The Puretec WH1-30 is a single-stage whole-house filtration system designed for mains and town water supplies. It uses one large-format carbon block cartridge to provide central treatment before water continues to applicable taps, showers and water-using fixtures throughout the property.
The current WH1-30-LF is supplied with Puretec's CB10MP1 10 micron MaxiPlus carbon block cartridge, which combines sediment filtration with chlorine, unwanted taste and odour treatment in a single cartridge.
Puretec lists the WH1-30 with a maximum flow rate of 30 litres per minute, a 1" BSP / 25 mm connection, no electrical power requirement and a 10-year system warranty.
*Puretec's current warranty is 1 year parts and labour plus 9 years parts only. Replacement cartridges are excluded and warranty conditions apply.
The WH1-30 differs from a dual-housing system because all standard filtration takes place through one CB10MP1 carbon block cartridge.
The 10 micron carbon block also provides filtration of suspended particulate material within its nominal rating.
Activated-carbon media provides chlorine reduction for compatible mains-water applications.
Puretec lists the CB10MP1 for reduction of unwanted taste and odour.
The WH1-30 is designed for customers who want central carbon filtration without a separate upstream sediment housing.
The one-cartridge layout means there is only one replacement cartridge during routine servicing, while still providing the chlorine, taste, odour and sediment treatment listed by Puretec for the system.
Where a dedicated sediment cartridge is preferred before the carbon stage, the Puretec WH2-30 provides a separate two-stage configuration.
The WH1-30 uses the Puretec CB10MP1, a bonded activated-carbon block cartridge in the MaxiPlus 4.5" × 10" format.
Puretec lists a nominal filtration rating of 10 micron.
The cartridge is listed by Puretec at a flow rate of up to 30 litres per minute.
Uses bonded activated-carbon media rather than loose granular carbon.
Designed for chlorine reduction within the cartridge's rated operating conditions.
Provides treatment for unwanted taste and odour in compatible water supplies.
Puretec also lists sediment reduction as a function of the CB Series carbon block.
Puretec currently lists the CB10MP1 with a nominal treatment capacity of up to 196,841 litres.
That figure should not be treated as a guaranteed cartridge life for every installation. Puretec notes that capacity depends on incoming water quality and flow, and also provides time-based replacement guidance.
Puretec currently describes the WH1 Series as general-purpose filtration for mains water, reducing:
The CB10MP1 can reduce sediment, but the WH1-30 does not have a separate sediment pre-filter.
If the incoming water contains higher sediment loading, a dual-stage system can provide a dedicated particulate cartridge before the carbon stage.
Single CB10MP1 cartridge performs the standard carbon and sediment treatment.
Uses PX05MP1 sediment filtration first and CB10MP1 carbon filtration second.
Puretec currently lists the WH1-30 at a maximum flow rate of 30 litres per minute and identifies it for small-to-medium residential applications.
Final sizing should still consider the property's actual simultaneous water demand rather than relying on a household-size description alone.
Puretec's current WH1-30 product specification lists a maximum system pressure of 520 kPa.
The installed plumbing arrangement should keep the filtration assembly within the current manufacturer specification.
Puretec describes the current WH1-30 as a heavy-duty whole-house filtration system.
Puretec lists an integrated rust-proof, anti-flex aluminium wall-mount bracket.
The filtration assembly has no automatic regeneration valve or internal pumping system.
The WH1-30 operates using the property's incoming water pressure.
Puretec lists the CB10MP1 replacement cartridge as the filtration stage supplied for the system.
Only one large-format filter housing needs to be serviced during routine cartridge replacement.
The standard WH1 assembly is designed around a bracket-mounted housing rather than an enclosed freestanding cabinet.
