The Puretec PureMix Z6 is a high-flow inline under-sink filtration system designed specifically for mains water. It connects to a compatible existing two-way kitchen mixer so filtered cold water can be supplied without installing a separate drinking-water tap. :contentReference[oaicite:0]{index=0}
The current PUREMIX-Z6-LF uses Puretec's Z6-R quick-twist cartridge with Ultra Z filtration technology, a nominal 0.1 micron rating, a manufacturer-listed flow rate of 9.5 L/min and capacity of 60,000 litres. :contentReference[oaicite:1]{index=1}
Puretec lists the system for reduction of sediment, chlorine, unwanted taste and odour, filterable cysts and bacteria including E. coli, while the current user guide still requires appropriate source-water quality and warns against use on microbiologically unsafe or unknown water without adequate disinfection. :contentReference[oaicite:2]{index=2}
Puretec states the micron rating is nominal. Practical cartridge life depends on water quality, usage and the applicable service interval. :contentReference[oaicite:4]{index=4}
The PureMix Z6 uses one replaceable cartridge containing three filtration functions rather than three separate filter housings.
Filters sediment, dirt and other suspended particles down to a nominal 0.1 micron.
Reduces chlorine together with unwanted taste and odour from compatible mains-water supplies.
Puretec lists protection against filterable cysts and bacteria such as E. coli through its Ultra Z filtration technology.
The PureMix Z6 is designed to connect to an existing compatible two-way mixer tap on the cold-water supply.
This means a separate filtered-water faucet is not required in the standard PureMix installation, which can be useful where an additional tap hole is not wanted.
Puretec allows the filter assembly to be mounted vertically or horizontally beneath the sink, helping it fit around existing cabinet storage and pipework. :contentReference[oaicite:6]{index=6}
Puretec lists the Z6-R with a nominal filtration rating of 0.1 micron.
The manufacturer currently lists treatment including:
Puretec markets the Z6 as providing protection against bacteria such as E. coli and filterable cysts through its Ultra Z filtration technology. :contentReference[oaicite:8]{index=8}
The current Puretec user guide states that the PureMix Z6 is designed to operate with mains water.
Puretec separately identifies the Z7 for mains, rain, harsh and rural supplies. The Z6 should therefore not automatically be marketed as a rainwater or rural-water filter simply because another PureMix model supports those applications. :contentReference[oaicite:10]{index=10}
Puretec currently lists the PureMix Z6 at 9.5 L/min.
Actual flow at the mixer can still vary according to incoming pressure, tap design, plumbing, fittings and cartridge condition.
Puretec currently lists the PureMix Z6 with a capacity of 60,000 litres. :contentReference[oaicite:12]{index=12}
The current Z6/Z7 user guide states that this capacity is based on inlet chlorine of approximately 2 ppm ±10%. Water quality and treatment demand can shorten practical cartridge life. :contentReference[oaicite:13]{index=13}
Puretec requires an approved pressure limiting device where line pressure exceeds 500 kPa and specifies protection from freezing. :contentReference[oaicite:15]{index=15}
The PureMix Z6 uses a 1/2" BSP / 15 mm connection and is installed on the cold-water line supplying the kitchen mixer.
Puretec's current user guide states that the installation kit is designed to connect to a 15 mm male-thread arrangement and includes an extension kit where extra hose length is required. :contentReference[oaicite:16]{index=16}
Puretec allows the Z Series filter to be mounted either vertically or horizontally.
The current user guide specifies a minimum of approximately 70 mm cartridge-change clearance and advises leaving additional free space around the system so stored items cannot accidentally knock the cartridge out of its locked position. :contentReference[oaicite:17]{index=17}
| Specification | Puretec PureMix Z6 |
|---|---|
| Current Model | PUREMIX-Z6-LF |
| Application | Under-sink mains-water filtration |
| Replacement Cartridge | Z6-R |
| Filtration | 3-level Ultra Z filtration |
| Nominal Micron Rating | 0.1 micron |
| Flow Rate | 9.5 L/min |
| Capacity | 60,000 litres |
| Operating Pressure | 200–520 kPa |
| Pressure Limiting | Approved device required where line pressure exceeds 500 kPa |
| Operating Temperature | 0–38°C; protect from freezing |
| Connection | 1/2" BSP / 15 mm |
| Water Source | Mains water |
| Mounting | Horizontal or vertical |
| Electrical Power | Not required |
| Filtration Drain | Not required |
| WaterMark | AS 3497, Licence No. WM 74617 |
| Warranty | 10 years – 1 year parts and labour plus 9 years parts only, excluding cartridge and subject to conditions |
Puretec's current Z6/Z7 user guide identifies the PureMix system with WaterMark AS 3497, Licence No. WM 74617. :contentReference[oaicite:19]{index=19}
The Z6-R uses Puretec's valve-in-head quick-twist format. The cartridge is removed with approximately a quarter-turn and the replacement cartridge locks into the head by rotating it back into position.
