The Puretec SOL30-E1 is a WaterMark approved domestic water softener designed to reduce hardness minerals and the scale and spotting associated with hard water.
Puretec combines a 30 L/min service flow rate with its Automatic E1-matic valve. The E1 version uses automatic, time-based regeneration at programmed intervals rather than the volumetric water-use control used by Puretec's E3 models.
The SOL30-E1 is a genuine regenerating ion-exchange water softener. It uses softening resin, water-softener salt, electrical power and a drain connection as part of its normal operation.
*Puretec bases the published 12,000 litre capacity on water hardness of 100 ppm. Practical regeneration requirements depend on the property's actual hardness and water consumption.
Hard water contains dissolved minerals that can contribute to scale, spotting and mineral residue.
The SOL30-E1 uses ion-exchange softening media to reduce hardness before the treated water continues through the property.
Puretec specifies the SOL30-E1 for reducing calcium and other minerals associated with hard water.
Reducing hardness can reduce the formation of mineral scale within compatible downstream plumbing and equipment.
Puretec identifies reduced scaling and spotting as core functions of the Softrol™ range.
The SOL30-E1 is designed to reduce hardness using regenerating ion-exchange media.
During regeneration, brine made from water-softener salt is used to restore the softening resin so it can continue treating hardness minerals.
This is a different process from salt-free AntiScale cartridges, which are intended to manage scale formation without performing conventional ion-exchange hardness removal.
The SOL30-E1 uses Puretec's Automatic E1-matic valve.
Puretec's current user guide states that the E1 valve is factory set to regenerate every third day. The required regeneration frequency depends on hardness and the amount of water used, so the interval can be adjusted during commissioning.
| Feature | SOL30-E1 | SOL30-E3 |
|---|---|---|
| Valve | Automatic E1-matic | Volumetric E3-matic |
| Regeneration Control | Time-based at programmed intervals | Based on measured water consumption |
| Service Flow Rate | 30 L/min | 30 L/min |
| Published Nominal Capacity | 12,000 L at 100 ppm hardness | 12,000 L at 100 ppm hardness |
| Main Difference | Automatic timer-controlled regeneration | Volumetric regeneration according to water use |
Puretec publishes a nominal 12,000 litre capacity based on 100 ppm hardness for the SOL30-E1.
Actual regeneration timing should still be configured around the property's incoming hardness and water use. Harder water consumes more softening capacity per litre than lower-hardness water.
Puretec's SOL-E1 guide provides an installation record for incoming water conditions including hardness and other relevant parameters.
Puretec notes that its softeners are designed for hardness reduction and can handle reasonable amounts of soluble iron where iron content is considered during model selection and regeneration setup.
The SOL30-E1 is not a salt-free system.
Salt is consumed during regeneration and needs to be replenished periodically for continued softening operation.
Puretec's current SOL-E1 user guide lists brine-tank salt storage capacity at approximately 50 kg.
Puretec recommends replenishing the salt before the supply is exhausted and maintaining an appropriate salt level in the brine tank.
Puretec lists a free-chlorine tolerance of 1 ppm for the softening resin.
The manufacturer warns that higher chlorine levels can permanently damage the resin and recommends a carbon pre-filter where chlorine exceeds this limit.
Puretec also recommends carbon pre-filtration more generally to protect against chlorine spikes and prolong resin service life.
Puretec instructs installers to position the SOL-E1 softener in the water supply line before the water heater.
The unit should also be positioned close to suitable drainage while leaving adequate space for servicing and salt replenishment.
| Specification | Puretec SOL30-E1 |
|---|---|
| Model | SOL30-E1 |
| Product Type | Softrol™ automatic domestic water softener |
| Valve | Automatic E1-matic |
| Regeneration | Automatic time-based regeneration |
| Service Flow Rate | 30 L/min |
| Maximum Flow Rate | 70 L/min |
| Published Nominal Capacity | 12,000 litres based on 100 ppm hardness |
| Water Connection | 1" Male BSPT |
| Operating Pressure | 138–862 kPa |
| Pressure Limiting | Approved pressure limiting required where line pressure exceeds 500 kPa |
| Operating Temperature | 0–48°C on Puretec's current product information; protect from freezing |
| Power Supply | 230V AC / 50 Hz listed on current product specification |
| Width | 350 mm |
| Height | 1125 mm |
| Depth | 490 mm |
| Dry Weight | Approx. 28 kg |
| Salt Storage | Approx. 50 kg |
| WaterMark | Approved |
| Replacement Media Kit | RMK-SOL30 |
The SOL30-E1 is a full-size point-of-entry water softener, not an under-sink drinking-water filter.
