The Installed Today Twin 20 Enclosed UV Whole Home Water Filter System combines two large-format 20-inch cartridge stages with downstream ultraviolet treatment in an enclosed whole-house configuration.
The listed treatment sequence uses a sediment cartridge followed by a carbon block cartridge, with the UV system positioned after filtration. This arrangement allows each stage to perform a separate job rather than relying on one cartridge for every treatment requirement.
The system is intended for point-of-entry installation, treating the incoming water supply before it is distributed through applicable household plumbing.
The first cartridge is designed to reduce suspended dirt, rust, sand, silt and other particulate material before water reaches the downstream stages.
The second stage uses carbon media for treatment of chlorine and unwanted taste or odour where the supplied cartridge is specified for those functions.
Filtered water then passes through a separate ultraviolet chamber as the final treatment stage before entering the household water supply.
The Twin 20 configuration is intended to be installed on the incoming water line rather than beneath one sink.
This allows the filtration stages and UV unit to operate as a central treatment system for applicable taps, showers and connected appliances downstream of the installation point.
Actual performance still depends on correct system sizing, cartridge selection, water pressure, source-water conditions and the validated operating range of the UV equipment.
The first cartridge stage provides mechanical filtration of suspended particulate material.
Captures suspended dirt before it reaches downstream treatment equipment.
Helps reduce particulate rust carried through the incoming water supply.
Designed to reduce suspended sand, silt and similar particulate material.
Reduces particulate loading on the carbon cartridge and UV treatment stage.
The sediment cartridge is a serviceable consumable and requires periodic replacement.
The exact micron rating should be confirmed against the sediment cartridge supplied with the system.
The second cartridge stage uses carbon block filtration.
Where the supplied cartridge is specified for these functions, activated carbon can provide treatment for chlorine, unwanted taste and odour while also contributing to particulate filtration.
Carbon treatment can reduce chlorine in suitable chlorinated water supplies within the cartridge's rated capacity.
Activated carbon is commonly used to improve water affected by unwanted taste.
The carbon stage can also provide unwanted odour reduction where specified.
The UV stage is positioned after the sediment and carbon cartridges so the water entering the UV chamber has already passed through the two mechanical filtration stages.
UV equipment depends on suitably clear water, correct flow, the required UV dose, lamp condition and a clean quartz sleeve.
The system is supplied as an enclosed whole-home filtration package rather than as two loose filter housings and a separate unmounted UV unit.
The listed configuration includes a stainless steel cover, supporting frame or stand, pressure gauges and brass connection points as part of the assembled system design.
Exact enclosure material grade, pressure-gauge specification, port size and environmental installation rating should be confirmed against the final hardware supplied.
The supplied configuration is described with dual pressure gauges.
Pressure gauges can assist with monitoring the system before and after filtration, making it easier to identify when cartridge loading may be contributing to increased pressure drop.
Pressure readings should be interpreted alongside normal system flow, available incoming pressure and the operating specifications of the installed housings and UV equipment.
Sediment filtration followed by UV treatment can form part of a rainwater treatment arrangement where the system is correctly sized for the source-water conditions.
Carbon treatment can be relevant where chlorine, unwanted taste or odour are treatment priorities, subject to the specification of the supplied cartridge.
Bore water can contain dissolved iron, manganese, hardness, salinity or other issues requiring testing and treatment beyond standard sediment, carbon and UV stages.
A sediment cartridge, carbon cartridge and UV unit each perform specific treatment functions.
| Specification | System Detail |
|---|---|
| Product Type | Whole-home point-of-entry filtration system |
| Cartridge Configuration | Twin 20-inch large-format filtration |
| Stage 1 | Sediment filtration |
| Stage 2 | Carbon block filtration |
| Final Treatment | Ultraviolet treatment |
| Enclosure | Enclosed configuration with stainless steel cover listed |
| Pressure Monitoring | Dual pressure gauges listed |
| Connection Hardware | Brass ports listed; exact size to be confirmed |
| Sediment Micron Rating | Confirm against cartridge supplied |
| Carbon Media Specification | Confirm against cartridge supplied |
| UV Flow / Dose | Confirm against exact UV unit supplied |
| Electrical Supply | Required for UV operation |
The correct system flow cannot be determined from the 20-inch housing size alone.
Practical flow is influenced by the sediment cartridge, carbon cartridge, UV chamber, pipework, fittings, incoming pressure and the UV dose required for the application.
The original product copy describes an enclosed design intended to provide additional protection to the filtration equipment.
However, direct-sunlight resistance, weather exposure, ingress protection and outdoor electrical requirements depend on the exact housings, enclosure and UV controller supplied.
The Twin 20 Enclosed UV is not maintenance-free.
Replace according to sediment loading, water use and the service interval of the exact cartridge supplied.
Carbon life depends on incoming water conditions, treatment demand, cartridge capacity and water consumption.
Replace according to the interval specified for the exact UV unit rather than waiting for the lamp to stop illuminating.
Inspect and clean as required so deposits do not obstruct UV transmission.
Inspect O-rings and sealing surfaces whenever the filter housings are opened.
Monitor changes in pressure and flow that may indicate increasing cartridge restriction.
UV servicing involves both pressurised plumbing and electrical equipment.
UV lamps and quartz sleeves are glass components and should be handled carefully. An operating UV lamp should not be viewed directly outside its protective chamber.
