacity of 0.85 kg.
What is the maximum permissible operating pressure?
The supplied product information lists the maximum permissible operating pressure as 850 kPa.
What is the seasonal COP?
The listed seasonal COP is 3.94.
Can the WWK 222 work with solar PV?
Yes. Solar PV integration is supported where the heat pump and electrical control arrangement are configured correctly.
Can the WWK 222 run on off-peak electricity?
Yes. Off-peak operation may be possible where the property has a suitable tariff and the available heating window provides adequate recovery for the household.
Does the WWK 222 need condensate drainage?
Yes. Heat pumps produce condensate during normal operation, so suitable condensate drainage is required.
Is electrical work included with installation?
Electrical work is not automatically included unless it forms part of the selected installation package. Circuit, power supply or other electrical changes may require additional work.
Is the WWK 222 suitable for hard water areas?
The supplied product information states that the WWK range is suitable for hard or soft water areas and uses a maintenance-free impressed current anode.
Can the WWK 222 replace an old electric storage system?
It may be suitable provided the property has adequate space, airflow, drainage, electrical supply, water pressure and access for a heat pump installation.
What is the difference between the WWK 222 and WWK 222H?
The WWK 222 is the standard 220L heat pump model. The WWK 222H adds a 1.7 kW smart element to assist hot water recovery during higher usage.
What is the difference between the WWK 222 and WWK 302?
The WWK 222 has a 220L cylinder, while the WWK 302 has a larger 302L cylinder. The WWK 302 may suit homes wanting greater stored hot water capacity.
WARRANTY & MAINTENANCE
Stiebel Eltron WWK 222 Warranty and Maintenance
Current Stiebel Eltron warranty terms apply to the WWK 222. Warranty periods, individual component coverage, exclusions and claim requirements should be checked against the current manufacturer warranty documentation applicable at the time of purchase.
The system uses a maintenance-free impressed current anode, so it does not rely on routine sacrificial-anode replacement under normal conditions. The complete hot water installation still requires appropriate maintenance, including checking valves, drainage, system operation and other components in accordance with manufacturer instructions and applicable requirements.
WHY INSTALLED TODAY
Why Buy the Stiebel Eltron WWK 222 From Installed Today?
Installed Today gives customers a straightforward choice between purchasing the WWK 222 as a supply-only heat pump or selecting an eligible supplied-and-installed package in Brisbane or the Gold Coast.
Supply Only
For Customers With Their Own Installer
Online Options
Clear Product and Installation Pathways
Brisbane
Eligible Installation Areas
Gold Coast
Eligible Installation Areas
FINAL CHECK
Is the Stiebel Eltron WWK 222 Right for You?
The Stiebel Eltron WWK 222 is primarily suited to customers wanting a 220L heat pump hot water system without the smart element included in the WWK 222H. Key features include a seasonal COP of 3.94, active defrost, solar PV compatibility, a maintenance-free impressed current anode and indoor or outdoor installation capability where the required conditions are met.
Before ordering, confirm that the property can accommodate the unit's 690 mm diameter, 1553–1569 mm height, approximately 340 kg filled weight, airflow, drainage, water pressure and electrical requirements. Choose supply only if your licensed installer is already arranged, or select an eligible Brisbane or Gold Coast supply and installation option where available.
Brand -
Model -
Volume (L) -
Height (mm) -
Width (mm) -
Weight (kg) -
Energy Rating -
Made In -
Made By -
Maximum Warranty -
Internal Material -
Noise Level (dBa) -
Recommend Occupants -
Recommended Bathrooms -
Hassle-Free Installation – Done Right by Trusted Experts!
Need professional installation? We’ve got you covered! Our optional installation service connects you with our network of certified, trusted contractors, ensuring a smooth and stress-free setup.
How It Works:
🔹 Step 1: Select Installation Service
Choose to include professional installation when purchasing your new system.
🔹 Step 2: Pay for Installation Upfront
Simply add the installation service prior to adding your product to cart —no hidden fees, no surprises.
🔹 Step 3: We Assign a Certified Contractor
We’ll match you with a licensed, experienced contractor from our network to handle the installation.
🔹 Step 4: Schedule Your Installation
The assigned contractor will contact you directly to arrange a convenient time for installation.
🔹 Step 5: Direct Support When You Need It
For any installation-related questions, your contractor is your first point of contact. If any issues arise, our team is here to help.
🚨 Please Note: Installed Today supplies the product and connects you with a certified contractor for installation.
