HOT WATER & OUTDOOR EQUIPMENT SUPPORT
600mm Ripple Concrete Support Base
The 600mm Ripple Concrete Support Base provides a solid raised platform for compatible hot water systems, heat pumps and selected outdoor equipment where a suitable support base is required.
The precast concrete construction provides a firm installation surface and helps keep the supported appliance elevated above surrounding soil and ground moisture.
Its 600mm diameter makes it suitable for selected cylindrical hot water systems and other equipment whose complete footprint fits safely on the base.
Before ordering, check the actual appliance dimensions, foot positions, filled operating weight and manufacturer base requirements. A 600mm base should not be assumed suitable for every heat pump or storage water heater simply because the nominal tank diameter is close to 600mm.
Quick answer: use this 600mm concrete base where your selected hot water system, heat pump or outdoor unit requires a stable raised support and the entire equipment footprint can be safely supported by the base. Installation suitability still needs to be checked against the actual appliance manufacturer requirements.
PRODUCT PURPOSE
What Is a 600mm Ripple Concrete Support Base?
This is a precast concrete equipment base designed to create a stable support surface between the appliance and the prepared ground below.
The base is particularly useful where a hot water system or heat pump cannot be installed directly on soil, grass or another unsuitable surface.
The rippled top surface provides texture across the support area, while the solid concrete construction creates a durable platform for compatible outdoor equipment.
COMMON APPLICATIONS
What Can the Concrete Base Be Used For?
Heat Pump Hot Water
Suitable for selected integrated heat pumps where the appliance footprint, feet and manufacturer installation requirements fit within the 600mm support area.
Storage Hot Water
Can provide a stable base for compatible electric or gas storage water heaters installed at ground level.
Outdoor Equipment
Can also suit selected outdoor equipment where the unit dimensions, weight and installation instructions allow a 600mm concrete support base.
KEY FEATURES
600mm Ripple Concrete Base Features
Precast Concrete Construction
Provides a firm, durable support surface for compatible equipment installed at ground level.
600mm Diameter
Compact circular footprint suited to selected hot water systems and outdoor appliances.
Rippled Surface
The textured top surface provides a defined equipment support area and helps avoid a completely smooth contact surface.
Raises Equipment Above Ground
Helps separate the supported appliance from surrounding soil, grass and normal ground moisture.
WHY A BASE MATTERS
Why Does a Hot Water System Need a Stable Base?
Storage water heaters and integrated heat pumps can become very heavy once filled with water.
A suitable base provides a stable surface capable of supporting the appliance in its intended upright position and helps avoid installing the system directly onto loose or uneven ground.
The final installation still needs to satisfy the particular appliance manufacturer's requirements for level, support, drainage and stability.
The base does not correct unstable ground underneath it. The installation area must be properly prepared so the concrete base itself remains supported, level and stable.
600MM SIZE
Will a 600mm Base Fit My Hot Water System?
Compatibility depends on the complete equipment footprint, not just the advertised cylinder diameter.
Some heat pumps have fan housings, feet, plumbing guards or cabinet sections that extend beyond the tank diameter. Others require all support feet to sit on the load-bearing surface.
Before purchasing, check:
- Overall appliance width and depth
- Location of support feet
- Manufacturer minimum base dimensions
- Filled operating weight
- Required clearances around the appliance
- Drainage around the installation area
A 600mm-diameter tank does not automatically mean a 600mm support base is suitable. Check the actual manufacturer installation drawing for the selected system.
HEAT PUMP INSTALLATIONS
Can the Base Be Used Under a Heat Pump?
Yes, where the specific heat pump manufacturer permits the appliance to be installed on a base of this size and type.
Integrated heat pumps generally need a stable, level support as well as adequate airflow, condensate drainage and service clearance.
The support base only addresses the physical foundation beneath the appliance. It does not replace the other installation requirements.
FILLED WEIGHT
Why Should Filled System Weight Be Checked?
A hot water system is considerably heavier in operation than it is when delivered empty.
For example, a large storage or heat pump water heater can contain hundreds of litres of water in addition to the appliance's own weight.