The head and cartridge alignment arrows should line up when the cartridge is correctly seated. :contentReference[oaicite:20]{index=20}
Puretec's current model-specific Z6/Z7 user guide instructs users to replace the Z6-R at least every 60,000 litres or 6 months, whichever occurs first.
Replacement should also occur sooner if there is a noticeable change in taste, odour or flow. Varying chlorine, sediment and organic-substance levels can affect service life. :contentReference[oaicite:22]{index=22}
General Puretec cartridge pages sometimes refer to 6–12 month replacement periods, but the current Z6-specific user guide provides the more specific 6-month / 60,000-litre instruction for this model. :contentReference[oaicite:23]{index=23}
Puretec instructs installers to run the system for at least 10 minutes after initial installation.
After a Z6-R change, Puretec specifies flushing for approximately 5 minutes or until the water runs clear.
Puretec instructs users to flush the system for 10 minutes after a period of non-use longer than two days.
The current Puretec Z6/Z7 user guide states that installation must be completed by a licensed plumber and warns that faulty operation resulting from unqualified installation can affect warranty coverage. :contentReference[oaicite:26]{index=26}
The PureMix Z6 does not require electrical power to operate and does not produce a reject-water stream like reverse osmosis.
Puretec's current user guide confirms there are no electrical or drainage requirements for normal filtration operation. :contentReference[oaicite:27]{index=27}
| Feature | PureMix Z6 | PureMix Z7 |
|---|---|---|
| Nominal Rating | 0.1 micron | 1 micron |
| Water Source | Mains water | Mains, rain, harsh and rural water |
| Listed Flow | 9.5 L/min | 9.5 L/min |
| Primary Positioning | Low-sediment mains water with Ultra Z bacterial filtration | Higher-sediment or harsher water conditions |
| E. coli | Puretec specifically lists Z6 protection against bacteria including E. coli | Puretec states Z7 may not suit E. coli concerns |
Puretec currently lists the PureMix Z6 with a 10-year warranty.
Puretec specifies use of the genuine Z6-R replacement cartridge to maintain applicable performance standards and warranty conditions.
Order the Puretec PureMix Z6 for delivery to supported Australian locations where you already have a suitable licensed installer.
The genuine Puretec Z6-R is the manufacturer-listed replacement cartridge for ongoing servicing.
Professional under-sink installation may be available in eligible Brisbane and Gold Coast service areas, subject to mixer compatibility, plumbing, pressure and cabinet access.
Puretec currently lists the system as PUREMIX-Z6-LF. :contentReference[oaicite:30]{index=30}
The PureMix Z6 uses the genuine Puretec Z6-R quick-twist cartridge. :contentReference[oaicite:31]{index=31}
The Z6 has a nominal filtration rating of 0.1 micron. :contentReference[oaicite:32]{index=32}
Puretec lists the system at 9.5 litres per minute. :contentReference[oaicite:33]{index=33}
Puretec currently lists 60,000 litres. The specific user guide also requires cartridge replacement at 60,000 litres or 6 months, whichever occurs first. :contentReference[oaicite:34]{index=34}
Puretec currently lists the Z6 as providing protection against bacteria such as E. coli through Ultra Z filtration technology. Its user guide still requires suitable mains water and adequate disinfection where water is microbiologically unsafe or of unknown quality. :contentReference[oaicite:35]{index=35}
Yes. Puretec lists Giardia and Cryptosporidium cyst filtration among the current Z6 treatment functions. :contentReference[oaicite:36]{index=36}
The current Puretec user guide specifies the Z6 for mains water. Puretec separately identifies the Z7 for mains, rain, harsh and rural supplies. :contentReference[oaicite:37]{index=37}
No. Puretec designed the Z6 to connect to a compatible existing two-way mixer tap. :contentReference[oaicite:38]{index=38}
Yes. Puretec permits both horizontal and vertical mounting. :contentReference[oaicite:39]{index=39}
Puretec lists an operating range of 200–520 kPa. An approved pressure limiting device is required where line pressure exceeds 500 kPa. :contentReference[oaicite:40]{index=40}
No. The PureMix Z6 does not require electrical power for filtration. :contentReference[oaicite:41]{index=41}
No filtration waste-water drain is required. The current user guide states there are no drainage requirements for normal operation. :contentReference[oaicite:42]{index=42}
Puretec's current Z6-specific guide states 60,000 litres or 6 months, whichever occurs first, or sooner where taste, odour or flow changes indicate servicing is needed. :contentReference[oaicite:43]{index=43}
Puretec's current user guide states that installation must be completed by a licensed plumber. :contentReference[oaicite:44]{index=44}
Puretec lists a 10-year warranty consisting of 1 year parts and labour plus 9 years parts only. The cartridge is excluded and warranty conditions apply. :contentReference[oaicite:45]{index=45}
Purchase the PureMix Z6 without installation where you already have a suitable licensed plumbing arrangement.
