PURETEC HYBRID MAINTENANCE KIT
Puretec HR-G13R11P Maintenance Kit for Hybrid P Series, G13 & R11
The Puretec HR-G13R11P Maintenance Kit is the manufacturer-specified service kit for all Puretec Hybrid P Series systems as well as compatible Hybrid G13 and Hybrid R11 filtration systems.
It brings together the three replacement filtration cartridges, the UV lamp, quartz sleeve and housing-service components required for a comprehensive Hybrid system maintenance service.
The kit includes the PL05MP2 pleated sediment cartridge, CB05MP2 carbon block cartridge, PX01MP2 polyspun sediment cartridge, RL6 46W UV lamp, RQS6 quartz sleeve, food-grade lubricant and two replacement O-rings.
Quick answer:
the Puretec HR-G13R11P is the complete genuine maintenance kit for all Hybrid P Series systems plus Hybrid G13 and R11. It replaces the three filtration cartridges and includes the RL6 UV lamp, RQS6 quartz sleeve, lubricant and O-rings needed for a broader scheduled service. The RQS6 is a quartz sleeve, not a filter cartridge.
PRODUCT AT A GLANCE
Puretec HR-G13R11P Key Details
HR-G13R11P
Puretec Kit Model
```
3 Filters
Sediment + Carbon
RL6 + RQS6
UV Service Parts
P / G13 / R11
Compatible Systems
```
WHAT'S INCLUDED
What's Included in the HR-G13R11P Maintenance Kit?
PL05MP2
5 micron, 4.5" × 20" washable pleated sediment cartridge used as the first filtration stage.
```
CB05MP2
5 micron, 4.5" × 20" bonded activated carbon block cartridge for chlorine, taste, odour and sediment reduction.
PX01MP2
1 micron, 4.5" × 20" graded polyspun sediment cartridge used as the fine particulate stage.
RL6 UV Lamp
Puretec 46W high-output UV replacement lamp for the compatible Hybrid ultraviolet chamber.
RQS6 Quartz Sleeve
Replacement quartz sleeve that surrounds the RL6 lamp inside the UV treatment chamber.
O-Rings & Lubricant
The kit also includes two replacement O-rings and food-grade lubricant for applicable housing maintenance.
```
IMPORTANT CORRECTION
The RQS6 Is a Quartz Sleeve, Not a Quick-Twist Cartridge
The Puretec RQS6 is the clear quartz sleeve used inside the UV chamber. It is not an additional filtration cartridge and does not perform sediment or carbon filtration.
The sleeve sits around the RL6 lamp and keeps the electrical lamp separated from the water while allowing ultraviolet light to pass through into the treatment chamber.
RL6 and RQS6 perform different jobs.
The RL6 is the UV lamp that produces ultraviolet light. The RQS6 is the quartz sleeve surrounding the lamp. Both are separate service components within the UV assembly.
COMPATIBILITY
Which Puretec Systems Does This Kit Suit?
Puretec specifies the HR-G13R11P Maintenance Kit for:
- Puretec Hybrid P1
- Puretec Hybrid P3
- Puretec Hybrid P6
- Puretec Hybrid P9
- Puretec Hybrid P12
- Compatible Hybrid P Series variants
- Puretec Hybrid G13
- Puretec Hybrid R11
Always confirm the exact installed model before ordering. Other Puretec Hybrid G and R systems can use different cartridge combinations even where the UV lamp and quartz sleeve appear similar.
COMPLETE HYBRID SERVICE KIT
Filtration & UV Maintenance in One Kit
The HR-G13R11P is designed to service both the filtration side and the UV treatment side of compatible Hybrid systems.
The three cartridges progressively manage coarse sediment, carbon treatment and fine sediment, while the RL6 lamp provides the ultraviolet energy used in the final UV treatment stage.
The RQS6 quartz sleeve, O-rings and lubricant allow other important service components to be addressed during the same maintenance process.