Allow additional clearance for the water connections, control valve, power, regeneration drainage and access to replenish salt.
Puretec lists a minimum and maximum operating pressure of 138–862 kPa.
Where the incoming line pressure exceeds 500 kPa, Puretec requires an approved pressure limiting device in accordance with the applicable Australian and New Zealand plumbing requirements.
The SOL30-E1 uses an electronic control valve and requires a suitable non-switched mains power supply.
Puretec's current product specification lists 230V AC / 50 Hz. The user guide also specifies a CR2032 backup battery for maintaining time during interruptions, with annual battery replacement recommended.
The SOL30-E1 regenerates and backwashes its softening media, so spent regeneration water must be discharged to a suitable drain.
The installation should therefore be planned around accessible drainage rather than treating the system like a passive inline cartridge housing.
Puretec states that the SOL-E1 installation should be completed by qualified tradespeople and is not intended as a DIY installation project.
For point-of-entry installations, the manufacturer also specifies approved backflow prevention.
The SOL30-E1 is primarily a hardness-reduction system.
| Feature | SOL30-E1 | SOL40-E1 |
|---|---|---|
| Valve | Automatic E1-matic | Automatic E1-matic |
| Service Flow Rate | 30 L/min | 40 L/min |
| Maximum Flow Rate | 70 L/min | 100 L/min |
| Published Nominal Capacity | 12,000 L | 18,000 L |
| Regeneration Type | Time-based | Time-based |
| Water Connection | 1" Male BSPT | 1" Male BSPT |
Puretec's published capacity figures are based on 100 ppm hardness. Choose the model around actual peak flow, hardness and treatment demand rather than a generic household-size label.
Check the brine tank regularly and replenish suitable water-softener salt before the supply is exhausted.
Puretec lists the RMK-SOL30 replacement media kit for the SOL30-E1.
Where upstream filtration is fitted, service its cartridges according to the applicable Puretec instructions.
The E1 interval should remain appropriate for the property's hardness and water consumption.
Puretec recommends replacing the CR2032 backup battery annually or after extended periods without power.
Regularly inspect accessible connections and the system for signs of leakage or deterioration.
Optional bypass assembly for testing and maintenance.
Optional blending valve where partial hardness reduction is required.
Puretec hardness titration test kit for checking incoming or treated water.
Optional microswitch for automation of compatible external equipment.
Puretec SoftenerSafe media accessory for compatible maintenance applications.
Genuine Puretec replacement media kit listed for the SOL30-E1 system.
Puretec currently lists the SOL30-E1 with a 6-year warranty, structured as 1 year parts and labour plus 5 years parts only, excluding consumables and subject to Puretec's warranty conditions.
Puretec currently identifies qualifying pre-filter models including WH2-55, WH2-60, FilterWall F3, FilterWall F4, FilterWall F5 and FilterWall F6.
Order the Puretec SOL30-E1 for delivery to supported Australian locations where you already have an appropriately qualified installer.
Consider an appropriate Puretec whole-house sediment and carbon system where the incoming water requires filtration before the softener.
Professional installation may be available in eligible Brisbane and Gold Coast service areas, subject to plumbing, drainage, power, water conditions and site access.
It reduces hardness minerals such as calcium and magnesium and is designed to reduce scaling and spotting associated with hard water.
Puretec lists a 30 L/min service flow rate.
Puretec's current SOL Series specification lists a maximum flow rate of 70 L/min for the SOL30-E1. System selection should still be based on the manufacturer's service-flow and regeneration requirements.
Puretec lists a nominal 12,000 litre capacity based on 100 ppm hardness.
The E1 version uses Puretec's Automatic E1-matic valve with time-based regeneration at programmed intervals.
Not directly. The SOL30-E1 uses a programmed time-based regeneration schedule. Water hardness and consumption are considered when choosing the appropriate regeneration interval.
Puretec's current SOL-E1 guide states that the E1 valve is factory set to regenerate every third day. The interval should be adjusted where required to suit hardness and water use.
Yes. The SOL30-E1 is a regenerating ion-exchange water softener and uses water-softener salt.
Puretec lists approximately 50 kg of salt storage capacity.