The base and the ground beneath it therefore need to support the complete filled operating weight of the selected appliance.
Use the manufacturer's filled-weight or tank-capacity information when assessing the installation position.
GROUND PREPARATION
What Surface Should the Concrete Base Sit On?
The base should be installed on a suitably prepared, stable and reasonably level supporting surface.
The exact preparation required depends on the site, but the finished base should not rock, sink unevenly or sit on loose ground that cannot support the installed appliance.
- Remove unstable loose material where required
- Provide firm support beneath the complete base
- Install the base level
- Avoid positions subject to obvious erosion or washout
- Maintain suitable drainage around the appliance
- Keep the finished installation accessible for servicing
MOISTURE & DRAINAGE
Does a Concrete Base Help With Ground Moisture?
The concrete base raises the supported appliance above the immediate surrounding ground surface, helping separate the bottom of the unit from soil, grass and normal surface moisture.
It does not waterproof the appliance or remove the need for appropriate site drainage.
Heat pumps also produce condensate during operation, so the condensate outlet and any relief-valve drainage still need to be directed to an appropriate discharge location.
LEVEL INSTALLATION
Why Does the Base Need to Be Level?
Hot water systems are generally intended to operate upright on a level support.
A level base helps ensure the appliance sits as intended, maintains the correct orientation of internal components and allows drainage systems such as heat-pump condensate outlets to operate correctly.
The appliance manufacturer may specify a maximum allowable installed tilt. Those requirements still apply when using this support base.
WHAT IT DOES NOT DO
What Is Not Included With the Concrete Support Base?
No Plumbing Installation
The concrete base itself does not include hot water plumbing, valve installation or pipework unless those services are purchased separately.
No Electrical Work
Electrical circuits, outlets, isolators, connection changes and other electrical work are separate.
No Major Civil Work
Excavation, retaining work, significant ground remediation and major landscaping are not included with the base product.
No Universal Compatibility
The 600mm base is not guaranteed to suit every water heater, heat pump or outdoor appliance.
INSTALL IT WITH YOUR NEW HOT WATER SYSTEM
Add the Correct Support Base Before Installation
If the selected hot water system requires a suitable ground-level base and the existing installation area does not already provide one, the 600mm Ripple Concrete Support Base can be added to the order where compatible.
This allows the installation team to position the new system on a defined stable support rather than relying on unsuitable soil, pavers or an undersized existing platform.
Check compatibility before ordering so the base size matches the actual appliance footprint and manufacturer instructions.
EXISTING BASES
Do I Need a New Base If One Is Already There?
Not necessarily.
An existing concrete slab or support may be reused where it is stable, level, appropriately sized and suitable for the replacement appliance.
A new support base is useful where the existing surface is:
- Too small for the new unit
- Cracked or unstable
- Uneven
- Loose or rocking
- Directly on soil or grass
- Unable to support all appliance feet
- Unsuitable under the manufacturer installation instructions
BEFORE ORDERING
What Should You Check Before Buying the 600mm Base?
- Overall equipment footprint fits the base
- All required support points fit on the base
- The manufacturer permits this type of support
- The installation area can be prepared level
- The supporting ground is stable
- Filled appliance weight can be safely supported
- Required plumbing clearances remain available
- Heat-pump airflow clearances remain available
- Condensate and relief drainage can still be provided
- Future service access is not obstructed
COMMON QUESTIONS
Questions About the 600mm Ripple Concrete Support Base
What Size Is the Support Base?
The support base has a nominal 600mm diameter.
What Is It Made From?
It is a precast concrete support base.
What Is the Rippled Surface For?
The rippled surface provides texture across the top of the concrete base and creates a defined support surface for compatible equipment.
Can It Be Used for a Heat Pump Hot Water System?
Yes, where the selected heat pump's complete support footprint and manufacturer requirements are compatible with the 600mm base.
Can It Be Used for Electric Storage Hot Water?
Yes, where the storage cylinder fits safely on the base and its manufacturer installation requirements are satisfied.
Can It Be Used for Gas Storage Hot Water?
Potentially, provided the appliance dimensions, filled weight and manufacturer support requirements are suitable.