STAGE 1
PL05MP2 Pleated Sediment Cartridge
The PL05MP2 is a washable 5 micron pleated sediment cartridge manufactured from reusable polyester filtration media.
Puretec uses its large pleated surface area to increase dirt-holding capacity, making it suitable as the first stage in high-sediment filtration applications.
5 Micron
Nominal sediment filtration rating of 5 micron.
```
4.5" × 20"
Uses Puretec's large MaxiPlus cartridge format.
Washable Media
Puretec specifies the pleated polyester cartridge as washable and reusable during its applicable service life.
```
STAGE 2
CB05MP2 Carbon Block Cartridge
The CB05MP2 is a 5 micron bonded activated carbon block cartridge designed to significantly reduce chlorine, unwanted taste, odour and sediment.
Its bonded construction provides carbon treatment without loose carbon fines during normal filtration and has a listed individual cartridge flow of up to 48 L/min.
48 L/min is the cartridge specification.
It should not be treated as the flow rating of every complete Hybrid P, G13 or R11 installation. Complete-system flow depends on the Hybrid model, pump, UV dosage requirement, pipework and other system components.
STAGE 3
PX01MP2 Fine Sediment Cartridge
The PX01MP2 is a graded-density polyspun cartridge with a nominal 1 micron filtration rating.
Puretec specifies it for removal of particulate material including dirt, rust, sand, silt and algae.
1 Micron
Fine nominal particulate filtration after the earlier treatment stages.
```
Graded Density
The polyspun structure provides depth filtration throughout the cartridge media.
4.5" × 20"
The PX01MP2 uses the same MaxiPlus physical cartridge format as the other filtration stages in this kit.
```
UV TREATMENT
RL6 46W High Output UV Lamp
The RL6 is the 46W high-output UV lamp specified by Puretec for compatible Hybrid G, R and P Series systems.
Puretec states that the UV treatment process targets bacteria, viruses and other microorganisms by exposing the water to ultraviolet light, disrupting their ability to reproduce.
The effectiveness of UV treatment depends on the complete system operating correctly and on suitable water clarity before the water reaches the UV chamber.
QUARTZ SLEEVE
RQS6 Replacement Quartz Sleeve
The RQS6 surrounds the RL6 lamp within the UV chamber.
It forms a transparent barrier between the electrical lamp and the water while allowing UV light to pass through the quartz.
Scale, dirt or deposits on the quartz surface can interfere with UV transmission, so the sleeve should be inspected during routine servicing and cleaned or replaced as required.
SPECIFICATIONS
Service Kit Component Specifications
| Component |
Type |
Key Specification |
Role |
| PL05MP2 |
Pleated sediment cartridge |
5 micron, 4.5" × 20" |
High-capacity sediment pre-filtration |
| CB05MP2 |
Bonded carbon block |
5 micron, 4.5" × 20", up to 48 L/min |
Chlorine, taste, odour and sediment reduction |
| PX01MP2 |
Polyspun sediment cartridge |
1 micron, 4.5" × 20" |
Fine particulate filtration |
| RL6 |
High-output UV lamp |
46W |
Provides UV energy for the treatment chamber |
| RQS6 |
Quartz sleeve |
Hybrid G/R/P compatible sleeve |
Separates lamp from water while transmitting UV light |
| O-Rings |
Housing seals |
2 supplied |
Sealing during filter-housing reassembly |
| Lubricant |
Food-grade lubricant |
Included |
Applicable O-ring maintenance |
SERVICE INTERVALS
When Should the Hybrid System Be Serviced?
Puretec's Hybrid maintenance guidance specifies regular cartridge changes and annual UV lamp replacement.
Filter Cartridges
Puretec's Hybrid replacement guidance specifies cartridge replacement at approximately 6 month intervals, subject to water quality and system conditions.
```
RL6 UV Lamp
The RL6 should be replaced annually to maintain the intended UV treatment performance.
