PURETEC MAXIPLUS SEDIMENT CARTRIDGE
Puretec PX01MP2 1 Micron MaxiPlus Sediment Cartridge
The Puretec PX01MP2 is a genuine high-flow sediment replacement cartridge designed to reduce dirt, rust, sand, silt, algae and other suspended particles from compatible water filtration systems.
It uses Puretec's graded-density polyspun construction with a nominal 1 micron filtration rating, making it suitable where fine sediment filtration is required as part of a larger whole-house, rainwater or UV treatment system.
The PX01MP2 is a large MaxiPlus 4.5" × 20" cartridge with a manufacturer-listed individual flow rate of up to 152 litres per minute.
Quick answer:
the Puretec PX01MP2 is a 1 micron, 4.5" × 20" MaxiPlus polyspun sediment cartridge. Puretec lists the individual cartridge at up to 152 L/min. It is used in compatible systems including current Hybrid E13 and Hybrid I13 configurations, EM2-140 and EM2-150 whole-house filters, and other Puretec systems specifically calling for PX01MP2.
PRODUCT AT A GLANCE
Puretec PX01MP2 Key Details
1 Micron
Nominal Rating
```
4.5" × 20"
MaxiPlus Size
152 L/min
Listed Cartridge Flow
Polyspun
Virgin Polypropylene
```
IMPORTANT CORRECTION
The PX01MP2 Is a Large 20-Inch MaxiPlus Cartridge
The PX01MP2 should not be described as a standard 10" × 2.5" cartridge.
Puretec's current specification identifies it as a 4.5" × 20" MaxiPlus cartridge, making it substantially larger than standard slimline 10-inch sediment filters.
Check both the model number and physical cartridge size before ordering.
PX01MP2 is intended for compatible 20-inch MaxiPlus housings and systems. It will not replace a standard 2.5" × 10" PX011 or a 4.5" × 10" PX01MP1.
WHAT IT DOES
What Does the PX01MP2 Filter?
Dirt
The graded polypropylene media captures suspended dirt particles carried through the water supply.
```
Rust
Designed to reduce particulate rust before water moves to downstream filtration or treatment stages.
Sand & Silt
The depth-filtration structure is effective for fine suspended sand and silt.
Algae
Puretec also lists algae among the particulate material targeted by its PX sediment cartridge range.
Fine Sediment
The nominal 1 micron rating makes the PX01MP2 the fine-filtration option within the 20-inch MaxiPlus PX range.
Physical Filtration
The cartridge removes suspended material physically rather than through carbon adsorption or chemical treatment.
```
GRADED DEPTH FILTRATION
How the PX01MP2 Polyspun Media Works
Puretec manufactures its PX Series from virgin polypropylene that is spun and melted simultaneously to create a graded-density filtration structure.
Rather than trapping particles only on the outside surface, the cartridge captures particulate material throughout the depth of the media.
Puretec also designs the PX Series without a conventional centre core, allowing the internal cartridge volume to be used for filtration media.
SEDIMENT ONLY
What the PX01MP2 Does Not Treat
The PX01MP2 is a sediment cartridge. It does not contain activated carbon, UV technology or specialist chemical-treatment media.
- Fine particulate and sediment reduction
- Dirt, rust, sand and silt reduction
- Suitable as one stage within compatible multi-stage systems
- High-flow MaxiPlus cartridge format
PX01MP2 does not provide chlorine, taste or odour treatment by itself.
Compatible Puretec systems may use a separate carbon stage where those treatment functions are required.
SPECIFICATIONS
Puretec PX01MP2 Technical Specifications
| Specification |
Puretec PX01MP2 |
| Model |
PX01MP2 |
| Product Type |
Graded polyspun sediment cartridge |
| Series |
Puretec PX Series |
| Nominal Micron Rating |
1 micron |
| Cartridge Format |
MaxiPlus |
| Cartridge Size |
4.5" × 20" |
| Listed Cartridge Flow |
152 L/min |
| Filter Material |
Virgin polypropylene |
| Construction |
Graded-density depth filtration |
| Primary Treatment |
Dirt, rust, sand, silt, algae and suspended sediment |
FLOW RATE
152 L/min Is the Cartridge Rating, Not Every System's Flow
Puretec lists the individual PX01MP2 cartridge at up to 152 L/min.
This does not mean every filtration system using the cartridge will deliver 152 L/min. Complete-system flow can be limited by housings, pipework, other cartridges, UV equipment, pumps, incoming pressure and other components.
PX01MP2
Individual cartridge specification: up to 152 L/min.
```
Hybrid E13
Puretec lists the complete current system at a maximum flow rate of 120 L/min.
EM2-150
Puretec lists the complete EM2-150 filtration system at up to 150 L/min.
```
HYBRID COMPATIBILITY
PX01MP2 in Puretec Hybrid Systems
The PX01MP2 is used as a fine sediment stage in several compatible Puretec Hybrid rainwater-treatment systems.
Puretec currently specifies PX01MP2 in systems including the Hybrid E13, Hybrid E13AMC and Hybrid I13, where it forms the fine 1 micron sediment stage within a larger treatment arrangement.