The supplied product description identifies the Twin 20 system as an enclosed sediment, carbon and UV filtration package.
Before ordering, confirm the final package includes the components you expect:
Order the Twin 20 Enclosed UV system for delivery to supported Australian locations where you already have a suitable installer.
Check cartridge specifications, UV capacity, flow requirements and connection details before installation.
Professional installation may be available in eligible Brisbane and Gold Coast service areas, subject to site access and installation requirements.
It refers to two large-format 20-inch filtration housings used as separate cartridge stages.
Yes. It is designed for point-of-entry installation before water is distributed through applicable household plumbing.
The first stage is a sediment cartridge for suspended particulate material.
The second stage is a carbon block cartridge for applicable chlorine, unwanted taste and odour treatment.
Yes. A separate ultraviolet treatment stage is positioned after the cartridge filtration.
No. Sediment filtration, carbon filtration and UV treatment perform different functions.
Not automatically. Heavy-metal treatment requires a cartridge or media specifically rated for that purpose.
No dedicated scale-control stage is identified in this Twin 20 configuration. Scale treatment would require an appropriate additional or alternative treatment stage.
The exact microbiological performance claim depends on the UV model, validated dose, water clarity and operating flow. Confirm the specification of the supplied UV unit.
Confirm the exact sediment cartridge supplied with the system rather than assuming a fixed micron rating.
Service life depends on the exact cartridges, water quality and usage. Follow the replacement interval specified for the supplied filters.
Follow the lamp interval specified by the manufacturer of the UV unit supplied with the system.
Yes. It should be inspected and cleaned according to the UV manufacturer's maintenance instructions.
Only where the supplied enclosure, filter housings, UV controller and electrical installation are suitable for the intended environmental exposure.
Professional installation may be available in eligible Brisbane and Gold Coast service areas, subject to plumbing access, electrical provision and site requirements.
Yes. The cartridge filtration stages do not require power, but the UV system requires a suitable electrical supply.
Purchase the filtration system without installation where you already have a suitable installer or maintenance arrangement.
The system is presented as separate sediment, carbon and UV stages without relying on unsupported universal purification claims.
Installed Today can also support eligible local installations where the site's plumbing, system sizing, access and electrical requirements are suitable.
The Installed Today Twin 20 Enclosed UV Whole Home Water Filter System combines two large 20-inch filtration stages with downstream ultraviolet treatment.
The listed treatment sequence uses sediment filtration followed by carbon block filtration and UV. The enclosed configuration is also described with a stainless steel cover, supporting stand, pressure gauges and brass connection points.
Before ordering, confirm the exact sediment cartridge, carbon cartridge, UV model, validated UV flow, connection sizes, pressure requirements and environmental installation rating of the supplied system. These details determine whether the system is correctly sized for the property and how it should be maintained over time.
Buying a new hot water system, water filter, pump or plumbing product should be simple. Installed Today helps you compare the product, the supply-only price and the available installation options in one place, so you can choose what suits your home, budget and timing without the back and forth.
Whether you already know exactly what you need or you are still comparing options, we make it easier to order with confidence.
Choose the product on its own, or add installation where available. This gives you the flexibility to buy the way that suits you best.
See your product price upfront, then add the installation options or common extras you need before placing your order. No confusing quote forms just to understand your starting price.
Key specs, sizing details, warranty information, product features and suitability notes are shown clearly, so you can compare products properly before you buy.
Where relevant, you can add common installation extras such as valve kits, bases, electrical options, removal, access-related items or other site-specific upgrades before checkout.
Our product and installation options are selected with common local homes, water quality, plumbing layouts, access issues and replacement requirements in mind.
Add the product and selected extras to cart in one order, instead of trying to organise separate suppliers, installers and parts.
Not sure which product, size or installation option is right? Installed Today gives you a clearer path to choosing the right system before you order.
Installed Today is built for customers who want a faster, clearer and more convenient way to buy.
Instead of guessing what is included, waiting for basic pricing or trying to work out which extras are needed, you can review the product, compare your options and move forward with confidence.
Choose supply only if you just need the product.
Choose supplied and installed if you want the product installed where available.
Add common extras before checkout if your job needs additional parts or site-specific options.
It is a simpler way to organise the product and the parts of the job that matter most.
Installation availability, inclusions and add-ons vary by product type, site access, existing services, selected options and your property requirements. Some installations may require additional work, upgrades or checks before the job can proceed.
Same Day Delivery: Available in Brisbane and Gold Coast on select units ordered before 8:00am
Express Delivery: 1–4 business days
Standard Delivery: 2–8 business days
Same day delivery is available for selected hot water systems in Brisbane and Gold Coast metro areas when ordered before 8:00am, subject to stock availability, delivery capacity and suitable transport conditions.
Most hot water orders in metro areas are delivered quickly, with around 90% arriving within 1 business day.
Hot water systems cannot always be transported safely by courier during rain. Delivery timeframes may be affected when wet weather impacts safe handling, loading, unloading or transport conditions.
If your express delivery order takes longer than 1–4 business days, we will adjust the delivery timeframe to our standard 2–8 business days and refund your express shipping charge automatically.
We will send your delivery details as soon as your order has been dispatched.
Need help with your delivery? Contact our team and we’ll be happy to assist.
Helpful Installed Today guides covering whole home water filtration, drinking water filters, under-sink systems, reverse osmosis, Puretec filters and water quality.