RQS6 Quartz Sleeve
The sleeve should be inspected regularly, cleaned where required and replaced if damaged or as part of the applicable maintenance program.
```
Actual filtration cartridge life can be shortened by higher sediment loading, water consumption or unusual incoming water conditions.
WHY WATER CLARITY MATTERS
Filtration Comes Before UV Treatment for a Reason
Puretec states that the effectiveness of a UV system depends on the clarity of the water entering the UV chamber.
The filtration cartridges remove particulate material and provide carbon treatment before the water reaches the ultraviolet stage.
If sediment cartridges are overloaded or overdue for servicing, the clarity of the water reaching the UV chamber can be affected.
Replacing only the UV lamp does not replace filtration maintenance.
The cartridges, quartz sleeve and UV lamp each have separate functions and should be maintained according to the requirements of the complete Puretec Hybrid system.
FULL SERVICE PROCESS
What Is Involved in a Hybrid Maintenance Service?
The exact maintenance procedure should follow the instructions for the installed Puretec Hybrid model.
- Confirm the installed system is compatible with HR-G13R11P
- Disconnect electrical power to the UV system
- Isolate the incoming water supply
- Release pressure from the filtration system
- Remove and replace the three filtration cartridges
- Clean accessible filter bowls
- Inspect and service applicable O-rings
- Use supplied lubricant where required
- Allow the UV assembly to cool before servicing
- Replace the RL6 UV lamp
- Inspect or replace the RQS6 quartz sleeve
- Reassemble the filtration and UV components correctly
- Restore water pressure gradually
- Check accessible housings and connections for leaks
- Reconnect power and confirm normal UV controller operation
ELECTRICAL & UV SAFETY
UV Maintenance Requires More Care Than a Standard Filter Change
The HR-G13R11P includes electrical UV components as well as conventional filter cartridges.
The power supply must be isolated before the UV lamp or quartz sleeve is accessed. The UV assembly can also become hot during operation and should be allowed to cool before servicing.
Do not view an operating UV lamp outside the chamber.
Direct exposure to ultraviolet light can be hazardous to eyes and skin. Follow the Puretec service procedure for the installed Hybrid system.
O-RINGS & HOUSINGS
Why the Kit Includes O-Rings & Lubricant
The three large filter housings rely on correctly seated seals to remain watertight after servicing.
The HR-G13R11P therefore includes two replacement O-rings and food-grade lubricant for applicable seal maintenance.
Accessible seals and sealing surfaces should be checked during servicing. Damaged housings, valves, threads or plumbing components may require separate repair rather than simply replacing the cartridges.
BEFORE ORDERING
Confirm the Kit Matches Your Hybrid System
- System is a compatible Hybrid P Series model
- Or system is a Puretec Hybrid G13
- Or system is a Puretec Hybrid R11
- Stage 1 cartridge is PL05MP2
- Stage 2 cartridge is CB05MP2
- Stage 3 cartridge is PX01MP2
- UV lamp is RL6
- Quartz sleeve is RQS6
If the installed Hybrid system uses a different cartridge combination, choose the maintenance kit specifically listed by Puretec for that model.
SUPPLY OR SERVICE
Choose How You Want to Maintain Your Puretec Hybrid System
Supply Only
Order the genuine Puretec maintenance kit where you already have a suitable servicing arrangement for your Hybrid system.
```
Complete Genuine Kit
The manufacturer-specified cartridges, lamp, quartz sleeve, O-rings and lubricant are supplied together under one Puretec kit model.
Professional Service Option
Professional servicing may be available in eligible Installed Today service areas where the Puretec Hybrid installation is accessible and in serviceable condition.
```
PROFESSIONAL MAINTENANCE
Professional Hybrid Filter & UV Servicing
A professional maintenance service can include replacement of the supplied filtration cartridges, inspection and cleaning of accessible housings, service of applicable seals, replacement of the RL6 lamp and servicing of the RQS6 quartz sleeve.