The system is matched to Puretec's manufacturer-listed Z6-R quick-twist cartridge rather than a generic inline filter.
Installed Today can also support eligible local installations where the mixer, cold-water plumbing, pressure and cabinet access are suitable.
The Puretec PureMix Z6 is designed for mains-water kitchens where fine under-sink filtration is wanted through an existing compatible two-way mixer without adding a separate filtered-water tap.
The current PUREMIX-Z6-LF uses the Z6-R, filters to a nominal 0.1 micron, provides a listed 9.5 L/min flow rate and has a manufacturer-listed capacity of 60,000 litres. Puretec lists treatment including chlorine, sediment, unwanted taste and odour, Giardia, Cryptosporidium and bacteria including E. coli. :contentReference[oaicite:46]{index=46}
Before ordering, confirm the property uses mains water, check the existing mixer and 15 mm cold-water connection, verify the 200–520 kPa operating pressure range and allow enough cabinet space for horizontal or vertical mounting and future cartridge removal. Puretec's current user guide requires licensed-plumber installation and replacement of the Z6-R at least every 60,000 litres or 6 months, whichever occurs first. :contentReference[oaicite:47]{index=47}
Buying a new hot water system, water filter, pump or plumbing product should be simple. Installed Today helps you compare the product, the supply-only price and the available installation options in one place, so you can choose what suits your home, budget and timing without the back and forth.
Whether you already know exactly what you need or you are still comparing options, we make it easier to order with confidence.
Choose the product on its own, or add installation where available. This gives you the flexibility to buy the way that suits you best.
See your product price upfront, then add the installation options or common extras you need before placing your order. No confusing quote forms just to understand your starting price.
Key specs, sizing details, warranty information, product features and suitability notes are shown clearly, so you can compare products properly before you buy.
Where relevant, you can add common installation extras such as valve kits, bases, electrical options, removal, access-related items or other site-specific upgrades before checkout.
Our product and installation options are selected with common local homes, water quality, plumbing layouts, access issues and replacement requirements in mind.
Add the product and selected extras to cart in one order, instead of trying to organise separate suppliers, installers and parts.
Not sure which product, size or installation option is right? Installed Today gives you a clearer path to choosing the right system before you order.
Installed Today is built for customers who want a faster, clearer and more convenient way to buy.
Instead of guessing what is included, waiting for basic pricing or trying to work out which extras are needed, you can review the product, compare your options and move forward with confidence.
Choose supply only if you just need the product.
Choose supplied and installed if you want the product installed where available.
Add common extras before checkout if your job needs additional parts or site-specific options.
It is a simpler way to organise the product and the parts of the job that matter most.
Installation availability, inclusions and add-ons vary by product type, site access, existing services, selected options and your property requirements. Some installations may require additional work, upgrades or checks before the job can proceed.
Same Day Delivery: Available in Brisbane and Gold Coast on select units ordered before 8:00am
Express Delivery: 1–4 business days
Standard Delivery: 2–8 business days
Same day delivery is available for selected hot water systems in Brisbane and Gold Coast metro areas when ordered before 8:00am, subject to stock availability, delivery capacity and suitable transport conditions.
Most hot water orders in metro areas are delivered quickly, with around 90% arriving within 1 business day.
Hot water systems cannot always be transported safely by courier during rain. Delivery timeframes may be affected when wet weather impacts safe handling, loading, unloading or transport conditions.
If your express delivery order takes longer than 1–4 business days, we will adjust the delivery timeframe to our standard 2–8 business days and refund your express shipping charge automatically.
We will send your delivery details as soon as your order has been dispatched.
Need help with your delivery? Contact our team and we’ll be happy to assist.
Helpful Installed Today guides covering whole home water filtration, drinking water filters, under-sink systems, reverse osmosis, Puretec filters and water quality.