Hybrid E13
Uses PL05MP2, CB05MP2 and PX01MP2 together with UV treatment.
```
Hybrid E13AMC
Uses the same three replacement cartridge types within the enclosed AMC system configuration.
Hybrid I13
Puretec also specifies PX01MP2 as the fine sediment cartridge in the current indoor Hybrid I13.
```
EM SERIES COMPATIBILITY
PX01MP2 in Puretec EM2-140 & EM2-150 Systems
Puretec currently specifies the PX01MP2 as the second filtration stage in the EM2-140 and EM2-150 whole-house filtration systems.
Stage 1 – PL20MP2
A washable 20 micron pleated sediment cartridge provides the first coarse sediment stage.
```
Stage 2 – PX01MP2
The 1 micron polyspun cartridge provides the finer second sediment stage.
```
The EM2-140 and EM2-150 are complete filtration systems with their own flow, pressure and connection specifications. The PX01MP2's 152 L/min rating should not be substituted for those system specifications.
OTHER COMPATIBLE PURETEC SYSTEMS
Check the Exact Replacement Guide
Puretec has also specified the PX01MP2 across compatible Hybrid G, Hybrid R and HybridPlus configurations, including systems where it functions as the final fine sediment stage before UV treatment.
Because Puretec's product range has changed over time, the safest way to identify compatibility is to check the model number on the installed system and match it against the applicable Puretec replacement guide.
Do not treat PX01MP2 as a universal 20-inch cartridge.
A housing may physically accept a 4.5" × 20" filter but still require a different micron rating or filtration media for the system to operate as specified.
PX01MP2 VS PX05MP2
1 Micron vs 5 Micron MaxiPlus Sediment Filtration
| Feature |
PX01MP2 |
PX05MP2 |
| Nominal Rating |
1 micron |
5 micron |
| Size |
4.5" × 20" |
4.5" × 20" |
| Media |
Graded polyspun polypropylene |
Graded polyspun polypropylene |
| Listed Flow |
152 L/min |
156 L/min |
| Filtration Focus |
Finer 1 micron sediment filtration |
5 micron sediment filtration |
Choose the cartridge code specified for the installed Puretec system rather than substituting based only on physical size.
PX01MP2 VS PX01MP1
20-Inch vs 10-Inch MaxiPlus
| Feature |
PX01MP2 |
PX01MP1 |
| Micron Rating |
1 micron |
1 micron |
| Diameter |
4.5" |
4.5" |
| Length |
20" |
10" |
| Listed Flow |
152 L/min |
75 L/min |
PX01MP1 and PX01MP2 are not interchangeable.
They share the same nominal micron rating and diameter but differ substantially in cartridge length.
WHEN TO REPLACE
How Often Should the PX01MP2 Be Replaced?
The appropriate replacement interval depends on the complete system and incoming water conditions.
Puretec's current Hybrid E guidance generally specifies cartridge replacement every 6–12 months. Puretec's EM maintenance guidance also specifies approximately 6–12 months, with actual timing dependent on water quality and usage.
Some earlier Hybrid configurations specify a six-month cartridge service interval, so the maintenance guide for the exact installed system should always take priority.
- Applicable system service interval has been reached
- Water flow has noticeably decreased
- Fine sediment loading is increasing
- Cartridge is visibly heavily loaded
- Water conditions have changed
- Previous replacement date is unknown
WHY SERVICE LIFE VARIES
What Affects PX01MP2 Cartridge Life?
Sediment Loading
Water containing more fine dirt, silt or suspended particles can load a 1 micron cartridge more quickly.
```
Total Water Use
Whole-house applications can pass substantial volumes of water through the cartridge over the service period.
Pre-Filtration
Compatible systems often use a coarser upstream cartridge to capture larger sediment before water reaches the PX01MP2.
```
CARTRIDGE REPLACEMENT
What Is Involved in Replacing a PX01MP2?
The PX01MP2 is a conventional drop-in cartridge installed inside a compatible reusable 20-inch MaxiPlus housing.
- Confirm the system specifies PX01MP2
- Isolate the incoming water supply
- Relieve pressure through a downstream tap or applicable pressure-relief control
- Open the correct 20-inch MaxiPlus filter housing
- Remove the used cartridge
- Clean the filter bowl with soap and warm water where instructed
- Rinse the housing thoroughly
- Inspect the housing O-ring and sealing surfaces
- Apply suitable food-grade lubricant where required
- Install the new PX01MP2 correctly over the housing spigot
- Reassemble the filter bowl without overtightening
- Restore the water supply gradually
- Check the complete housing for leaks
- Flush or recommission the complete system according to its Puretec guide
O-RING MAINTENANCE
Inspect the Housing Seal During Servicing
Puretec's whole-house maintenance guidance recommends checking the housing O-ring each time the cartridge is changed.
If the seal is damaged, kinked or deteriorated it should be replaced. Puretec's general whole-house guidance recommends O-ring replacement approximately every 3–5 years to help maintain a watertight housing seal.