The filtration system can then be reassembled, repressurised and checked for accessible leaks and normal operation.
Repairs to pumps, controllers, electrical components, filter housings, valves, pipework or other damaged parts are separate where additional work is required.
COMMON QUESTIONS
Questions About the Puretec HR-G13R11P Maintenance Kit
What Systems Does the HR-G13R11P Suit?
Puretec specifies it for all Hybrid P Series systems plus compatible Hybrid G13 and R11 systems.
Which Filter Cartridges Are Included?
The kit contains one PL05MP2 pleated sediment cartridge, one CB05MP2 carbon block cartridge and one PX01MP2 polyspun sediment cartridge.
Is an RL6 UV Lamp Included?
Yes. The kit includes the genuine Puretec RL6 46W high-output UV lamp.
Is the RQS6 a Filter Cartridge?
No. The RQS6 is the replacement quartz sleeve surrounding the UV lamp inside the treatment chamber.
Are O-Rings Included?
Yes. Puretec lists two O-rings as part of the HR-G13R11P maintenance kit.
Is Lubricant Included?
Yes. Food-grade lubricant is included for applicable seal maintenance.
What Is the PL05MP2?
It is a washable 5 micron, 4.5" × 20" pleated sediment cartridge used as the first filtration stage.
What Is the CB05MP2?
It is a 5 micron bonded activated carbon block cartridge designed to significantly reduce chlorine, unwanted taste, odour and sediment.
What Is the PX01MP2?
It is a 1 micron graded polyspun sediment cartridge designed to capture fine particulate material including dirt, rust, sand, silt and algae.
How Often Should the Filter Cartridges Be Changed?
Puretec's Hybrid maintenance guidance specifies cartridge replacement at approximately 6 month intervals, with actual service requirements influenced by water quality and use.
How Often Should the RL6 Lamp Be Replaced?
Puretec specifies annual replacement of the applicable UV lamp.
Does the Quartz Sleeve Need Routine Attention?
Yes. The RQS6 should be inspected for dirt, scale and damage during maintenance and cleaned or replaced as required.
Is 48 L/min the Flow Rate of Every Compatible Hybrid System?
No. The 48 L/min figure is the listed flow rating of the CB05MP2 cartridge. Complete Hybrid system flow depends on the specific model and its pump, UV and plumbing specifications.
Can I Service the System Myself?
Filter and UV servicing requires correct water isolation, electrical isolation, pressure release and careful handling of the lamp and quartz sleeve. Use professional servicing where you are not equipped to complete those procedures safely and correctly.
Can Installed Today Service the System?
Professional Puretec Hybrid servicing may be available in eligible service areas where the system is accessible and in serviceable condition.
WHY INSTALLED TODAY
Order the Complete Puretec Hybrid Maintenance Kit
Correct Manufacturer Kit
The HR-G13R11P combines the exact maintenance components Puretec specifies for compatible Hybrid P, G13 and R11 systems.
```
Supply Only Available
Purchase the complete maintenance kit where you already have an established servicing arrangement.
Installation-Capable Retailer
Professional servicing may also be available in eligible Installed Today service areas if you prefer the maintenance components fitted for you.
```
FINAL CHECK
Is the Puretec HR-G13R11P the Correct Service Kit?
The Puretec HR-G13R11P Maintenance Kit is the genuine manufacturer kit designed for all Hybrid P Series systems plus Hybrid G13 and R11.
It includes the PL05MP2 5 micron pleated sediment cartridge, CB05MP2 5 micron carbon block cartridge, PX01MP2 1 micron polyspun cartridge, RL6 46W UV lamp, RQS6 quartz sleeve, food-grade lubricant and two O-rings.
Before ordering, confirm that your installed Hybrid system uses this exact cartridge and UV-component combination. Follow the applicable Puretec service schedule, isolate both water and electrical power before UV maintenance and check the complete system for leaks and normal operation after servicing.