Yes. The electronic E1-matic valve requires a suitable mains power supply.
Yes. Regeneration and backwashing discharge water and require suitable drainage.
Yes. Puretec identifies the SOL30-E1 as a WaterMark approved water softener.
Puretec lists 138–862 kPa. An approved pressure limiting device is required where line pressure exceeds 500 kPa.
Approximately 1125 mm high × 350 mm wide × 490 mm deep.
The SOL30-E1 is primarily a hardness-reduction system rather than a carbon chlorine filter. Puretec recommends appropriate carbon pre-filtration to help protect its softening resin.
Puretec lists the RMK-SOL30 replacement media kit for the SOL30-E1.
Purchase the Puretec SOL30-E1 without installation where you already have an appropriately qualified installer.
The SOL30-E1 is identified correctly as Puretec's automatic time-based model rather than being described as the volumetric SOL30-E3.
Installed Today can also support eligible local installations where water conditions, plumbing, drainage, power and site access are suitable.
The Puretec SOL30-E1 Softrol™ Water Softener is designed for properties requiring genuine hardness reduction with a 30 L/min service flow rate and automatic time-based regeneration.
Puretec lists a nominal 12,000 litre capacity at 100 ppm hardness, a 1" Male BSPT water connection, 138–862 kPa operating pressure, WaterMark approval and cabinet dimensions of approximately 1125 × 350 × 490 mm. The current SOL-E1 guide lists a dry weight of approximately 28 kg and around 50 kg of salt storage.
Before ordering, test the incoming hardness and other relevant water conditions, confirm the required household flow, provide suitable plumbing, power and drainage, allow for ongoing salt replenishment and consider carbon pre-filtration to protect the softening resin. If regeneration based directly on measured water consumption is preferred, compare the SOL30-E3 volumetric model before selecting the final system.
Buying a new hot water system, water filter, pump or plumbing product should be simple. Installed Today helps you compare the product, the supply-only price and the available installation options in one place, so you can choose what suits your home, budget and timing without the back and forth.
Whether you already know exactly what you need or you are still comparing options, we make it easier to order with confidence.
Choose the product on its own, or add installation where available. This gives you the flexibility to buy the way that suits you best.
See your product price upfront, then add the installation options or common extras you need before placing your order. No confusing quote forms just to understand your starting price.
Key specs, sizing details, warranty information, product features and suitability notes are shown clearly, so you can compare products properly before you buy.
Where relevant, you can add common installation extras such as valve kits, bases, electrical options, removal, access-related items or other site-specific upgrades before checkout.
Our product and installation options are selected with common local homes, water quality, plumbing layouts, access issues and replacement requirements in mind.
Add the product and selected extras to cart in one order, instead of trying to organise separate suppliers, installers and parts.
Not sure which product, size or installation option is right? Installed Today gives you a clearer path to choosing the right system before you order.
Installed Today is built for customers who want a faster, clearer and more convenient way to buy.
Instead of guessing what is included, waiting for basic pricing or trying to work out which extras are needed, you can review the product, compare your options and move forward with confidence.
Choose supply only if you just need the product.
Choose supplied and installed if you want the product installed where available.
Add common extras before checkout if your job needs additional parts or site-specific options.
It is a simpler way to organise the product and the parts of the job that matter most.
Installation availability, inclusions and add-ons vary by product type, site access, existing services, selected options and your property requirements. Some installations may require additional work, upgrades or checks before the job can proceed.
Same Day Delivery: Available in Brisbane and Gold Coast on select units ordered before 8:00am
Express Delivery: 1–4 business days
Standard Delivery: 2–8 business days
Same day delivery is available for selected hot water systems in Brisbane and Gold Coast metro areas when ordered before 8:00am, subject to stock availability, delivery capacity and suitable transport conditions.
Most hot water orders in metro areas are delivered quickly, with around 90% arriving within 1 business day.
Hot water systems cannot always be transported safely by courier during rain. Delivery timeframes may be affected when wet weather impacts safe handling, loading, unloading or transport conditions.
If your express delivery order takes longer than 1–4 business days, we will adjust the delivery timeframe to our standard 2–8 business days and refund your express shipping charge automatically.
We will send your delivery details as soon as your order has been dispatched.
Need help with your delivery? Contact our team and we’ll be happy to assist.
Helpful Installed Today guides covering whole home water filtration, drinking water filters, under-sink systems, reverse osmosis, Puretec filters and water quality.