Can It Be Used for Outdoor Equipment?
Yes, for selected outdoor equipment where the equipment manufacturer allows installation on a compatible concrete support base.
Does a 600mm Tank Always Fit?
No. The complete equipment footprint, including support feet and cabinet projections, needs to fit safely on the base.
Why Does Filled Weight Matter?
The supporting surface needs to carry the appliance plus the water stored inside it during normal operation.
Can the Base Sit Directly on Loose Soil?
The base should sit on a stable, properly prepared supporting surface so it remains level and does not settle unevenly.
Does It Need to Be Level?
Yes. The support base should be installed level so the appliance can be positioned in accordance with its manufacturer requirements.
Does the Base Stop Ground Moisture?
It raises the appliance above the immediate surrounding ground surface, but it does not waterproof the equipment or replace proper site drainage.
Does It Include Installation?
The support base product and installation labour are separate unless the selected package specifically includes placement of the base.
Does It Include Excavation?
No. Major excavation, civil work, retaining work or ground remediation is not automatically included.
Does It Include Plumbing or Electrical Work?
No. Plumbing and electrical work are separate installation services.
Can I Use My Existing Slab Instead?
Yes, where the existing support is appropriately sized, stable, level and suitable for the replacement appliance.
How Do I Know Whether This Base Is Large Enough?
Compare the 600mm base diameter with the appliance manufacturer's installation drawing, overall footprint and support-foot positions before ordering.
FINAL CHECK
Is the 600mm Ripple Concrete Support Base Right for Your Installation?
Choose this concrete support base where your selected hot water system, heat pump or compatible outdoor appliance requires a stable ground-level platform and its complete support footprint fits safely within the 600mm diameter.
The base provides a durable raised support surface, but correct installation still depends on suitable ground preparation, level positioning, filled equipment weight, drainage and the appliance manufacturer's requirements.
Before adding the base to your order, check the actual system dimensions and support points rather than relying only on the advertised tank diameter.
Experience the "Installed Today" Difference with Our Verified Installers
When you choose "Installed Today" for your installation needs, you're not just getting a product; you're gaining access to a network of rigorously verified installers dedicated to providing you with an exceptional service experience. Here's what you can expect when you opt for an installation by an "Installed Today" verified installer:
Professional and Efficient Service
- Prompt Communication: Our verified installers will contact you within 2 business hours of receiving your order details to confirm and begin scheduling your installation at the earliest convenience.
- Expert Installation: All "Installed Today" installers are highly skilled and qualified, ensuring your product is installed according to the highest industry standards and specific regulations in your area.
- Clear and Professional Communication: From the moment they receive your order until the completion of your installation, our installers maintain clear and professional communication, providing you with all necessary information regarding your installation.
Peace of Mind
- Insurance and Liability: Every "Installed Today" verified installer maintains comprehensive insurance coverage, giving you peace of mind knowing you're protected throughout the installation process.
- Warranty and Quality Assurance: Enjoy a warranty on your installation, guaranteeing rectification work at no additional charge in the unlikely event of any deficiencies. Our installers strive to achieve a minimum 4.5-star average rating across major review platforms, reflecting our commitment to excellence and customer satisfaction.
Customer-Centric Policies
- Customer Dispute Resolution: In the rare event of a dispute, our installers are committed to acknowledging and initiating the resolution process within 1 business day, aiming for a swift and satisfactory resolution within 5 business days.
- Rectification Work Timeframes: Should any rectification work be necessary, it will be acknowledged within 1 business day and completed within 2 business days, ensuring minimal inconvenience to you.
Additional Services at Transparent Rates
- Beyond Basic Installation: Our verified installers offer a range of additional services to complement your installation. All available services and their set rates are communicated upfront, ensuring no surprises.
By choosing "Installed Today," you're not just installing a product; you're investing in a seamless, quality service that values your time and peace of mind. Trust in our verified installers to exceed your expectations with their professionalism, expertise, and commitment to excellence.
This product description outlines the benefits and assurances provided by "Installed Today" verified installers, designed to inform and reassure customers about the high level of service they can expect.
Hot Water Installation Add-Ons
View all
Recently viewed