| Specification | Puretec WH1-30 |
|---|---|
| Current Model | WH1-30-LF |
| Application | Whole-house / whole-building mains-water filtration |
| Size Guide | Small to medium residence |
| Filtration Stages | 1 |
| Replacement Cartridge | CB10MP1 |
| Cartridge Type | Bonded activated-carbon block |
| Cartridge Size | MaxiPlus 4.5" × 10" |
| Nominal Micron Rating | 10 micron |
| Maximum Flow Rate | 30 L/min |
| Maximum Pressure | 520 kPa |
| Maximum Temperature | 52°C; protect from freezing |
| Connection | 1" BSP / 25 mm |
| Electrical Power | Not required |
| Moving Parts | None in the filtration assembly |
| Warranty | 10 years – 1 year parts and labour plus 9 years parts only, excluding cartridges and subject to conditions |
| Feature | WH1-30 | WH1-60 |
|---|---|---|
| Filtration Stages | 1 | 1 |
| Carbon Cartridge | CB10MP1 | CB10MP2 |
| Cartridge Size | 4.5" × 10" | 4.5" × 20" |
| Maximum Flow | 30 L/min | 60 L/min |
| Connection | 1" / 25 mm | 1½" / 40 mm |
| Feature | WH1-30 | WH2-30 |
|---|---|---|
| Housing Count | 1 | 2 |
| Stage 1 | CB10MP1 carbon block | PX05MP1 5 micron sediment |
| Stage 2 | Not applicable | CB10MP1 carbon block |
| Maximum Flow | 30 L/min | 30 L/min |
| Connection | 1" / 25 mm | 1" / 25 mm |
| Dedicated Sediment Pre-Filter | No | Yes |
The standard WH1-30 contains one carbon block cartridge. It does not contain a water-softening, ScaleProtect™ or other dedicated hardness-treatment stage.
If hardness or scale is the treatment concern, select a suitable Puretec softener or dedicated scale-control system separately.
Puretec's WH maintenance guide identifies the CB10MP1 as the replacement cartridge for the WH1-30.
Puretec's maintenance guidance states cartridges should generally be replaced within a 6–12 month service window and notes that cartridge changing at approximately six months can be required depending on water quality and usage.
Follow the applicable Puretec service interval rather than leaving the cartridge indefinitely.
Replace the cartridge if its applicable treatment capacity is reached before the time interval.
Puretec recommends replacement if unwanted taste or odour begins to return.
Increasing cartridge restriction can reduce available flow and indicate servicing is required.
Inspect the housing seal whenever the filter bowl is opened.
Puretec specifies genuine replacement cartridges to maintain performance, warranty and applicable standards.
Puretec's WH maintenance guide recommends replacing housing O-rings approximately every 3–5 years to help maintain a watertight seal.
Existing damaged housings, worn seals, faulty valves or unrelated plumbing defects are separate repair items and are not corrected simply by replacing the filter cartridge.
The WH1-30 is designed for permanent installation on the mains-water line so filtered water can continue to applicable outlets downstream.
Installation planning should consider the 25 mm connection, incoming pressure, wall mounting, isolation valves and enough clearance beneath the housing for future cartridge replacement.
The WH1-30 is supplied as an exposed wall-mounted filter housing rather than an enclosed FilterWall-style system.
The installation position should meet Puretec's current requirements and provide appropriate protection, structural support and service access for the housing and connected plumbing.
Do not assume unrestricted outdoor exposure simply because the system is designed for whole-house use.
Puretec currently lists the WH1-30 with a 10-year warranty.
Puretec specifies genuine replacement cartridges for maintaining system performance, warranty and applicable standards.
Order the Puretec WH1-30 for delivery to supported Australian locations where you already have a suitable installation arrangement.
The manufacturer-listed replacement cartridge for the WH1-30 is the genuine Puretec CB10MP1.
Professional installation may be available in eligible Brisbane and Gold Coast service areas, subject to plumbing, pressure, mounting position and site access.
Puretec currently lists the system as WH1-30-LF.
Yes. It is designed for point-of-entry filtration of mains or town water before the supply continues through the property.
One. The WH1-30 is a single-stage filtration system.
Puretec specifies the CB10MP1 10 micron MaxiPlus carbon block.
The CB10MP1 is a 4.5" × 10" MaxiPlus cartridge.
Puretec lists the CB10MP1 for chlorine, unwanted taste, odour and sediment reduction.
Puretec lists a maximum flow rate of 30 litres per minute.
The current WH1-30 uses a 1" BSP / 25 mm connection.
Puretec's current WH1-30 product page lists a maximum pressure of 520 kPa.
No. The filtration assembly operates without electrical power.
No. The CB10MP1 provides both carbon treatment and nominal 10 micron sediment filtration. The WH2-30 adds a separate 5 micron PX05MP1 sediment stage before the same carbon cartridge.
No. The WH1-30 does not contain a water-softening or dedicated scale-control stage.