Only suitable food-grade silicone lubricant should be used where lubrication is required.
BEFORE ORDERING
Check These Details First
- Existing cartridge code is PX01MP2
- Required nominal rating is 1 micron
- Required format is MaxiPlus 4.5" × 20"
- You require sediment filtration rather than carbon treatment
- The installed housing accepts 20-inch MaxiPlus cartridges
- System cartridge sequence has been confirmed
- Existing housing and O-ring are serviceable
- Water can be safely isolated before servicing
DIY OR PROFESSIONAL SERVICE
Can the PX01MP2 Be Replaced Yourself?
Routine cartridge replacement may be practical where the complete filtration system is designed for owner maintenance and can be safely isolated, depressurised and correctly resealed.
The 20-inch MaxiPlus housings are significantly larger than standard under-sink filter bowls and can be heavy when full of water, so suitable access is important.
Professional servicing may be appropriate for whole-house and Hybrid installations.
Damaged housings, worn seals, seized bowls, valves, pumps, UV components or associated plumbing issues are separate from a routine PX01MP2 cartridge replacement.
ORDERING OPTIONS
Choose How You Want to Order
Supply Only
Order the genuine Puretec PX01MP2 for delivery to supported Australian locations where you have confirmed the correct replacement cartridge.
```
System Maintenance
Use the PX01MP2 as the specified fine sediment stage in compatible Puretec whole-house and Hybrid filtration systems.
Professional Service Option
Professional cartridge replacement may be available in eligible Brisbane and Gold Coast service areas.
```
COMMON QUESTIONS
Questions About the Puretec PX01MP2
What Is the Puretec PX01MP2?
It is a genuine Puretec 1 micron graded polyspun sediment cartridge in the large 20-inch MaxiPlus format.
What Is the Micron Rating?
The PX01MP2 has a nominal filtration rating of 1 micron.
What Size Is It?
Puretec specifies the cartridge as 4.5" × 20" MaxiPlus.
Is It a Standard 10-Inch Cartridge?
No. The PX01MP2 is substantially larger than a standard 2.5" × 10" sediment cartridge.
What Is the Flow Rate?
Puretec lists the individual PX01MP2 cartridge at up to 152 L/min.
Does That Mean My System Will Flow at 152 L/min?
No. Complete-system flow depends on the housings, other cartridges, UV equipment, pumps, pipework, pressure and overall system design.
What Does the PX01MP2 Reduce?
Puretec specifies dirt, rust, sand, silt, algae and other suspended particles.
Does It Reduce Chlorine?
No. The PX01MP2 is a sediment cartridge and does not contain activated carbon.
Does It Improve Taste & Odour?
Not as a dedicated treatment function. A separate compatible carbon stage is used where chlorine, taste or odour reduction is required.
Does It Suit the Puretec Hybrid E13?
Yes. Puretec currently specifies PX01MP2 as the fine sediment cartridge in the Hybrid E13 and E13AMC systems.
Does It Suit the Hybrid I13?
Yes. Puretec also specifies PX01MP2 in the current Hybrid I13.
Does It Suit the EM2-140?
Yes. PX01MP2 is the second filtration cartridge specified for the current EM2-140.
Does It Suit the EM2-150?
Yes. Puretec specifies PX01MP2 as the second-stage replacement cartridge for the EM2-150.
How Often Should It Be Replaced?
Follow the guide for the complete system. Current Puretec whole-house and Hybrid guidance commonly specifies approximately 6–12 months, depending on water quality and usage.
Can Installed Today Replace the PX01MP2?
Professional cartridge replacement may be available in eligible Brisbane and Gold Coast service areas where the filtration system is accessible and in serviceable condition.
WHY INSTALLED TODAY
Order the Correct Puretec PX01MP2 Cartridge
Supply First
Purchase the genuine Puretec cartridge without adding installation where you already have your own servicing arrangement.
```
Correct Specification
The PX01MP2 is identified correctly as a 1 micron, 4.5" × 20" MaxiPlus cartridge with a manufacturer-listed 152 L/min individual flow rate.
Installation Capability
If you prefer professional servicing, Installed Today may also be able to replace the cartridge in selected local service areas.
```
FINAL CHECK
Is the Puretec PX01MP2 the Right Cartridge for Your System?
The Puretec PX01MP2 is a genuine 1 micron graded polyspun sediment cartridge designed for fine particulate filtration in compatible high-flow Puretec systems.
It measures 4.5" × 20", uses Puretec's MaxiPlus format and has an individual manufacturer-listed flow rate of up to 152 L/min. It is specified in current systems including Hybrid E13, Hybrid E13AMC, Hybrid I13, EM2-140 and EM2-150 configurations.
Before ordering, confirm that your installed system specifically calls for PX01MP2. Do not substitute a 10-inch cartridge or a different micron rating solely because the cartridge looks similar. Follow the maintenance schedule for the complete system, inspect the housing O-ring during servicing, check for leaks after repressurisation and recommission the system according to the applicable Puretec instructions.