We’re committed to delivering top-quality products and facilitating a seamless installation experience. Have product questions? Reach out to us anytime! 🔥
Experience the "Installed Today" Difference with Our Verified Installers
When you choose "Installed Today" for your installation needs, you're not just getting a product; you're gaining access to a network of rigorously verified installers dedicated to providing you with an exceptional service experience. Here's what you can expect when you opt for an installation by an "Installed Today" verified installer:
Professional and Efficient Service
- Prompt Communication: Our verified installers will contact you within 2 business hours of receiving your order details to confirm and begin scheduling your installation at the earliest convenience.
- Expert Installation: All "Installed Today" installers are highly skilled and qualified, ensuring your product is installed according to the highest industry standards and specific regulations in your area.
- Clear and Professional Communication: From the moment they receive your order until the completion of your installation, our installers maintain clear and professional communication, providing you with all necessary information regarding your installation.
Peace of Mind
- Insurance and Liability: Every "Installed Today" verified installer maintains comprehensive insurance coverage, giving you peace of mind knowing you're protected throughout the installation process.
- Warranty and Quality Assurance: Enjoy a warranty on your installation, guaranteeing rectification work at no additional charge in the unlikely event of any deficiencies. Our installers strive to achieve a minimum 4.5-star average rating across major review platforms, reflecting our commitment to excellence and customer satisfaction.
Customer-Centric Policies
- Customer Dispute Resolution: In the rare event of a dispute, our installers are committed to acknowledging and initiating the resolution process within 1 business day, aiming for a swift and satisfactory resolution within 5 business days.
- Rectification Work Timeframes: Should any rectification work be necessary, it will be acknowledged within 1 business day and completed within 2 business days, ensuring minimal inconvenience to you.
Additional Services at Transparent Rates
- Beyond Basic Installation: Our verified installers offer a range of additional services to complement your installation. All available services and their set rates are communicated upfront, ensuring no surprises.
By choosing "Installed Today," you're not just installing a product; you're investing in a seamless, quality service that values your time and peace of mind. Trust in our verified installers to exceed your expectations with their professionalism, expertise, and commitment to excellence.
This product description outlines the benefits and assurances provided by "Installed Today" verified installers, designed to inform and reassure customers about the high level of service they can expect.
DELIVERY TIMES WITH INSTALLATION - HOT WATER SYSTEMS EXC. HEAT PUMPS
Greater Brisbane and Gold Coast (EXCLUDING BAY ISLANDS) - up to 2 business days
Toowoomba, Tweed Heads and Sunshine Coast - up to 3 business days
DELIVERY TIMES WITHOUT INSTALLATION - HOT WATER SYSTEMS EXC. HEAT PUMPS
Greater Brisbane and Gold Coast (EXCLUDING BAY ISLANDS) - up to 3 business days
Toowoomba, Tweed Heads and Sunshine Coast - up to 5 business days
Harvey Bay, Cairns and Townsville - up to 5 business days
Metropolitan Cities - up to 5 Business Days
Listed Metropolitan Centers - up to 10 Business Days
DELIVERY TIMES WITH INSTALLATION - HEAT PUMPS
Greater Brisbane and Gold Coast (EXCLUDING BAY ISLANDS) - up to 2 business days
Toowoomba, Tweed Heads and Sunshine Coast - up to 5 business days
DELIVERY TIMES WITHOUT INSTALLATION - HEAT PUMPS
Greater Brisbane and Gold Coast (EXCLUDING BAY ISLANDS) - up to 5 business days
Toowoomba, Tweed Heads and Sunshine Coast - up to 5 business days
Metropolitan Cities - up to 5 Business Days
Listed Metropolitan Centers - up to 10 Business Days
DELIVERY TIMES WITH/WITHOUT INSTALLATION - PUMPS AND WATER FILTERS
Greater Brisbane and Gold Coast - up to 5 business days
Toowoomba, Tweed Heads and Sunshine Coast - up to 5 business days
Harvey Bay, Cairns and Townsville - up to 10 business days
**PLEASE NOTE ORDERS OUTSIDE OF THESE AREAS WILL BE REFUNDED AS SOON AS POSSIBLE**
SERVICED METROPOLITIAN CENTRES & CITIES
-Brisbane (EXCLUDING BAY ISLANDS)
-Gold Coast
-Sunshine Coast
-Toowoomba
-Coffs Harbour
-Tamworth
-Canberra
-Sydney (EXCLUDING ISLANDS)
-Bathurst
-Melbourne
-Ballarat
-Geelong
-Adelaide
-Perth
-Darwin
-Cairns
-Townsville
-Harvey Bay
-Rockhampton
-Bundaberg
-Tweed Heads
-Wollongong
Recently viewed