Puretec's current WH1-30 product information does not specifically list PFAS reduction for the WH1-30, so this product listing does not apply that claim.
Puretec's WH maintenance guidance uses a 6–12 month replacement window and notes approximately six-month servicing depending on water quality and usage. Replace sooner if applicable capacity is reached, flow becomes restricted or unwanted taste or odour returns.
Puretec recommends replacing housing O-rings approximately every 3–5 years.
Puretec lists a 10-year warranty consisting of 1 year parts and labour plus 9 years parts only. Cartridges are excluded and warranty conditions apply.
Purchase the Puretec WH1-30 without installation where you already have a suitable installer or servicing arrangement.
The WH1-30 is matched to Puretec's CB10MP1 rather than incorrectly describing it as a separate sediment-and-carbon twin system.
Installed Today can also support eligible local installations where plumbing size, system pressure, mounting position and future service access are suitable.
The Puretec WH1-30 Whole House Water Filter is designed for mains-water properties wanting straightforward single-stage carbon filtration at the point of entry.
The current WH1-30-LF uses one CB10MP1 10 micron, 4.5" × 10" MaxiPlus carbon block cartridge, has a manufacturer-listed maximum flow rate of 30 L/min, uses a 1" BSP / 25 mm connection and is listed at a maximum pressure of 520 kPa.
Before ordering, confirm that 30 L/min suits the property's peak demand, that the 25 mm connection matches the plumbing and that a single carbon stage suits the incoming water conditions. Where a dedicated sediment pre-filter is required, compare the WH2-30. Where hardness reduction, scale control, UV treatment or another specialist process is required, select that treatment separately rather than assuming it is included with the WH1-30.
Buying a new hot water system, water filter, pump or plumbing product should be simple. Installed Today helps you compare the product, the supply-only price and the available installation options in one place, so you can choose what suits your home, budget and timing without the back and forth.
Whether you already know exactly what you need or you are still comparing options, we make it easier to order with confidence.
Choose the product on its own, or add installation where available. This gives you the flexibility to buy the way that suits you best.
See your product price upfront, then add the installation options or common extras you need before placing your order. No confusing quote forms just to understand your starting price.
Key specs, sizing details, warranty information, product features and suitability notes are shown clearly, so you can compare products properly before you buy.
Where relevant, you can add common installation extras such as valve kits, bases, electrical options, removal, access-related items or other site-specific upgrades before checkout.
Our product and installation options are selected with common local homes, water quality, plumbing layouts, access issues and replacement requirements in mind.
Add the product and selected extras to cart in one order, instead of trying to organise separate suppliers, installers and parts.
Not sure which product, size or installation option is right? Installed Today gives you a clearer path to choosing the right system before you order.
Installed Today is built for customers who want a faster, clearer and more convenient way to buy.
Instead of guessing what is included, waiting for basic pricing or trying to work out which extras are needed, you can review the product, compare your options and move forward with confidence.
Choose supply only if you just need the product.
Choose supplied and installed if you want the product installed where available.
Add common extras before checkout if your job needs additional parts or site-specific options.
It is a simpler way to organise the product and the parts of the job that matter most.
Installation availability, inclusions and add-ons vary by product type, site access, existing services, selected options and your property requirements. Some installations may require additional work, upgrades or checks before the job can proceed.
Same Day Delivery: Available in Brisbane and Gold Coast on select units ordered before 8:00am
Express Delivery: 1–4 business days
Standard Delivery: 2–8 business days
Same day delivery is available for selected hot water systems in Brisbane and Gold Coast metro areas when ordered before 8:00am, subject to stock availability, delivery capacity and suitable transport conditions.
Most hot water orders in metro areas are delivered quickly, with around 90% arriving within 1 business day.
Hot water systems cannot always be transported safely by courier during rain. Delivery timeframes may be affected when wet weather impacts safe handling, loading, unloading or transport conditions.
If your express delivery order takes longer than 1–4 business days, we will adjust the delivery timeframe to our standard 2–8 business days and refund your express shipping charge automatically.
We will send your delivery details as soon as your order has been dispatched.
Need help with your delivery? Contact our team and we’ll be happy to assist.
Helpful Installed Today guides covering whole home water filtration, drinking water filters, under-sink systems, reverse osmosis, Puretec filters and water quality.
